TECHNICAL MANUAL

80-0421-13 KT5½
5-½” (140 mm) 18,700 lbs-ft Hydraulic Power Tong
6-¼” (159 mm) CLINCHER® Backup

SPECIFICATIONS | OPERATION | MAINTENANCE | PARTS

MCCOYGLOBAL.COM
 ©2006 - 2015 McCoy Global

ORIGINAL INSTRUCTIONS
This technical document applies to the following models:
OVERALL MODEL TONG MODEL BACKUP MODEL REV DESCRIPTION
5-½” configured power tong & compression load cell-style 6-¼”
80-0421-13 80-0420-28 85-0398 0 CLINCHER® backup. Tong equipped with hydraulic motor con-
trol, lift control, backup control, & rigid sling.
5-½” configured power tong & compression load cell-style 6-¼”
CLINCHER® backup. Tong equipped with hydraulic motor con-
80-0421-14 80-0420-29 85-0398 0 trol, lift control, backup control, & rigid sling. CLOSED CENTRE
HYDRAULICS

THIS EQUIPMENT USES A DOOR SWITCH SYSTEM DESIGNED TO INTERRUPT TONG ROTATION WHEN
TONG DOOR IS OPENED
McCoy has made an effort ensure that all illustrations are accurate, but please note that some illustrations
used in this manual may not exactly visually match your equipment.

PATENTED & PATENTS PENDING

80-0421-13 Technical Manual
KT5½-18.7K Hydraulic Power Tong
6¼ in CLINCHER® Backup Page iii
  
©2006 - 2015 McCoy Global  
 
EC DECLARATION OF CONFORMITY 
Manufacturer Information 
  McCoy Global Canada  
  14755 – 121A Avenue, Edmonton, AB, T5L 2T2, Canada 
 
Product Description 
Product Identification: Model:  80‐0421‐13  Serial Number: 20150159 & 20150160 
Product Description:    KT 5500‐6250 CBU 
McCoy Global Technical Construction File Reference: T104 
Hydraulically powered tong, with/without backup provided as a means of making up, or breaking out, 
high torque tubular connections within the following specifications: 
 
Specification  Imperial Unit  Metric Unit 
Maximum Torque        18700 Ft/lbs       25357 Nm 
Arm Length         32.0 Inch       81.3 Cm 
Mass          2130 Lbs       966 Kg 
Torque (Ft Lbs/N M, Estimated) 
At Pressure        2250 Psi       155 Bar 
        3740 Hi       5071 Full 
          18700 Lo       25357 Full 
   
Speed (Rpm, Estimated) 
At flow rate        60 GPM        227 LPM 
     
        77.0 Hi        77.0 Full 
        15.4 Lo       15.4 Full 
Jaw size range  (Inch)        2 3/8 From       5 1/2 to 
Overall Length          52.0 In       132.1 Cm 
Overall Width        37.0 In       94.0 Cm 
Overall Height          72.6 In       184.5 Cm 
 

Noise Information 
Current Rev:  Author:  Created Date:  Approved by:  Approved Date: 
01  C. SANCHEZ  11/27/2014  W.MONDRAGON  03/03/2015 
 
File: F‐CAN3‐QA‐20 EC Declaration of Conformity.docm / Revision: 01  Page 1 of 2 
Technical Manual
Print Date: 6/20/2015 10:54 AM  80-0421-13
KT5½-18.7K Hydraulic Power Tong
Page iv 6¼ in CLINCHER® Backup