Professional Documents
Culture Documents
RRU5905w Technical Specifications (V100R016C10 - 01) (PDF) - en
RRU5905w Technical Specifications (V100R016C10 - 01) (PDF) - en
V100R016C10
Technical Specifications
Issue 01
Date 2020-04-07
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: https://www.huawei.com
Email: support@huawei.com
Contents
Product Versions
The following table lists the base station product versions related to the RRU.
Intended Audience
This document is intended for:
● Network planners
● Onsite engineers
● System engineers
Organization
01 (2020-04-07)
This is the first commercial release.
Compared with Draft B (2020-03-09), this issue does not include any new topics
or changes, or exclude any topics.
Draft B (2020-03-09)
This is a draft.
Compared with Draft A (2020-01-20), this issue does not include any new topics.
Compared with Draft A (2020-01-20), this issue includes the following changes.
Compared with Draft A (2020-01-20), this issue does not exclude any topics.
Draft A (2020-01-20)
This is a draft.
3 RRU5905w (1800 MHz) Added support for NR FDD and multiple modes
Technical Specifications including NR FDD by the RRU5905w (1800 MHz).
● In the following, G is short for GSM, L is short for LTE FDD, M is short for LTE
NB-IoT, and N (FDD) is short for NR FDD.
● In the following, NR SUL indicates that NR FDD is supported only in the
uplink. It is abbreviated as N (SUL).
Table 3-1 Frequency bands and RATs supported by an RRU5905w (1800 MHz)
a: ATBR in the TX/RX Mode column indicates that the RF module uses A
transmit channels and B receive channels.
The bandwidth information in Supported Bandwidth is the standard bandwidth that can
be configured for a single-mode carrier when only one carrier is configured. In any carrier
combination scenario, the total bandwidth of all carriers cannot exceed the IBW value. For
details about the bandwidth that can be configured for each carrier in each carrier
combination scenario, see Output Power Configuration in the following table.
Table 3-3 Output power and carrier configurations of an RRU5905w (1800 MHz)
a: AxC W in the Maximum Output Power column indicates that the number of
TX channels of the RF module is A and the maximum output power of each TX
channel is C W.
Table 3-4 SUL carrier configurations of an RRU5905w (LN, 1800 MHz, 2R)
2 (MIMO) 1 15/20
Table 3-5 SUL carrier configurations of an RRU5905w (GLN, 1800 MHz, 2R)
4 2 (MIMO) 1 15/20
6 1 (MIMO) 1 15/20
The uplink bandwidth of an LTE carrier enabled with uplink spectrum sharing must be the
same as the uplink bandwidth of an NR carrier. For detailed bandwidth, see the value in the
Bandwidth per NR SUL Carrier (MHz) column in the preceding table. The uplink
bandwidth of an LTE carrier that is not enabled with uplink spectrum sharing is not limited
by the NR SUL bandwidth.
Receiver Sensitivity
RF Compliance Standards
Item Standard
Item Standard
Input Power
DC RRUs can use external power modules to support AC scenarios. For details about the
types of external power modules supported by each type of RRU, see section "RRU Auxiliary
Devices" in the corresponding RRU hardware description. For details about the external
power modules, see user guides of the corresponding models.
Item Specification
1800 370
Environmental Specifications
The output power of an RRU temporarily decreases when it operates at temperature ranges
10ºC (50ºF) less than or equal to its maximum rated value. This is dependent on
installation scenario, traffic load, and carrier configuration.
● Unless otherwise specified, the lightning protection specifications depend on the surge
waveform of 8/20 μs.
● Unless otherwise specified as maximum discharge current, all the surge current items refer
to nominal discharge current.
Item Specifications
a: The validity period is one year. The product can function properly within the
validity period if the storage environment meets the preceding standards.
Table 3-14 CPRI port protocol and rate of an RRU5905w (1800 MHz)
2 CPRI 1.25/2.5/4.9/9.8
The following table lists the maximum level of cascading and maximum distance
between an RRU and a BBU when the RRU works in a single mode. When the RRU
works in multimode concurrency scenarios, the maximum level of cascading and
maximum distance between the multimode RRU and a BBU are determined by the
capabilities for the mode with the lowest capabilities.
GSM 6 40
LTE NB-IoT 4 20
NR SUL 4 20
NR FDD 4 20
● For details about the CPRI topologies supported by each RRU model, see RF Unit and
Topology Management.
● For details about the ALD capabilities supported by each RRU model (for example, the
capabilities of RF ports supporting RET antennas and TMAs), see ALD Management.
General Rules
● For an nT RF module (n is 2, 4, or 8), the restriction is as follows:
● The following table lists the available power configurations for each GSM
carrier.
Output Power per Carrier (Unit: Output Power per Carrier (Unit:
W) dBm)
80.0 49.0
60.0 47.8
40.0 46.0
31.0 44.9
30.0 44.8
27.0 44.3
25.0 44.0
20.0 43.0
16.0 42.0
15.0 41.8
14.0 41.5
13.3 41.2
13.0 41.1
12.0 40.8
11.0 40.4
10.0 40.0
9.5 39.8
9.0 39.5
8.5 39.3
8.0 39.0
7.5 38.8
7.0 38.5
6.0 37.8
5.5 37.4
5.0 37.0
4.0 36.0
3.7 35.7
Output Power per Carrier (Unit: Output Power per Carrier (Unit:
W) dBm)
3.1 34.9
3.0 34.8
2.5 34.0
2.0 33.0
1.5 31.8
1.0 30.0