Tender No 129 - 2020 - 21 - Se - Q

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 21

Validate Print Help Percentage BoQ

Tender Inviting Authority: Superintending Engineer, P H Circle, Kerala Water Authority, Kollam.

Work Name:Jal Jeevan Mission-2020-22 ARWSS to Pathanapuram and Piravanthoor-Providing Water Supply House Service Connections in
existing distribution lines,Supply of V/T pumpset and Chlorine cylinder in Piravanthoor Grama Panchayath

Re- Tender No: 129/2020-21/SE/Q

Name
of the
Bidder/
Bidding
Firm /
Compa
ny :

PRICE SCHEDULE
(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the
bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBE TEXT # NUMBER TEXT # NUMBER NUMBER # TEXT #


RSl.# Item Description #
Quantity Units Estimated TOTAL AMOUNT TOTAL AMOUNT
No. Rate Without GST In Words
in in
Rs. P Rs. P

1 2 4 5 6 53 55
1
Appendix A-Providing Water Supply House Service
Connections in existing distribution lines
1.001 Providing 15mm (1/2 inch) house connection with 4926.000 Nos 4894.99 24112720.74 INR Two Crore Forty One Lakh
15mm (1/2 inch) water meter from existing PVC / Twelve Thousand Seven Hundred
HDPE mains up to 110 mm dia., up to a length of & Twenty and Paise Seventy Four
5 m using 20mm Indian Standard Class 6 uPVC Only
pipe and uPVC / GM / Brass specials viz. brass
ferrule, GM full way wheel valve, Elbow, MTA,
FTA, couplers, PVC Service Saddle of suitable
size etc. and connecting with the mains, testing
the joints etc. complete including trenching and
refilling in all kinds of soil up to a depth of 1.50m
for main line tracing and trench of average cross
section 0.3m x 0.75m for laying connection pipe
and service pipe, fixing water meter, lighting,
watching, providing caution boards, traffic control
etc. complete including cost of materials, hire for
tools, cost of consumables and labour charges,
including the cost of tested Class B Multijet water
meter with ISI mark and weather resistant PP / PE
meter box of minimum size 300mm x 200mm x
150mm, but excluding charges for cutting the
concrete / tarred / bituminous roads etc, and as
per the direction of the departmental officers.
1.002 Providing 15mm (1/2 inch) house connection with 1500.000 Nos 5094.99 7642485.00 INR Seventy Six Lakh Forty Two
15mm (1/2 inch) water meter from existing PVC / Thousand Four Hundred & Eighty
HDPE mains from 140mm to 200mm dia., up to a Five Only
length of 5 m using 20mm Indian Standard Class 6
uPVC pipe and uPVC / GM / Brass specials viz.
brass ferrule, GM full way wheel valve, Elbow,
MTA, FTA, couplers, PVC Service Saddle of
suitable size etc. and connecting with the mains,
testing the joints etc. complete including trenching
and refilling in all kinds of soil up to a depth of
1.50m for main line tracing and trench of average
cross section 0.3m x 0.75m for laying connection
pipe and service pipe, fixing water meter, lighting,
watching, providing caution boards, traffic control
etc. complete including cost of materials, hire for
tools, cost of consumables and labour charges,
including the cost of tested Class B Multijet water
meter with ISI mark and weather resistant PP / PE
meter box of minimum size 300mm x 200mm x
150mm, but excluding charges for cutting the
concrete / tarred / bituminous roads etc, and as
per the direction of the departmental officers.
1.003 Providing 15mm (1/2 inch) house connection with 200.000 Nos 5007.89 1001578.00 INR Ten Lakh One Thousand Five
15mm (1/2 inch) water meter from existing AC / Hundred & Seventy Eight Only
GI mains up to 125 mm dia., up to a length of 5 m
using 20mm Indian Standard Class 6 uPVC pipe
and uPVC / GM / Brass specials viz. brass ferrule,
GM full way wheel valve, Elbow, MTA, FTA,
couplers, GI / MS / SS Service Saddle of suitable
size etc. and connecting with the mains, testing
the joints etc. complete including trenching and
refilling in all kinds of soil up to a depth of 1.50m
for main line tracing and trench of average cross
section 0.3m x 0.75m for laying connection pipe
and service pipe, fixing water meter, lighting,
watching, providing caution boards, traffic control
etc. complete including cost of materials, hire for
tools, cost of consumables and labour charges,
including the cost of tested Class B Multijet water
meter with ISI mark and weather resistant PP / PE
meter box of minimum size 300mm x 200mm x
150mm, but excluding charges for cutting the
concrete / tarred / bituminous roads etc, and as
per the direction of the departmental officers.
1.004 Providing additional length of house connection 59510.000 metre 128.83 7666673.30 INR Seventy Six Lakh Sixty Six
pipe using 20mm Indian Standard Class 6 uPVC Thousand Six Hundred & Seventy
pipe and specials and testing the joints etc., by Three and Paise Thirty Only
trenching and refilling in all kinds of soil with trench
of average cross section 0.3m x 0.75m for laying
of connection pipe and service pipe, lighting,
watching, providing caution boards, traffic control
etc., including cost of materials, hire for tools, cost
of consumables and labour charges etc. complete,
but excluding the cost of cutting of concrete /
tarred / bituminous roads etc., and as per the
directions of the department officers.

