Professional Documents
Culture Documents
No Compromise: JCB Lubricants
No Compromise: JCB Lubricants
No Compromise: JCB Lubricants
ALTERNATIVE LEVELS
OF PERFORMANCE AND JCB OPTIMUM PERFORMANCE (OP)
QUALITY. Grey
CONTENTS
Hydraulic Fluid 04
Engine Oil 08
Gear Oil 12
Transmission Fluids 16
Ancillary Products 19
Grease 20
MACHINE’S HYDRAULIC Below are examples of how JCB hydraulic fluids outperform other hydraulic fluids that claim to be the same.
SYSTEM. MAXIMIZES
EFFICIENCY AND HELPS Demulsifying test: Foam test:
MINIMIZE DOWNTIME. JCB hydraulic fluid is designed to help prevent water contamination. This is a simple test where air is bubbled through a heated hydraulic
GENUINE JCB HYDRAULIC In the Demulsifying test the industry standard requirement is for
fluid to ascertain its resistance to foaming.
FLUIDS FEATURE HIGH hydraulic fluid and water to separate, at the latest, 30 minutes after Minimizing air bubbles in your hydraulic fluid caused by foam is
essential as air bubbles cause cavitation which in turn can cause:
QUALITY BASE OIL AND
being mixed together, so the water can be filtered out of the system.
If water is not removed quickly from the hydraulic system it can cause:
• Spongy hydraulic control response.
SOPHISTICATED ADDITIVES, • General reduction in the efficiency of the hydraulic fluid. • Heat retention (overheating) in the hydraulic fluid tank.
JCB oil separates from water in just 5 minutes! - Some low cost, poor It can be clearly seen that poor quality low cost oils do not contain the
Choosing anything other than the recommended JCB oil quality oils fail to separate, even after 30 minutes. In this test the same level of anti-foam additives. In this test the JCB product
is a false economy which can lead to inefficient machine JCB product clearly outperformed both the low cost clearly outperformed the low cost alternative.
operation, component wear and ultimately premature alternative and the industry standard requirement.
component failure.
ISO 6743-4, HV, DENISON HF-0, BOSCH REXROTH, VICKERS, DENISON HF-1, HF-2, HF-0, VICKERS I 286-S, M 2950-S, DENISON HF-1, HF-2, HF-0, VICKERS I 286-S, M 2950-S,
US STEEL, CINCINNATI MILACRON. CINCINNATI MACHINE P68, P69, P70 US STEEL 127, 136, CINCINNATI MACHINE P68, P69, P70, US STEEL 127, 136,
BOSCH REXROTH, SAUER DANFOSS. BOSCH REXROTH, SAUER DANFOSS.
BENEFITS
• Lasts throughout its prescribed service life (due to high thermal and oxidation
stability for high temperature applications).
• Suitable for use in JCB and many non-JCB machines.
• Trouble-free operation due to the unique combination of outstanding
demulsibility, foam, air release, hydrolytic stability and filterability characteristics.
• Can also be applied in other industrial equipment such as screw-air
compressors and lightly loaded gears.
PERFORMANCE CLASSIFICATION
DIN 51524-2: HLP, ISO 6743-4: HM.
MANUFACTURERS’ STANDARDS
HIGH QUALITY BASE OILS DK Oxidation test: engines, in particular where these engines
are equipped with after treatment systems
AND CAREFULLY SELECTED JCB Engine oil is blended to ensure that the oil continues to provide
efficient lubrication throughout its designated service interval life.
(such as DOC, DPF & SCR) operating on low
sulphur diesel fuel (50 ppm or below) and
ADDITIVES ENSURE JCB Some poor quality, low cost oils begin to breakdown leading to
under severe heavy duty conditions.
ENGINE OILS MEET OR excessive deposits which cause reduced lubrication and subsequently
increased wear.
EXCEED ALL INTERNATIONAL The DK Oxidation test is an industry standard test and shows how
SPECIFICATIONS. oxidation can form within engine oil. The image below is after 192 BENEFITS
hours and shows excessive deposits forming with poor quality low • A Tier 4i and Tier 4F engine oil.
• Specially developed formulation for ACEA E9 and API CJ-4 applications.
cost engine oil, while there are no deposits from the JCB oil. • Minimizes diesel particulate filter (DPF/CRT) plugging.
• Protects catalytic after treatment systems (SCR).
• Excellent protection against borepolishing and cam wear.
• Provides quick lubrication after cold starting thus limiting engine wear.
• Prevents engine fouling due to combustion soot.
PERFORMANCE CLASSIFICATION
API CJ-4/CI-4 PLUS/CI-4, ACEA E9.
