Professional Documents
Culture Documents
Townsend Type 82 (Besmindo)
Townsend Type 82 (Besmindo)
Townsend Type 82 (Besmindo)
20
REVISED 4-01-08
TI-06
REVISED 4-01-08
TI-07
16
Note: Item 16 & 17 - INNER & OUTER ADAPTER O-RINGS IN OLD STYLE TYPE 82 PREVENTERS ONLY.
Item 53 - RAM BLOCKS, RETRACTOR SCREWS AND CARRIERS REFERENCED PAGE 35.
REVISED 4-01-08
TI-38
O.D. RAM RAM SUB RAM RAM SUB RAM RAM SUB
PIPE BLOCK ASSEMBLY BLOCK ASSEMBLY BLOCK ASSEMBLY
STANDARD
RETRACTOR 135575 135575 135575 135575 135575 135575
SCREW
H 2S
RETRACTOR 141200 141200 141200 141200 141200 141200
SCREW
NOTE: Ram Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber Screws only.
REVISED 4-01-08
TI-08
REVISED 4-01-08
TI-20
7 24 NYLON HEX NUT 20106 20106 47 2 PISTON LOCK NUT SEAL TH7135 TH7135
20 SET G-2 HEX NUT 300-703 300-705 61 1 MANIFOLD HINGE - CURVED TH7149 TH7149
NS 1 ADAPTER RING WEAR RING 152344 152344 62 8 HINGE MANIFOLD SEAL TH7150 TH7150
*** 1 ANNULAR SEAL KIT - OLD STYLE 155079 155079 63 2 HINGE PIN TH7151 TH7151
NEW STYLE - EXTRA LOWER SEAL 155079-A 155079-A
64 20 HINGE PIN SEAL TH7152 TH7152
22 1 RIGHT HAND DOOR TH7111 TH7111 65 2 HINGE PIN RETAINER TH7153 TH7153
23 1 LEFT HAND DOOR TH7112 TH7112 66 4 PIPE PLUG TH7154 TH7154
24 2 PIPE PLUGS TH7113 TH7113 67 4 GREASE FITTING TH7155 TH7155
25 2 DOOR SEAL TH7114 TH7114 68 4 BUSHING TH7156 TH7156
29 1 CYLINDER HEAD - RIGHT HAND TH7116 TH7117 71 1 CYLINDER HEAD WRENCH TH7158 TH7158
30 1 CYLINDER HEAD - LEFT HAND TH7118 TH7118 72 2 HAND WHEEL TH8111 TH8111
31 4 CYL. TO CYLINDER HEAD SEAL TH7119 TH7119 73 2 UNIVERSAL JOINT TH9982 TH9982
REVISED 4-01-08
TI-21
7 4
5
8
9
11
10
12
REVISED 4-01-08
TI-22
7 UPPER PISTON SEAL 2 63-31603 *63-31603 83-32870 103-31808 105-31403 123-30736 135-38151
10 LOWER PISTON SEAL 2 63-15614 *63-15614 83-32869 103-31604 105-32599 123-30735 135-38165
* NOTE: 7-1/16 X 5M TYPE 84 "SHORTY" ANNULAR REQUIRES SPECIFIC SEAL KIT AND PACKING UNIT.
REVISED 7-01-08
TI-23
18
5
2
14
14
13 13
16B
11 4
16B 11
12
12
15
3
10
10 15
10
8 15
16 15
9 8A 8
16A
9 9A
9A
16 16A
NOTE: Items 9A & 16A are for 6 X 3M & 6 X 5M "New
Style" Type 90 Annular BOPS and require an additional
lower piston seal and the 1" piston I.D. wear band material 1
changes to 1/2" wear band material. Item 16B is an
additional wear band added to adapter I.D. after 2005.
17
NOTE: Items 8 & 8A are specific to 13-5/8 X 3/5M annular
preventers. Item 8 is a polymeric type seal and 8A is a hard
band type seal. New 13-5/8 X 3/5M Type 90 Annular, after
7/1/08 are equipped at the factory with the hard band type seal.
REVISED 7-01-08
TI-24
7-1/16 X 3M - 7-1/16 X 5M - 9 X 3M
11 X 3M - 11 X 5M - 13-5/8 X 5M
TOWNSEND TYPE 90 ANNULAR BOPS ARE
AVAILABLE WITH STANDARD PACKING UNITS OR
THE PATENTED ANUFLEX STYLE UNIT.
THE ANUFLEX INSERT HINGES AS THE RUBBER IS
CLOSED AND OPENED. ANUFLEX PACKING UNITS
HAVE A LONGER LIFE CYCLE.
REVISED 7-01-08
TI-25
SHAFFER SENTINEL I & II & WSI are registered trademarks of their respective companies. Townsend International BOP is not affiliated with these companies.
REVISED 4-01-08
TI-26
REVISED 4-01-08
TI-27
REVISED 4-01-08
TI-28
REDA-CABLE SLOT
"FLAT OR ROUND"
RAM ASSEMBLY REDA-CABLE SIZE RAM BLOCK FACE SEAL TOP SEAL
2 1.90" 2 1.25"
4 1.625" 4 1.125"
FLAT 6 1.50" 6 1.00" ROUND
REDA-CABLE REDA-CABLE
REVISED 6-23-08
TI-29
7-1/16" X 3M HYDRAULIC
RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL
SHAFFER is a registered trademark. Townsend International BOP is not affiliated with thIs company.
REVISED 4-01-08
TI-30
9" X 3M HYDRAULIC
RAM ASSEMBLY SIZE RAM BLOCK FACE SEAL TOP SEAL
REVISED 4-01-08
TI-31
NOTICE: TOWNSEND is not affiliated with Shaffer. Shaffer and Chasavoy are registered trademarks of Shaffer.
REVISED 4-01-08
TI-32
O.D. 8” x 3M 13-5/8” x 3M
6” x 3M 10” x 3M 10” x 5M
PIPE 8” x 5M 13-5/8" x 5M
Type 39 Type 39 Type 48
INCHES Type 39 Type 480
RETAINER SCREW
Fits All 192034 192034 192034 192034 192034
Pipe Sizes
BOP A, B, E, A, B, E, A, B, E, A, B, E, A, B, E,
TYPE 39 39 LWS, 39 LWS, 39 LWS
SHAFFER is a registered trademark of The Shaffer Co.
REVISED 4-01-08
TI-33
O.D. RAM RAM BLOCK RAM RAM BLOCK RAM RAM BLOCK
PIPE SIZE BLOCK SUB ASSEMBLY BLOCK SUB ASSEMBLY BLOCK SUB ASSEMBLY
NOTE: Block Sub Assembly consists of Ram Block, Ram Rubber, and Ram Rubber to Block Screws only.
REVISED 4-01-08
TI-34
2-1/16” 142644
2-3/8” 135858 •
2-7/8” 135859 •
NOTE: Two Retainer Screws, Part #135545 are
3-1/2” 135860 • included with each Ram Rubber.
4” 135861
4-1/2” 135862 •
• NOTE: Standard pipe sizes that are
5” 142725 available at most stocking locations.
Other sizes stocked at TOWNSEND
5-1/2” 116116 main warehouse locations.
Retainer
135545 •
Screw
REVISED 4-01-08
TI-35
H2S Trim
141202 141202
Retractor Screw
REVISED 4-01-08