1.005 Providing and fixing G.I. pipes complete with G.I 1000.000 metre 227.24 227240.00 INR Two Lakh Twenty Seven
fittings including trenching and refilling etc. Thousand Two Hundred & Forty
External work15 mm dia nominal bore Only
1.006 Providing and fixing G.I. pipes complete with G.I 500.000 metre 264.27 132135.00 INR One Lakh Thirty Two
fittings including trenching and refilling etc. Thousand One Hundred & Thirty
External work20 mm dia nominal bore Five Only
1.007 Providing 20mm (1/2 inch) PVC Air Valve in the 1625.000 Nos 341.76 555360.00 INR Five Lakh Fifty Five Thousand
water meter assembly for 15mm connection, using Three Hundred & Sixty Only
20mm Indian Standard Class 6 uPVC pipes and
specials including cost of materials, consumables,
hire for tools and labour charges etc. complete and
as per the directions of the department officers.

1.008 Providing 15mm PVC Tap in the water meter 6626.000 Nos 429.31 2844608.06 INR Twenty Eight Lakh Forty Four
assembly for 15mm connection, using 20mm Thousand Six Hundred & Eight and
Indian Standard Class 6 uPVC pipes and specials Paise Six Only
including cost of materials, consumables, hire
charges for tools and labour charges etc. complete
and as per the direction of departmental officers.
1.009 Providing Geotagging for FHTC 6626.000 No 20.00 132520.00 INR One Lakh Thirty Two
Thousand Five Hundred & Twenty
Only
1.01 Charges for jointing with the suitable mechanical 1.000 No 7114.18 7114.18 INR Seven Thousand One
joint in 350 mm DI Pipe (cutting, removing and Hundred & Fourteen and Paise
laying<br>back a length of 1.0m from one side of Eighteen Only
the joint) including earth work excavation in all
kinds of soil for<br>exposing leak portion of the
pipe including tar cutting / concrete cutting, by
cutting and removing a portion<br>of pipe from the
damaged joint without causing any damages to the
remaining portion of the line and<br>specials and
replacing the pipe with mechanical and tyton joint
after cleaning the ends, centering the<br>pipe,
providing the joints, testing the line to the required
test pressure, rectifying any defects noticed
and<br>refilling the trenches using excavated
earth in layers not exceeding 20cm depth
including consolidating<br>each layers by
ramming, watering, removing the surplus soil from
the work site, without causing any<br>damages to
any other utilities, including the charges of hire and
conveyance of tools, plants and materials<br>to
the leak site, bailing out water, lighting, watching,
ribbon fencing, caution boards, traffic diversion
but<br>excluding cost of mechanical joint and as
per the direction of departmental officers etc.
complete.
1.011 Supply and erection of of 350 mm Mechanical 1.000 No 239209.53 239209.53 INR Two Lakh Thirty Nine
flow meter of Woltman type confirming to Thousand Two Hundred & Nine
protection level of ISO 4064 class B of ARAD / and Paise Fifty Three Only
ZENEER/ REYCHEM RPG / ITRON make and the
flow meter shall be tested and certified by FCRI-
Palakkad The manufactures should have the
calibration standards and the product shall have
sufficient warranty provisions..including cost of
specials,excavation and fitting charges