MANUFACTURERS’ STANDARDS
CAT ECF-2/ECF-3, JASO DH-2, CUMMINS CES 20081, DEUTZ DQC III-10
LA, DETROIT DIESEL 93K218, MACK EO-O PREMIUM PLUS,
MAN M 3275-1/3575, MB 228.31, MTU DDC TYPE 2.1, RENAULT RLD-3,
VOLVO VDS-4, ALLISON C-4.
JCB ENGINE OIL UP 5W40 JCB ENGINE OIL UP 5W30 JCB ENGINE OIL UP 10W30
A full synthetic oil that is designed to protect JCB UP 5W30 is a ultra high performance JCB Engine Oil UP 10W-30 is an Ultra High
your engine against the harshest of environ- synthetic heavy duty engine oil with low Performance Diesel Engine Lubricant with
ments. The full synthetic base fluid combined sulphated ash, phosphorus and sulphur content Medium Sulphated Ash, Phosphorus and
with a unique additive system also delivers (low SAPS) designed for lubrication of T4i, T4F, Sulphur content (Mid SAPS) designed for the
low viscosity fuel savings performance with Euro IV, Euro V and Euro VI diesel engines lubrication of the latest USA EPA 2007 and
no compromise in durability. Ideal for Tier 4 giving excellent cold starting properties and EURO 5, T4i, T4F diesel engines. It is a low
and Tier 4 F exhaust emission regulations. fuel economy benefits.This product is ideal for viscosity SAE 10W-30 grade which offers fuel
JCB STANDARD: JCB STANDARD: all Euro IV, Euro V and Euro VI diesel engines JCB STANDARD: economy improvement.
4001/3400 4001/3100 equipped with a diesel particulate filter (DPF) 4001/3000
or catalytic after treatment systems (such as
SCR) operating on low sulphur diesel fuel (50
ppm or below) and under severe heavy duty
conditions. In addition it possesses excellent
cold starting properties.
JCB ENGINE OIL EP 15W40 JCB ENGINE OIL HP 10W30 JCB ENGINE OIL HP 20W50
An advanced, high specification engine oil, JCB HP 10W30 is a universal mixed fleet JCB HP 20W50 is a universal mixed fleet
suitable for use in on and off highway and in engine lubricant and is used in high engine lubricant and is used in high perfor-
commercial vehicle applications, including performance four stroke diesel engines, mance four stroke diesel engines, normally
those meeting Tier 2 and Tier 3 exhaust naturally aspirated as well as turbocharged aspirated as well as turbocharged or
emission regulations. Its outstanding or supercharged, operating under moderate supercharged, operating under moderate
protection for naturally aspirated, to heavy duty conditions. JCB HP 10W30 to heavy duty conditions. JCB HP 20W50
turbocharged and supercharged engines is used as an engine lubricant in off highway/ is used as engine lubricant in off highway/
JCB STANDARD: makes it the ideal choice for both single JCB STANDARD: construction applications, commercial JCB STANDARD: construction applications, commercial
4001/1800 and mixed fleet operations. 4001/1700 vehicles, buses or military equipment. 4001/1900 vehicles, buses or military equipment, when
one or more of the following specifications
below are used to describe the required
lubricant quality.
BENEFITS
• Truly universal application oil.
• Suitable for engines, transmissions and hydraulic systems.
• Excellent fluidity, ensuring easy starting and rapid hydraulic response.
• Rationalization reduces storage and handling costs and eliminates risk of
incorrect application.
• Excellent wear rate protection extends engine and component life.
• Can be used for power steering and PTOs where an engine oil is specified.
PERFORMANCE CLASSIFICATION
API CG-4, API GL-4, DIN 51524-3 : HVLP (-D), ACEA E3.
MANUFACTURERS’ STANDARDS
DEUTZ DQC I-02, ZF TE-ML 06A, 06B, 06C, 06F, 07B, AFNOR NFE
48603 HV, ALLISON C-4, CASE MS 1207, 1209, 1210, 1230, CNH MAT
3505, 3509, 3525, 3526, FORD M2C48-C3, M2C86-B, M2C134-D,
M2C159-B/C, JOHN DEERE JDM J20C, NEW HOLLAND 82009201/2/3,
NH 410B, 420A, MASSEY FERGUSON CMS M 1145, 1144, 1143, 1139, 1135,
SAE J306: SAE 75W-80.
PERFORMANCE AND for your JCB machine and its gear and transmission systems.
