Professional Documents
Culture Documents
EK Tutorial
EK Tutorial
• Free Download
Zoom and Shake Transition Presets
DaVinci Resolve contains a lot of LUTs and we'll learn how to use a Cinematic LUT. As you know,
LUT(Lookup Table) is the color correction of changing colors to make pictures and videos visually
stand out.
It depends on which LUT you use, your photos or videos can feel warm or cold and many different
feelings.
Among many LUTs in DaVinci Resolve, this time I tried "Blackmagic 4K Film to Rec709".
1.Click the project settings icon in the bottom right hand corner of the screen.
2. Timeline resolution is in 1920x1080 HD. Timeline frame rate is 30 frames per second.
Playback frame rate is 30 frames per second. Video format is HD 1080p 30.
Now, when project settings are finished, you should learn how to use DaVinci Resolve owned LUT.
I'll show you two ways to apply LUT and let's do the first one.
1. Put clip to the timeline.
2. Go to Color page.
3. LUTs and Blackmagic Design (Click)
4. Blackmagic 4K Film to Rec709 (Double click)
You can see the difference between before and after the application of LUT as you can see.
Before
After
2. Mouse over "LUTs > 3D LUT > Blackmagic Design" and click "Blackmagic 4K Film to Rec709".
You can see what it looks like after it has been applied.
3. SPIN TRANSITION
Free Download
Free Spin Transition Presets
9. Delete "Merge1"
10. Drag downloaded setting preset file onto the Node window.
11. Connect "MediaIn1 --- Transform1", "MediaIn2 --- Transform2", "RadialBlur1 --- MediaOut1"
12. Go back to the Edit page to see if it works.
4.WHIP TRANSITION
• Free Download
Free Whip Transition Presets
6. Select clip A' and B'(which has been pulled and raised) and make "New fusion Clip..."(right click)
7. Go to Fusion page.
Fusion, Nodes editor :
8. Remove the line from "Merge1" and "MediaOut1".
9. Delete "Merge1"
10. Drag the downloaded preset file onto the Node editor.
11. Connect "MediaIn1 --- Transform1", "MediaIn2 --- Transform2", "CameraShake1 --- MediaOut1"
12.Go back to the Edit page to see if it works.
5.LUMA FADE TRANSITION
Free Download
Free Luma Fade Transition Preset
2. Cut 30 frames forward from the end of clip A and raise them up(=clip A').
3. Pull clip B to the end of clip A.
4. Select clip A'(which has been cut and raised) and go to Fusion page.
9. Select the last frame from the KeyFrames window or timeline and change the number (Low 0.0, High 0.0) of
the Channel(luminance).
12. Check that "Invert" is checked.
13.Go back to the Edit page to see if it works.
5. Zoom & Spin With Shake
Free Dwonload
Free Zoom and Spin Transition Presets
• DaVinci Resolve 16
Free DaVinci Resolve Download
https://www.blackmagicdesign.com/products/davinciresolve/
1.Click the project settings icon in the bottom right hand corner of the screen.
3. Cut clip B from the front to the end with 20 frames(=clip B').
4. Raise clip B'.
9. Delete "Merge1"
10. Drag the downloaded setting preset file onto the Node window.
11. Connect "MediaIn1 --- Transform1", "MediaIn2 --- Transform2", "RadialBlur1 --- MediaOut1"
12. Go back to the Edit page to see if it works.
How To Install Luts
This time, we'll learn how to use the "freshluts.com" site where you can use various LUTs as your free.
Let me explain how to install the downloaded LUT file from DaVinci Resolve.
1. Enter https://freshluts.com and log in. If you have not signed up yet, press the Sign Up button to join the
membership.
2. Once you have logged in, go to the bottom of the screen to see the LUTs you can download.
3. I downloaded "Magenta Dream" among them. Press the Download LUT button on the page of "Magenta
Dream" to download.
11. You can check that the LUT file is installed in the "Color" page.
(6) whip & Roll + (7) Zoom & Roll
• DaVinci Resolve 16
Free DaVinci Resolve Download
https://www.blackmagicdesign.com/products/davinciresolve/
1.Click the project settings icon in the bottom right hand corner of the screen.
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion page.
Fusion, Nodes window :
6. Remove the line from "MediaOut1".
7. Drag the downloaded setting preset file onto the Node window.
8. Reconnect the downloaded preset file with "MediaIn1" and "MediaOut1"
1.Click the project settings icon in the bottom right hand corner of the screen.
