Professional Documents
Culture Documents
Sigmacover™: Recoatable Epoxy Systems
Sigmacover™: Recoatable Epoxy Systems
Sigmacover™: Recoatable Epoxy Systems
SIGMACOVER™
RECOATABLE EPOXY SYSTEMS
PRODUCT LINE SERVING EUROPE, MIDDLE EAST AND AFRICA
www.sigmacoatings.com/protective
SIGMACOVER™ RECOATABLE EPOXY SYSTEMS
• CIVILINFRASTRUCTURE • RAIL
• MARINE NEW-BUILD • OFFSHORE
• MARINE DRY DOCK • PETROCHEMICAL
• MARINE SEA STOCK • POWER
SIGMA COATINGS®
A GLOBAL BRAND YOU CAN TRUST
AND SERVICE YOU CAN RELY ON
SIGMACOVER is a range of tough, durable epoxy coatings The SIGMACOVER range of protective coatings is widely used.
designed to deliver outstanding corrosion protection for They are trusted to meet the challenges in corrosive
both new construction and maintenance of major assets. industrial environments.
www.sigmacoatings.com/protective
SIGMACOVER™ RECOATABLE EPOXY SYSTEMS
SIGMACOVER 630
High-solids, surface-tolerant epoxy. Available in aluminium SIGMACOVER 280
and a wide range of colours. Low-temperature cure option Universal epoxy primer for steel and non-ferrous materials
SIGMACOVER 435
Low-temperature micaceous iron oxide-pigmented recoatable SIGMACOVER 256
epoxy coating. Heat resistance up to 200°C Zinc phosphate recoatable epoxy primer
SIGMACOVER 805
High-solids epoxy
SIGMACOVER 435
Micaceous iron oxide-pigmented recoatable epoxy coating
SIGMACOVER 410
SIGMACOVER 480 Economical epoxy buildcoat for use in atmospheric conditions
Epoxy finish with good chemical resistance
Ideal for use in atmospheric land and marine conditions,
SIGMACOVER 480 is a general general-purpose epoxy SIGMACOVER 410 can be recoated with two-pack and
providing an excellent chemical resistant finish. conventional coatings, even after prolonged weathering
conditions. It is available in micaceous iron oxide and in
• Resistant to impact and abrasion a selected colour range.
• Extended recoating intervals and a lasting clean finish
• Easy application by brush, roller and spray • Excellentdurability on steel or concrete
• Easyapplication by airless spray
• Low-temperature cure version allows curing down to -5°C
SIGMACOVER 456
Unlimited recoatable epoxy coating
www.sigmacoatings.com/protective
SIGMACOVER™ RECOATABLE EPOXY SYSTEMS
SURFACE-TOLERANT COATINGS
SIGMACOVER 1500 is a surface-tolerant epoxy coating that has As a primer and buildcoat compatible with most aged coatings,
been specially designed to facilitate easy maintenance. It is SIGMACOVER 630 is a cost-effective protective and maintenance
compatible with most aged coatings and is ideal for use in solution. It delivers excellent corrosion resistance in industrial
sensitive locations. SIGMACOVER 1500 reduces explosion risk and coastal applications.
and fire hazard. It also protects workers and the environment
by minimising solvent exposure during application. • Primer and buildcoat
• Available in aluminium and a wide range of colours
• Primer and buildcoat • Good impact and abrasion resistance
• Solvent-free • Resistance to splash and spillage of a wide variety of chemicals
• Compatible with most aged coatings • Low-temperature and tropical-grade cure available
• Excellentcorrosion resistance in industrial and
coastal applications
SIGMACOVER 380
Multipurpose, high-build epoxy priming system
SIGMACOVER 1000
High-build, solvent-free epoxy SIGMACOVER 380 can be used in a wide range of applications
and is suitable for permanent immersion service.
SIGMACOVER 1000 is an ultra-high-build coating that provides
up to 1000 microns in just one coat. It provides ultimate • Aluminium reinforced surface-tolerant epoxy
protection in both atmospheric and immersion applications. • Suitable for permanent immersion
• Good anticorrosive properties and water resistance
• Single-coat protection • Resistant to well-designed cathodic protection
• Can be immersed after only 4 hours ambient cure • Suitable for both newbuilding and maintenance applications
• Applied by heavy-duty, single-feed airless equipment
SIGMACOVER 350
Two-component, high-build epoxy coating
SIGMACOVER 640 is a universal self-priming coating. SIGMACOVER 240 is a two-component, high-solids epoxy
It exhibits excellent surface-tolerant characteristics coating; it can be applied directly to metallic surfaces. It dries
and is low-VOC. SIGMACOVER 640 is suitable for use in a quickly at low temperatures and delivers excellent resistance
wide range of industrial, coastal and offshore applications. against seawater, chemically polluted water and crude oil.
BUILDCOATS
SURFACE-TOLERANT COATINGS
www.sigmacoatings.com/protective
PPG PROTECTIVE & MARINE COATINGS
No rights can be derived from the content of this publication. Unless otherwise agreed upon in writing, all products and technical advice given are subject to general terms and conditions
of PPG Coatings BVBA. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.