HIGH LEVELS OF WEAR JCB Engineering standards lay down performance levels and criteria
PROTECTION. THEY ARE for JCB Gear and Transmission oil which EXCEED OIL INDUSTRY
STANDARDS. The Copper Strip Test is just an example of how JCB
SUITABLE FOR A WIDE Gear and Transmission oils outperform other gear and transmission
RANGE OF APPLICATIONS.
fluids that claim to be the same.
As you can see from the discoloring on the copper strip below,
poor quality low cost oils will corrode copper components far
quicker than JCB oils.
JCB GEAR OIL EP 85W140 JCB GEAR OIL HP LS PLUS JCB GEAR OIL HP
A heavy duty multigrade gear lubricant, An SAE 80W90 multipurpose limited slip gear A highly refined paraffinic mineral oil,
suitable for use in gearboxes and final drives, oil designed for use in hypoid gears, axles containing extreme pressure additives and
where special anti-wear protection is required. and final drives. It is especially suited for those friction modifiers, suitable for a wide range
The high quality additive package and base oils with wet brake plates and limited slip (LS) of applications including axles, oil-immersed
protect against rust and corrosion, helping differentials. This oil also offers reduced brakes, clutches, transmissions and hydraulics.
to extend component life. Particularly suited ‘Brake Chatter’ and improved mechanical
for hypoid and spiral bevel type gears in transmission component life along with
JCB STANDARD: commercial vehicles and off-highway JCB STANDARD: excellent extreme pressure protection. JCB STANDARD:
4000/0600 equipment. 4000/3900 JCB Gear Oil LS Plus can be used for both 4000/0500
on and off-highway equipment.
Description Pack Size Part Number Description Pack Size Part Number Description Pack Size Part Number
JCB Gear Oil EP 85W140 5 Gallon/18.9L 4000/0605U JCB Gear Oil HP LS Plus 5 Gallon/18.9L 4000/3905U JCB Gear Oil HP 5 Gallon/18.9L 4000/0505U
JCB GEAR OIL HP PLUS JCB GEAR OIL HP 90 JCB GEAR OIL OP 75W140
A high performance gear oil specifically A heavy duty multipurpose gear oil, formulat- JCB Optimum Performance Gear Oil
developed for the JCB axle and transmission, ed for gear type transmissions, spiral bevelled 75W140 is a synthetic automotive gear
no other product will provide the chatter and hypoid drive axles, operating within a lubricant. JCB Optimum Performance Gear
control and brake performance in the JCB very wide oil temperature range and worm Oil 75W140 is recommended for heavy duty
manufactured powertrain that JCB Gear Oil gear final drives. It contains extreme pressure drive-line components such as rear-axles,
plus will. Its unique enhanced viscosity stability additives to give high level wear protection final drives and selected manual transmissions,
provides consistent protection throughout its under high speed, high torque and shock requiring special low temperature fluidity to
JCB STANDARD: prescribed service interval. Its unique JCB JCB STANDARD: loading conditions. JCB STANDARD: reduce fuel consumption or facilitate gear
4000/2200 formulation offers outstanding squawk and 4000/0300 4000/4800 shifting.
chatter control in oil immersed brake systems.
JCB STANDARD 4000/2200 UNIQUE TO JCB. MAN 342 Type M1, MB 235.0, ZF TE-ML 07, 08, 16C, 17B, 19B, 21A, MIL-PRF-2105-E, MB 235.8, Scania STO 1:0, ZF TE-ML 02B, ZF TE-ML 05B
FORD M2C9102-A, JOHN DEERE JDM JIIE, VOLVO 97310. ZF TE-ML 12B, MAN 3343 Typ S, MAN 341 Typ E3.
Description Pack Size Part Number Description Pack Size Part Number
JCB Gear Oil HP Plus 1 Gallon/3.7L 4000/2202U JCB Gear Oil HP 90 1 Gallon/3.7L 4000/0301U
JCB Gear Oil HP Plus 5 Gallon/18.9L 4000/2205U JCB Gear Oil HP 90 5 Gallon/18.9L 4000/0305U Description Pack Size Part Number
JCB Gear Oil HP Plus 55 Gallon/208L 4000/2203U JCB Gear Oil HP 90 55 Gallon/208L 4000/0303U JCB Gear Oil OP 75W140 5 L/1.3 Gallon 4000/4801U
BENEFITS
• Suitable for diesel and gasoline engines fitted in tractors and off-highway/
construction equipment.
• Avoids IPTO (independent power take off) clutch slippage.
• Limits wet brake noise, thus maintains brake capacity while limiting friction
plate wear.
• Provides good transmission lubrication.
• Helps prevent equipment component rust and corrosion.