Appendix B-Pipe line extension with house service connections in all wards for providing FHTC
2.001 Demolishing cement concrete manually / by 1614.000 cum 1414.32 2282712.48 INR Twenty Two Lakh Eighty Two
mechanical means including disposal of material Thousand Seven Hundred &
within 50 metres lead as per direction of Engineer - Twelve and Paise Forty Eight Only
in-Charge.Nominal concrete 1:3:6 or richer mix (i/c
equivalent design mix)
2.002 Cutting the bituminous / concrete roads with 1000.000 meter 32.34 32340.00 INR Thirty Two Thousand Three
cutting machine for a minimum depth of 200mm Hundred & Forty Only
along the sides of proposed alignment of the pipe
to be laid without causing any damage to other
utilities, including the charges for hire and
conveyance of tools and plant, cost of
consumables and charges for lighting, watching,
ribbon fencing, caution boards, traffice diversion,
and as per the direction of departmental officers
etc. complete, before carrying out the demolition of
bituminous / concrete road by mechanical means
and carrying out the excavation.
2.003 Excavating trenches of required width for pipes, 10163.600 cum 414.43 4212100.75 INR Forty Two Lakh Twelve
cables, etc including excavation for sockets, and Thousand One Hundred and
dressing of sides, ramming of bottoms, depth up to Paise Seventy Five Only
1.5 m, including getting out the excavated soil, and
then returning the soil as required, in layers not
exceeding 20 cm in depth, including
consolidatingeach deposited layer by ramming,
watering, etc. and disposing of surplus excavated
soil as directed, within a lead of 50 m :All kinds of
soil (Ref. Item No. 2.10.1 of DSR)

2.004 Excavating trenches of required width for pipes, 2944.403 cum 583.92 1719295.80 INR Seventeen Lakh Nineteen
cables, etc including excavation for sockets, and Thousand Two Hundred & Ninety
dressing of sides, ramming of bottoms, depth up to Five and Paise Eighty Only
1.5 m, including getting out the excavated soil, and
then returning the soil as required, in layers not
exceeding 20 cm in depth, including
consolidatingeach deposited layer by ramming,
watering, etc. and disposing of surplus excavated
soil as directed, within a lead of 50 m :"Ordinary
Rock. (Ref. Item No. 2.13.1 of DSR)