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion page.
1.Click the project settings icon in the bottom right hand corner of the screen.
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion.
Glitch1
1. Put clip A(front) and clip B(rear) on timeline.
2. Cut clip A from the end to the front with 15 frames (=clip A').
3. Cut clip B from the front to the end with 25 frames (=clip B').
4. Select clip A' and B' and make "New fusion Clip..." (right click)
5. Go to Fusion page.
Fusion page, Nodes editor :
6. Remove the line from "MediaOut1".
7. Drag & drop downloaded preset file onto the Node editor.
8. Reconnect the preset file with "MediaIn1" and "MediaOut1"
Glitch2
1. Put clip A(front) and clip B(rear) on timeline.
2. Cut clip A from the end to the front with 10 frames (=clip A').
3. Cut clip B from the front to the end with 10 frames (=clip B').
4. Select clip A' and B' and make "New fusion Clip..." (right click)
5. Go to Fusion page.
Fusion page, Nodes editor :
6. Remove the line from "MediaOut1".
7. Drag & drop downloaded preset file onto the Node editor.
8. Reconnect the preset file with "MediaIn1" and "MediaOut1"
Glitch3
1. Put clip A(front) and clip B(rear) on timeline.
2. Cut clip A from the end to the front with 10 frames (=clip A').
3. Cut clip B from the front to the end with 15 frames (=clip B').
4. Select clip A' and B' and make "New fusion Clip..." (right click)
5. Go to Fusion page.
Fusion page, Nodes editor :
6. Remove the line from "MediaOut1".
7. Drag & drop downloaded preset file onto the Node editor.
8. Reconnect the preset file with "MediaIn1" and "MediaOut1"
Glitch4
1. Put clip A(front) and clip B(rear) on timeline.
2. Cut clip A from the end to the front with 15 frames (=clip A').
3. Cut clip B from the front to the end with 25 frames (=clip B').
4. Select clip A' and B' and make "New fusion Clip..." (right click)
5. Go to Fusion page.
Fusion page, Nodes editor :
6. Remove the line from "MediaOut1".
7. Drag & drop downloaded preset file onto the Node editor.
8. Reconnect the preset file with "MediaIn1" and "MediaOut1"
12 Light Leak
• How to use
- Light Leak1
1. Put clip A(front) and clip B(rear).
2. Cut clip A from the end to the front with 20 frames(=clip A').
3. Cut clip B from the front to the end with 20 frames(=clip B').
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion page.
Fusion, Nodes Editor :
6. Drag & drop downloaded preset file onto the Node Editor.
7. Connect the preset file with "MediaIn1" and "MediaOut1"
- Light Leak2
1. Put clip A(front) and clip B(rear).
2. Cut clip A from the end to the front with 20 frames(=clip A').
3. Cut clip B from the front to the end with 40 frames(=clip B').
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion page.
Fusion, Nodes Editor :
6. Drag & drop downloaded preset file onto the Node Editor.
7. Connect the preset file with "MediaIn1" and "MediaOut1"
- Light Leak3
1. Put clip A(front) and clip B(rear).
2. Cut clip A from the end to the front with 40 frames(=clip A').
3. Cut clip B from the front to the end with 60 frames(=clip B').
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion page.
Fusion page, Nodes Editor :
6. Drag & drop downloaded preset file onto the Node Editor.
7. Connect the preset file with "MediaIn1" and "MediaOut1"
- Light Leak4
1. Put clip A(front) and clip B(rear).
2. Cut clip A from the end to the front with 15 frames(=clip A').
3. Cut clip B from the front to the end with 30 frames(=clip B').
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion page.
Fusion page, Nodes Editor :
6. Drag & drop downloaded preset file onto the Node Editor.
7. Connect the preset file with "MediaIn1" and "MediaOut1"
13. Roll Transition
• How to use
1. Put clip A(front) and clip B(rear).
2. Cut clip A from the end to the front with 20 frames(=clip A').
3. Cut clip B from the front to the end with 20 frames(=clip B').
4. Select clip A' and B' and make "New fusion Clip..."(right click)
5. Go to Fusion page.
Fusion page, Nodes Editor :
6. Drag & drop downloaded preset file onto the Node Editor.
7. Reconnect the downloaded preset file with "MediaIn1" and "MediaOut1"
14. Smooth Zoom
Same