Professional Documents
Culture Documents
Advisor: Global Service Learning & Performance Division
Advisor: Global Service Learning & Performance Division
1
The components in the monitoring system consist of the Advisor
graphical display module (1) and the in-dash instrument cluster (2). The
graphical display module has a self contained ECM (Advisor ECM).
2
Advisor is used to access, monitor, and display operating characteristics,
diagnostics and events, and modes of operation. It is also used to view
and change operator preferences and parameters,
3
NOTE: The column of five buttons at the left of the display screen currently have no function.
4
The Caterpillar Monitoring and Display System (CMDS)
5
The Advisor provides the operator with the following information:
•Operating Characteristics of the Machine
•Diagnostics
•Service Intervals
•Warning Events
•Modes of Operation
6
Advisor provides three Warning Category Indicators (levels), utilizing
pop-up" warning messages on Advisor's screen
7
Advisor allows the technician to perform and access the following:
8
This preliminary screen asks if the operator wishes to use the operator
preferences that were active the last time the machine was operated.
9
The "Performance 1 of 2" screen will appear on the display after any
pop-up warning screens have been acknowledged.
10
Using the left and right ARROW buttons allows the operator to switch
back and forth between the two Performance screens.
11
Advisor Contact Description
Contact Number Function Type
1 Battery Power
2 Battery Negative Ground
3 Key Switch Input
7 Alternator Input
8 Cat Data Link (+) Input/Output
9 Cat Data Link (-) Input/Output
14 Fuel Level Sender Input
18 Analog Return Return
23 Digital Common Not Used
30 Digital 7 Not Used
34 CAN C Data Link (-) Input/Output
50 CAN C Data Link (+) Input/Output
54 Rear Action Lamp Output
55 Rear Action Lamp Return Return
66 Chassis Ground Ground
12