2.005 Fencing one side of trenches, 1.50 m height with 8500.000 metre 22.48 191080.00 INR One Lakh Ninety One
two rows of 10 cm plastic caution tape in vertical Thousand &Eighty Only
casuarina pole (girth 15cm to 24cm) fixed at 2 m
intervals. (Data Prepared based on PWD SDB -
Item No.1009)
2.006 Laying UPVC pipes of class 2 to class 6 and 8900.000 metre 32.84 292276.00 INR Two Lakh Ninety Two
specials, lowering to the trenches already made, Thousand Two Hundred & Seventy
placing in position aligning the pipe line to the lines Six Only
and levels and jointing the pipes and specials with
solvent cement and testing the pipe line with water
to the required test pressure (excluding cost of
pipes and specials) 50 mm nominal outer dia
pipes.
2.007 Laying UPVC pipes of class 2 to class 6 and 7700.000 metre 60.07 462539.00 INR Four Lakh Sixty Two
specials, lowering to the trenches already made, Thousand Five Hundred & Thirty
placing in position aligning the pipe line to the lines Nine Only
and levels and jointing the pipes and specials with
solvent cement and testing the pipe line with water
to the required test pressure (excluding cost of
pipes and specials).63 mm nominal outer dia
pipes.
2.008 Laying UPVC pipes of class 2 to class 6 and 5500.000 metre 60.07 330385.00 INR Three Lakh Thirty Thousand
specials, lowering to the trenches already made, Three Hundred & Eighty Five Only
placing in position aligning the pipe line to the lines
and levels and jointing the pipes and specials with
solvent cement and testing the pipe line with water
to the required test pressure (excluding cost of
pipes and specials).75 mm nominal outer dia
pipes.
2.009 Laying UPVC pipes of class 2 to class 6 and 5100.000 metre 60.07 306357.00 INR Three Lakh Six Thousand
specials, lowering to the trenches already made, Three Hundred & Fifty Seven Only
placing in position aligning the pipe line to the lines
and levels and jointing the pipes and specials with
solvent cement and testing the pipe line with water
to the required test pressure (excluding cost of
pipes and specials). 90 mm nominal outer dia
pipes."
2.01 Laying UPVC pipes of class 2 to class 6 and 1600.000 metre 88.51 141616.00 INR One Lakh Forty One
specials, lowering to the trenches already made, Thousand Six Hundred & Sixteen
placing in position aligning the pipe line to the lines Only
and levels and jointing the pipes and specials with
solvent cement and testing the pipe line with water
to the required test pressure (excluding cost of
pipes and specials).110 mm nominal outer dia
pipes.
2.011 Laying UPVC pipes of class 2 to class 6 and 100.000 metre 116.11 11611.00 INR Eleven Thousand Six Hundred
specials, lowering to the trenches already made, & Eleven Only
placing in position aligning the pipe line to the lines
and levels and jointing the pipes and specials with
solvent cement and testing the pipe line with water
to the required test pressure (excluding cost of
pipes and specials). 140 mm nominal outer dia
pipes.
2.012 Providing and fixing G.I. pipes complete with G.I 1250.000 metre 427.04 533800.00 INR Five Lakh Thirty Three
fittings including trenching and refilling etc. Thousand Eight Hundred Only
External work40 mm dia nominal bore
2.013 Providing and fixing G.I. pipes complete with G.I 1250.000 metre 486.12 607650.00 INR Six Lakh Seven Thousand Six
fittings including trenching and refilling etc. Hundred & Fifty Only
External work50 mm dia nominal bore
2.014 Providing and fixing G.I. pipes complete with G.I 750.000 metre 640.74 480555.00 INR Four Lakh Eighty Thousand
fittings including trenching and refilling etc. Five Hundred & Fifty Five Only
External work65 mm dia nominal bore
2.015 Providing and fixing G.I. pipes complete with G.I 750.000 metre 817.55 613162.50 INR Six Lakh Thirteen Thousand
fittings including trenching and refilling etc. One Hundred & Sixty Two and
External work80 mm dia nominal bore Paise Fifty Only
2.016 Conveying and fixing G.I. pipes complete with G.I. 100.000 metre 164.12 16412.00 INR Sixteen Thousand Four
fittings including trenching and refilling etc. but Hundred & Twelve Only
excluding cost of pipes and fittings - External work.
100 mm dia nominal bore Observed Data derived
from item no.18.12 of DAR

2.017 Interconnection of existing line of size 175.000 No 1413.81 247416.75 INR Two Lakh Forty Seven
110/90/75/63/50mm PVC with new pipe line using Thousand Four Hundred & Sixteen
equal Tee including charges of earth work and and Paise Seventy Five Only
refilling ,all labour charges, material cost, hire
charges etc. complete.
2.018 Providing and laying in position cement concrete 1595.250 cum 6352.26 10133442.77 INR One Crore One Lakh Thirty
of specified grade excluding the cost of centering Three Thousand Four Hundred &
and shuttering - All work up to plinth level:1:4:8 (1 Forty Two and Paise Seventy
cement : 4 coarse sand : 8 graded stone Seven Only
aggregate 40 nominal size)
2.019 Supply ,stacking,spreading and consolidating of 75.000 m3 528.18 39613.50 INR Thirty Nine Thousand Six
Quarry Muck in the trench of pipe line, including Hundred & Thirteen and Paise Fifty
carriage, loading ,unloading & stacking up to any Only
lead.
2.02 Providing and fixing gun metal gate valve with C.I. 20.000 No 1063.73 21274.60 INR Twenty One Thousand Two
wheel of approved quality (screwed end) :50 mm Hundred & Seventy Four and Paise
nominal bore Sixty Only
2.021 Providing and fixing gun metal gate valve with C.I. 20.000 No 1825.33 36506.60 INR Thirty Six Thousand Five
wheel of approved quality (screwed end) :65 mm Hundred & Six and Paise Sixty
nominal bore Only
2.022 Conveying and fixing C I Single acting Air Valve 20.000 Nos 127.11 2542.20 INR Two Thousand Five Hundred
of approved quality with bolts,nuts,rubber & Forty Two and Paise Twenty
insertions etc . excluding the cost of air valve(the Only
tail pieces if required will be paid seperately): 25
mm Single acting Air Valve Observed Data
derived from item no.18.59.of DAR

