This document contains the results of a chemical analysis of water and leachate samples from various locations. The analysis measured pH, electrical conductivity, salinity, turbidity, total suspended solids, total dissolved solids, chemical oxygen demand, bicarbonates, and concentrations of various cations and anions. The samples generally had neutral pH levels between 6 and 7. Concentrations of ions like sodium, potassium, calcium, magnesium, chloride, and nitrates varied across sample locations. The analysis was conducted using a spectrophotometer and atomic absorption spectrometer with an air-acetylene flame.
This document contains the results of a chemical analysis of water and leachate samples from various locations. The analysis measured pH, electrical conductivity, salinity, turbidity, total suspended solids, total dissolved solids, chemical oxygen demand, bicarbonates, and concentrations of various cations and anions. The samples generally had neutral pH levels between 6 and 7. Concentrations of ions like sodium, potassium, calcium, magnesium, chloride, and nitrates varied across sample locations. The analysis was conducted using a spectrophotometer and atomic absorption spectrometer with an air-acetylene flame.
This document contains the results of a chemical analysis of water and leachate samples from various locations. The analysis measured pH, electrical conductivity, salinity, turbidity, total suspended solids, total dissolved solids, chemical oxygen demand, bicarbonates, and concentrations of various cations and anions. The samples generally had neutral pH levels between 6 and 7. Concentrations of ions like sodium, potassium, calcium, magnesium, chloride, and nitrates varied across sample locations. The analysis was conducted using a spectrophotometer and atomic absorption spectrometer with an air-acetylene flame.