Professional Documents
Culture Documents
Weldlok 15 Data Sheet
Weldlok 15 Data Sheet
Weldlok 15 Data Sheet
Features :
• Lateral adjustability
• Positive lateral rail restraint See clip selection table for «F» dimension
• Self-locking
• Standand Hex Head Bolt
• Made in USA*
1 Notes:
* Made in USA Options Available, contact Gantrex at time of Bid
*2 Clip rating based on using AISC Weld Strength definition of 70 ksi. Derating for AISC Load
conditions and stress categories may apply per application.
*3 Galvanized option available, contact Gantrex
NOTES
1. The Weldlok 15 features a cast iron upper component and hot vulcanized bonded rubber nose; forged steel upper option available (Contact Gantrex
if desired).
2. To order clips without rubber noses consult GANTREX for proper selection.
3. GANTREX clips are available to suit most rail sections. Please consult GANTREX for details if your rail does not appear in the above table.
4. GANTREX recommends that rail joints be welded wherever possible.
5. If more vertical clearance is needed, 1 1/2” long bolts may be substituted for standard 1 3/4” long bolts, in which case the overall clip height is
reduced to 1 7/8”. Ask GANTREX for information on low profile clips, such as the RailLok™ series.
6. Contact GANTREX for available protective coatings.
COMPONENTS MATERIALS
Upper Component Ductile Cast Iron or Forged Steel
Lower Component Weldable Forged Steel
Pressure Block (Nose) Synthetic Rubber
We reserve the right to discontinue or change specifications or design at any time without prior notice and without incurring
any obligation whatsoever.
Disclaimer: for regional use only