2.023 "Conveying and fixing C.I. sluice valves (with cap) 20.000 Nos 473.02 9460.40 INR Nine Thousand Four Hundred
by providing complete with bolts, nuts, rubber & Sixty and Paise Forty Only
insertions etc. excluding the cost of valve (the tail
pieces if required will be paid separately) :80 mm
diameter. Class I"Observed Data derived from
item no.18.31.of DAR
3 Appendix C- Cost of materials
3.001 Supply of PVC Pipes and specials, 6kg/cm2, 8900.000 metre 48.00 427200.00 INR Four Lakh Twenty Seven
50mm Dia. Thousand Two Hundred Only
3.002 Supply of PVC Pipes and specials 6kg/cm2, 7700.000 metre 73.020 562254.00 INR Five Lakh Sixty Two Thousand
63mm Dia. Two Hundred & Fifty Four Only

3.003 Supply of PVC Pipes and specials 6kg/cm2, 5500.000 metre 105.30 579150.00 INR Five Lakh Seventy Nine
75mm Dia. Thousand One Hundred & Fifty
Only
3.004 Supply of PVC Pipes and specials 6kg/cm2, 5100.000 metre 151.40 772140.00 INR Seven Lakh Seventy Two
90mm Dia. Thousand One Hundred & Forty
Only
3.005 Supply of PVC Pipes and specials 6kg/cm2, 1600.000 metre 213.504 341606.40 INR Three Lakh Forty One
110mm Dia. Thousand Six Hundred & Six and
Paise Forty Only
3.006 Supply of PVC Pipes and specials 6kg/cm2, 100.000 metre 358.00 35800.00 INR Thirty Five Thousand Eight
140mm Dia. Hundred Only

3.007 Supply of 100 mm GI Pipes and specials 100.000 metre 166.00 16600.00 INR Sixteen Thousand Six
Hundred Only

3.008 Supply of CI Air Valve, Conforming to IS 14848 - 20.000 No 966.75 19335.00 INR Nineteen Thousand Three
2000, Single Orifice, Small Orifice Type S1, Size Hundred & Thirty Five Only
25mm.
3.009 Supply of CI Plain End Valve Conforming to IS 20.000 No 3240.70 64814.00 INR Sixty Four Thousand Eight
14846 - 2000, Sluice Valve with Cap PN 1.6, Size Hundred & Fourteen Only
80mm.
4
Appendix D- Supplying,erection, testing and
commissioning of a VT pump set with all required
accessories having discharge of 76.38 l/s and head
of 132 m
4.001 Design ,Supply and errection getting approval 1.000 No 2979731.65 2979731.65 INR Twenty Nine Lakh Seventy
,testing and commissioning of reputed make VT Nine Thousand Seven Hundred &
pumpset with motors including providing all allied Thirty One and Paise Sixty Five
electrical connections and all accessories Only
including necessary valves in pumphouse having
a discharge of 76.38 l/s and head of 132 m

4.002 Supply and fitting new 100Ams Control Panel 1.000 No 62000.00 62000.00 INR Sixty Two Thousand Only
board in blower unit, in Kuriottumala pump house (
using the materials of L&T )
4.003 Supply and fitting new 400 Amps disconecter fuse 1.000 No 42000.00 42000.00 INR Forty Two Thousand Only
switch in Kuriottumala Raw
water pump house
4.004 Supply and fitting of New 200Ams control panel 1.000 No 103000.00 103000.00 INR One Lakh Three Thousand
board water treatment plant at Kuriottumala Only