• Low viscosity grade will provide quick response.
BENEFITS BENEFITS
• An excellent multi-purpose transmission fluid. • An excellent multi-purpose transmission fluid.
• Optimal friction characteristics, even at low temperatures. • Optimal friction characteristics even at low temperatures.
• Provides good wear protection under heavy duty conditions. • Provides good wear protection also under heavy duty conditions.
• Gear protection, even under shock load conditions. • Gear protection, even under shock load conditions.
• Helps maximize drive line component life. • Designed to extend drive line component life.
• Protects against rust and prevents corrosion. • Protects against rust and prevents corrosion.
• Provides good transmission lubrication. • Provides good transmission lubrication.
Description Pack Size Part Number Description Pack Size Part Number
JCB Transmission Fluid EP 10W 1 Gallon/3.7L 4000/2501U JCB Transmission Fluid EP SAE 30 1 Gallon/3.7L 4000/2601U
JCB Transmission Fluid EP 10W 5 Gallon/18.9L 4000/2505U JCB Transmission Fluid EP SAE 30 5 Gallon/18.9L 4000/2605U
JCB Transmission Fluid EP 10W 55 Gallon/208L 4000/2503U JCB Transmission Fluid EP SAE 30 55 Gallon/208L 4000/2603U
BENEFITS BENEFITS
• Designed for use in JCB Fastrac applications. • Transmission life protected.
• A fully synthetic, optimum performance fluid. • Immediate circulation in cold weather.
• Designed to provide maximum performance throughout the service • Trouble free operation with smooth gear changing.
interval. • Permits rationalization, reducing product storage and handling costs
• Guaranteed performance at extreme temperatures. and eliminates wrong ATF choice.
• Provides smooth power-steering
MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS
Audi / VW TL 52 146.00, Ford WSS-M2C204-A, MAN M 3289, ALLISON C-4, ALLISON TES 389, DEXRON III (H), MAN 339 TYPE V1,
MB 345.0, ZF TE-ML 02K, ISO 7308. MAN 339 TYPE Z1, MB 236.1, MB 236.9, VOITH 55.6335.xx,
VOLVO 97341, CAT TO-2, FORD MERCON, ZF TE-ML 02F, 04D,
03D, 09, 11B, 14A, 17C.
Description Pack Size Part Number Description Pack Size Part Number
JCB Clutch Fluid OP 6x 1L 4002/1904U JCB Universal ATF HP 5 Gallon/18.9L 4000/2305U
ANCILLARY PRODUCTS.
• Fully approved for use on JCB machines. • Manufactured to off highway standard ASTM D6210. • Manufactured to off highway standard ASTM D6210.
• Specially developed for machines fitted with oil immersed brakes. • Maximises engine performance. • Maximises engine performance.
• Superior freeze protect to -37°C/-34°F (at 50% dilution). • Superior freeze protect to -37°C /-34°F.
• Guaranteed to be compatible with your JCB radiator and cooling pack. • Guaranteed to be compatible with your JCB radiator and cooling pack.
Description Pack Size Part Number
JCB High Performance Anti-Squawk Fluid 4x 1L/1Qt 4004/3904U
MANUFACTURERS’ STANDARDS MANUFACTURERS’ STANDARDS
Description Pack Size Part Number Description Pack Size Part Number
JCB Antifreeze And Engine Coolant 1 Gallon/3.7L 4006/1101U JCB 50:50 Antifreeze And Engine Coolant 1 Gallon/3.7L 4006/1110U
JCB HYDRAULIC
ANTI-STICK ADDITIVE
JCB Anti Stick Additive is specially designed
WAXOYL
to relieve the ‘stick slip’ phenomena that can
occur with most hydraulic systems. Its friction Recommended for use on telescopic booms and extending dippers, this highly effective rustproofer is suitable
modifier properties are designed to aid the for all plant and machinery. Waxoyl expels moisture and forms a self healing skin to prevent rust formation.
flow characteristics of the hydraulic system
and help relieve the hydraulic cylinder noise
that often accompanies ‘stick slip’. It is
designed for hydraulic systems only and BENEFITS
JCB STANDARD: should NOT be used in common hydraulic,
4004/6700 brake and transmission systems. • Excellent rust killer.
JCB STANDARD: • Years of protection.
4004/0500 • Can be used to protect electrical systems from damp.
