Professional Documents
Culture Documents
Longitudinal Shear Force
Longitudinal Shear Force
For full shear connection, the total design longitudinal shear V, to be resisted by
shear connectors between the point of maximum positive bending moment and the end
support should be:
For full shear connection, the total design longitudinal shear V, to be resisted by
shear connectors between the point of maximum positive bending moment and an
intermediate support shall be calculated according to Figure 6.13 as follows:
V, = F,, + (A, fsk )/ys where A, is the effective area of longitudinal slab
reinforcement.
This calculation is illustrated in Figure 6.13 for a particular case of the positions of
the plastic neutral axes in negative and positive bending.