Professional Documents
Culture Documents
Caterpillar Cat 320 GC Excavator (Prefix ZBT) Service Repair Manual (ZBT00001 and Up)
Caterpillar Cat 320 GC Excavator (Prefix ZBT) Service Repair Manual (ZBT00001 and Up)
Caterpillar Cat 320 GC Excavator (Prefix ZBT) Service Repair Manual (ZBT00001 and Up)
Models
320 GC Excavator
w 1/18(W)
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320 GC EXCAVATOR ZBT
Configuration: 320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine
i07505832
Disassembly Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Table 1
Required Tools
B 8T-1757 Nut 9
9X-8268 Washer 9
C 421-5662 Lifting Eye Assembly 1
Start By:
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 2/18(W)
Illustration 1 g06345315
Remove plugs and the O-ring seals.
Illustration 2 g06344354
Remove plug and the O-ring seal. Repeat for the opposite side.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 3/18(W)
Illustration 3 g06344402
Remove plug and the O-ring seal. Repeat for the opposite side.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 4/18(W)
Illustration 4 g06344420
Illustration 5 g06344422
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 5/18(W)
Illustration 6 g06344430
Repeat for the opposite side.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 6/18(W)
Illustration 7 g06344444
Repeat for the opposite side.
Illustration 8 g06344453
Repeat for the opposite side.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 7/18(W)
Illustration 9 g06344464
Illustration 10 g06344670
Repeat for the opposite side.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 8/18(W)
Illustration 11 g06344677
Repeat for the opposite side.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 9/18(W)
Illustration 12 g06344721
Remove the nuts of Tooling (B).
Illustration 13 g06344754
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 10/18(W)
Illustration 14 g06344762
Illustration 15 g06344776
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 11/18(W)
Illustration 16 g06344788
Remove the housing from the Tooling and place on a suitable bench.
To avoid personal injury, always wear eye and face protection when
using pressurized air.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 12/18(W)
Illustration 17 g06344880
Use air pressure to unseat the brake piston.
Illustration 18 g06344925
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 13/18(W)
Illustration 19 g06344940
Illustration 20 g06344938
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 14/18(W)
Illustration 21 g06344946
Illustration 22 g06345220
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 15/18(W)
Illustration 23 g06345227
Illustration 24 g06345238
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
w 16/18(W)
Illustration 25 g06345243
Illustration 26 g06345252
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 17/18(W)
Illustration 27 g06345266
Illustration 28 g06345270
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 18/18(W)
Illustration 29 g06345278
Copyright 1993 - 2019 Caterpillar Inc. Sat Dec 14 21:35:51 UTC+0800 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14
w 1/16(W)
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320 GC EXCAVATOR ZBT
Configuration: 320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine
i06969908
Assembly Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576
Table 1
Required Tools
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14