COMPREHENSIVE RANGE outperforms other grease that claim to be the same. JCB STANDARD:
COLOR:
4003/2000
BLUE
OPTIMIZES MAINTENANCE Four ball weld test: SOAP TYPE:
NLGI:
LITHIUM COMPLEX
2
SCHEDULES HELPING TO
For this industry standard test grease is put under rotating speed
DROP POINT (IP132): 473°F/245°C
and then a 450KG/992lb load is applied. To pass the test the ball
WORKING TEMPERATURE RANGE: -4°F TO 300°F/-20°C TO 150°C
REDUCE COSTS IN ALL bearings have to last for 15 seconds before they ‘fail’ (seize) and weld FOUR BALL WELD: 992LB/450KG
APPLICATIONS.
together. You can see below that the non JCB ‘equivalent’ grease
Description Pack Size Part Number
fails immediately while the JCB HP Grease continues well past JCB Special HP Grease 24x400g/14oz 4003/2017
the required time. JCB grease is manufactured to provide significant JCB Special HP Grease 12.5Kg/27.5lb 4003/2006
load protection for your JCB and other off-highway machinery. JCB Special HP Grease 18Kg/39.7lb 4003/2009
JCB Special HP Grease 50Kg/110lb 4003/2005
GREASE GUN
• Designed to suit 400gm/14oz grease cartridges.
JCB EXTREME PERFORMANCE MOLY GREASE JCB SPECIAL SLIDE GREASE JCB AUTOGREASE
JCB Extreme Performance Moly Grease is an advanced performance, JCB Special Slide Grease is formulated to provide excellent protection under JCB AUTOGREASE is for use with the JCB AUTOGREASE system, used on
multipurpose grease, recommended for heavily loaded bearing surfaces and heavy load and extreme pressure, where water and dirt are prevalent. It JCB’s large breaker range. This mineral oil based paste, containing an aluminium
in particular where limited or oscillating motion causes fretting. The addition maintains a film of lubrication on slow moving slides by combining excellent complex soap and solid lubricants, is suitable for use under water, or in high
of molybdenum disulphide provides extra protection against scoring and resistance to squeeze out with superb corrosion resistance. ambient temperatures. The specially designed cartridges screw into the
wear, making it ideal for automotive, industrial, agricultural and earthmoving AUTOGREASE system fitted to the breaker housing. The clear cartridge
equipment. allows the operator to easily monitor the grease usage from within the cab.
JCB EXTREME PERFORMANCE HAMMER GREASE JCB SPECIAL HAMMER GREASE JCB SPECIAL SLEW PINION GREASE
JCB Extreme Hammer Grease is a unique formulation aluminium complex JCB Special Hammer Grease provides a highly effective lubricant on slow JCB Special Slew Pinion Grease is a soft, black, tenacious grease designed
grease for use where extremes of pressure and temperature are likely to be moving slides, along with an excellent corrosion resistant property. It specifically for the lubrication of large and heavy-duty open gears. Excellent
encountered. Particularly suited to hammer applications where resistance to combines the “self healing” action of oils with the resistance to drip of corrosion protection and load carrying properties throughout a large
water washing and migration may be critical. viscous compounds. temperature range.
JCB ENGINE OIL 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Ultra Performance Engine Oil 5W40 API: CJ-4 - 4001/3401U 4001/3405U 4001/3403U
JCB Ultra Performance Engine Oil 15W40 API: CJ-4 - - 4001/2905U 4001/2903U
JCB Extreme Performance Engine Oil 15W40 API: CH-4 - 4001/1801U 4001/1805U 4001/1803U
JCB High Performance Engine Oil 10W30 API: CH-4 / CG-4 - - 4001/1705U -
JCB High Performance Engine Oil 20W50 API: CH-4 - - 4001/1905U 4001/1903U
JCB HYDRAULIC FLUID 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Ultra Performance Hydraulic Fluid 32 - - 4002/2805U -
JCB GEAR OIL 5 Litre / 1.3 US Gallon 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Optimum Performance Gear Oil 75W140 4000/4801U - - -
JCB TRANSMISSION FLUID 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB Optimum Performance Transmission Fluid - - 4004/6305U -
JCB ANCILLARY PRODUCTS 1 Quart / 1 Litre 1 US Gallon / 3.7 Litres 5 US Gallon / 18.9 Litres 55 US Gallon / 208 Litres
JCB High Performance Anti Squawk Fluid 4004/3904U - - -
2.5 US Gallon / 9.4 Litres 55 US Gallon / 208 Litres 330 US Gallon / 1250 Litres
JCB GREASE 14oz / 400g 17.6oz / 500g 27.5lb / 12.5Kg 39.7lb / 18Kg 110lb / 50Kg
JCB Special High Performance Grease 4003/2017 - 4003/2006 4003/2009 4003/2005