4.005 Supply and fitting new 5 HP Back Wash Pump 2.000 No 125000.00 250000.00 INR Two Lakh Fifty Thousand
set with accessories & erection work completed Only
and trial run etc in Kuriottumala Raw water pump
house <br>
4.006 Supply and fitting New 63amps panel board in 1.000 No 32000.00 32000.00 INR Thirty Two Thousand Only
Back wash unit at WTP Kuriottumala
4.007 Charges for dismantling the assembly of the 4.000 No 5496.23 21984.92 INR Twenty One Thousand Nine
central agitator motor, conveying the motors to Hundred & Eighty Four and Paise
work shop from treatment plant, dismantling the Ninety Two Only
damaged bearings ,cleaning the stator, heating &
varnishing the winding portion using heater
,testing the megar reading of the winding ,
cleaning the motor parts, fitting the new bearings (
if necessary ) ,assembling the motor, conveying to
the plant, fixing the motors to foundation, providing
the electric connections etc complete.
<br>(Including cost of varnish, bearings, lath
workshop, conveying and loading & unloading
charges)<br><br>
4.008 Overhauling the central agitator gear boxes 4.000 No 7892.18 31568.72 INR Thirty One Thousand Five
,removing the gear boxes from the foundation, Hundred & Sixty Eight and Paise
conveying to the work shop, disassembling the Seventy Two Only
gear boxes, removing the damaged bearings
,cleaning the gear system machine, facing &
polishing ( if necessary) and fitting new bearings
,assembling the gear boxes, conveying to the plant
fitting back on foundation in correct alignment
<br>( including cost of bearings, bearing oil, oil
seal, conveyance charges, workshop charge,
labour charges etc )<br>
4.009 Charges for overhauling the motor of 20 HP air 2.000 No 16949.35 33898.70 INR Thirty Three Thousand Eight
blower, including dismantling the motor in to parts, Hundred & Ninety Eight and Paise
separating the rotor and stator , conveying the Seventy Only
rotor to the work shop, dismantling the front and
back bearings ( No: 6309) replacing it with new
one if necessary replacing rubber seal, super
finishing motor shaft, varnishing and heating the
stator and rotor windings, assembling the motor,
fitting the motor back in to position testing, trial
running, conveyance charge etc<br> (Including
cost of varnish, workshop, conveying and loading
& unloading charges)<br>

4.01 Charges for overhauling the blower unit including 2.000 No 12785.38 25570.76 INR Twenty Five Thousand Five
conveying it in to work shop removing the cover of Hundred & Seventy and Paise
the blower, dissembling the blower in to parts Seventy Six Only
such as gears, impellers etc replacing damaged
bushes, bearing, water seals if necessary, super
finishing/ machining the shaft, replacing oil seal
etc
4.011 Supply and fitting new Brass safety valve 2.000 set 15389.88 30779.76 INR Thirty Thousand Seven
Hundred & Seventy Nine and
Paise Seventy Six Only
4.012 Supply and fitting pressure gauge 2.000 No 2003.59 4007.18 INR Four Thousand &Seven and
Paise Eighteen Only

4.013 Supply and fitting new 1 HP Alum mix motor on 2.000 No 11872.86 23745.72 INR Twenty Three Thousand
the foundation at correct alignment ,providing Seven Hundred & Forty Five and
electric connections of the motor etc complete, Paise Seventy Two Only
<br>(Including cost of motor, conveying charge
and labour charge etc)<br>
4.014 Supply and fitting new Alum mix gear box on 2.000 No 21154.18 42308.36 INR Forty Two Thousand Three
foundation at correct alignment ,filling the gear iol Hundred & Eight and Paise Thirty
and greasing etc ( Including cost of gear box, gear Six Only
oil and greasing )
4.015 Supply and fitting new V belt pulley, boaring of 2.000 No 5226.75 10453.50 INR Ten Thousand Four Hundred
pulley by using lathe machine etc ( Including cost & Fifty Three and Paise Fifty Only
of pulley ,lathe charge , V belt and labour charge
)<br>
4.016 Supply and fitting new 1 HP Lime mix motor on 2.000 No 11872.86 23745.72 INR Twenty Three Thousand
the foundation at correct alignment ,providing Seven Hundred & Forty Five and
electric connections of the motor etc complete, Paise Seventy Two Only
<br>(Including cost of motor, conveying charge
and labour charge etc)<br>
4.017 Supply and fitting new Lime mix gear box on 2.000 No 21154.18 42308.36 INR Forty Two Thousand Three
foundation at correct alignment ,filling the gear iol Hundred & Eight and Paise Thirty
and greasing etc ( Including cost of gear box, gear Six Only
oil and greasing )
4.018 Supply and fitting new V belt pulley, boaring of 2.000 No 5226.75 10453.50 INR Ten Thousand Four Hundred
pulley by using lathe machine etc ( Including cost & Fifty Three and Paise Fifty Only
of pulley ,lathe charge , V belt and labour charge

4.019 Supply and fitting of New Soft starter suitable for 1.000 No 405000.00 405000.00 INR Four Lakh Five Thousand
200 HP VT Pump set (starting current is 468 Only
Amps) in Raw Water Pump house at
Kuriottumala
5 Appendix E-Supply and deliver Chlorine Cylinder
compatible with the existing Chlorination system at
WTP Kuryottumala under WS section
Pathanapuram
5.001 Supply of 100Kg Chlorine Cylinder ,Transportation 6.000 No 48000.01 288000.06 INR Two Lakh Eighty Eight
, loading ,unloading in TCC testing ,painting and Thousand and Paise Six Only
filling the chlorine cylinder ,Transportation ,loading
unloading from TCC to water treatment plant

6 Appendix F-Construction of valve chamber


6.001 Earth work in excavation by mechanical means 55.772 cum 178.66 9964.23 INR Nine Thousand Nine Hundred
(Hydraulic excavator)/manual means over areas & Sixty Four and Paise Twenty
(exceeding 30 cm in depth, 1.5 m in width as well Three Only
as 10 sqm on plan) including disposal of
excavated earth, lead up to 50 m and lift up to 1.5
m, disposed earth to be levelled and neatly
dressed.All kinds of soil
6.002 Providing and laying in position cement concrete 5.072 cum 6352.26 32218.66 INR Thirty Two Thousand Two
of specified grade excluding the cost of centering Hundred & Eighteen and Paise
and shuttering - All work up to plinth level:1:4:8 (1 Sixty Six Only
cement : 4 coarse sand : 8 graded stone
aggregate 40 nominal size)
6.003 Providing and laying in position specified grade of 26.702 cum 8188.50 218649.33 INR Two Lakh Eighteen Thousand
reinforced cement concrete, excluding the cost of Six Hundred & Forty Nine and
centering, shuttering, finishing and reinforcement - Paise Thirty Three Only
All work up to plinth level:1:2:4 ( 1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm
nominal size)
6.004 Centering and shuttering including strutting, etc. 127.200 sqm 275.12 34995.26 INR Thirty Four Thousand Nine
and removal of form for:Foundations, footings, Hundred & Ninety Five and Paise
bases of columns, etc for mass concrete Twenty Six Only
6.005 Steel reinforcement for R.C.C work including 2136.161 kilogram 80.29 171512.37 INR One Lakh Seventy One
straightening, cutting, bending, placing in position Thousand Five Hundred & Twelve
and binding all complete upto plinth levelThermo - and Paise Thirty Seven Only
Mechanically Treated bars of grade Fe-500D or
more
6.006 12 mm cement plaster of mix: 126.000 sqm 227.46 28659.96 INR Twenty Eight Thousand Six
Hundred & Fifty Nine and Paise
Ninety Six Only
6.007 560mm dia CI MH cover with frame (heavy duty) 30.000 No 15243.49 457304.70 INR Four Lakh Fifty Seven
including conveying and fixing all as per the Thousand Three Hundred & Four
direction of Engineer in charge. and Paise Seventy Only
7
Appendix G-Replacing damaged 63 mm PVC pipe
with 75mm PVC pipe. Vettithitta Cheevode Road
7.001 Cutting the bituminous / concrete roads with 2000.000 metre 32.34 64680.00 INR Sixty Four Thousand Six
cutting machine for a minimum depth of 200mm Hundred & Eighty Only
along the sides of proposed alignment of the pipe
to be laid without causing any damage to other
utilities, including the charges for hire and
conveyance of tools and plant, cost of
consumables and charges for lighting, watching,
ribbon fencing, caution boards, traffice diversion,
and as per the direction of departmental officers
etc. complete, before carrying out the demolition of
bituminous / concrete road by mechanical means
and carrying out the excavation.

7.002 Dismantling of flexible pavement ( bituminous 75.000 cum 290.08 21756.00 INR Twenty One Thousand Seven
courses ) by mechanical means and disposal of Hundred & Fifty Six Only
dismantled material up to a lead of 1 kilo metre, as
per direction of Engineer-in-charge.
7.003 Excavating trenches of required width for pipes, 725.000 cum 414.43 300461.75 INR Three Lakh Four Hundred &
cables, etc including excavation for sockets, and Sixty One and Paise Seventy Five
dressing of sides, ramming of bottoms, depth up to Only
1.5 m, including getting out the excavated soil, and
then returning the soil as required, in layers not
exceeding 20 cm in depth, including
consolidatingeach deposited layer by ramming,
watering, etc. and disposing of surplus excavated
soil as directed, within a lead of 50 m :All kinds of
soil (Ref. Item No. 2.10.1 of DSR)
7.004 Excavating trenches of required width for pipes, 200.000 cum 583.92 116784.00 INR One Lakh Sixteen Thousand
cables, etc including excavation for sockets, and Seven Hundred & Eighty Four Only
dressing of sides, ramming of bottoms, depth up to
1.5 m, including getting out the excavated soil, and
then returning the soil as required, in layers not
exceeding 20 cm in depth, including
consolidatingeach deposited layer by ramming,
watering, etc. and disposing of surplus excavated
soil as directed, within a lead of 50 m :"Ordinary
Rock. (Ref. Item No. 2.13.1 of DSR)

7.005 Laying UPVC pipes of class 2 to class 6 and 2000.000 metre 60.07 120140.00 INR One Lakh Twenty Thousand
specials, lowering to the trenches already made, One Hundred & Forty Only
placing in position aligning the pipe line to the lines
and levels and jointing the pipes and specials with
solvent cement and testing the pipe line with water
to the required test pressure (excluding cost of
pipes and specials).75 mm nominal outer dia
pipes.
7.006 Providing and laying in position cement concrete 77.160 cum 6352.26 490140.38 INR Four Lakh Ninety Thousand
of specified grade excluding the cost of centering One Hundred & Forty and Paise
and shuttering - All work up to plinth level:1:4:8 (1 Thirty Eight Only
cement : 4 coarse sand : 8 graded stone
aggregate 40 nominal size)
7.007 Interconnection of existing line of size 5.000 No 1413.81 7069.05 INR Seven Thousand &Sixty Nine
110/90/75/63/50mm PVC with new pipe line using and Paise Five Only
equal Tee including charges of earth work and
refilling ,all labour charges, material cost, hire
charges etc. complete.
7.008 Shifting the existing dismantled water supply 100.000 No 1571.42 157142.00 INR One Lakh Fifty Seven
service connections/ tap connections from old line Thousand One Hundred & Forty
to the new line by supplying and providing saddle Two Only
piece of adequate size, 20 mm valve, 20 mm
coupling, 20 mm CPVC pipes, 20 mm elbows and
all other specials needed and connecting to the
existing consumer aetc complete

7.009 Supplying and fitting 75 mm PVC ball valve good 1.000 No 2384.80 2384.80 INR Two Thousand Three Hundred
quality including cost of materials and labour & Eighty Four and Paise Eighty
charges etc complete Only
7.01 Conveying and fixing C.I. sluice valves (with cap) 2.000 Nos 992.73 1985.46 INR One Thousand Nine Hundred
by providing complete with bolts, nuts, rubber & Eighty Five and Paise Forty Six
insertions etc. excluding the cost of valve (the tail Only
pieces if required will be paid separately) :150 mm
diameter. Class I"Data derived from item
no.18.31.3.1 of DAR
7.011 Conveying and fixing C I Single acting Air Valve 4.000 Nos 127.11 508.44 INR Five Hundred & Eight and
of approved quality with bolts,nuts,rubber Paise Forty Four Only
insertions etc . excluding the cost of air valve(the
tail pieces if required will be paid seperately): 25
mm Single acting Air Valve Observed Data
derived from item no.18.59.of DAR

7.012 Supply of PVC Pipe, 8kg/cm2, 75mm Dia. 2000.000 metre 165.21 330420.00 INR Three Lakh Thirty Thousand
Four Hundred & Twenty Only

7.013 Supply of CI Plain End Valve Conforming to IS 2.000 No 6734.30 13468.60 INR Thirteen Thousand Four
14846 - 2000, Sluice Valve with Cap PN 1.6, Size Hundred & Sixty Eight and Paise
150mm. Sixty Only
7.014 Supply of CI Air Valve, Conforming to IS 14848 - 4.000 No 966.75 3867.00 INR Three Thousand Eight
2000, Single Orifice, Small Orifice Type S1, Size Hundred & Sixty Seven Only
25mm.
Total in Figures 77151361.46 INR Seven Crore Seventy One
Lakh Fifty One Thousand Three
Hundred & Sixty One and Paise
Forty Six Only
Quoted Rate in Figures 0.00 INR Zero Only

Select

Quoted Rate in Words INR Zero Only

You might also like