Professional Documents
Culture Documents
Quiz 4 Bme4a
Quiz 4 Bme4a
25 CIIT/FA19- MOIZ KHAN Q.1. Inclusions are defects in poured metal caused
BME- by contaminants. The number of (large) inclusions in
103/SWL cast iron follows a Poisson distribution with a mean of
2.5 per cubic millimetre. Determine the following:
a. Probability of at least one inclusion in a cubic
millimetre. (Use formula method) (4)
b. Instead of a mean of 2.5 per cubic millimetres, what
will be the mean inclusions per cubic millimetre such
that the probability of at least one inclusion is 0.95?
(5)
Q.2. The time until recharge for a battery in a laptop
computer under common conditions is normally
distributed with a mean of 260 minutes and a standard
deviation of 50 minutes.
a. What are the quartiles (the 25% and 75% values) of
battery life? (6)
b. What value of life in minutes is exceeded with 95%
probability? (5)
26 CIIT/FA19- ALI RAZA Q.1. Inclusions are defects in poured metal caused
BME- by contaminants. The number of (large) inclusions in
107/SWL cast iron follows a Poisson distribution with a mean of
2.5 per cubic millimetre. Determine the following:
a. Probability of at least five inclusions in 5.0 cubic
millimetres. (Use table method) (4)
b. Volume of material to inspect such that the
probability of at least one inclusion is 0.9994.
(5)
Q.2. Cholesterol is a fatty substance that is an
important part of the outer lining (membrane) of cells
in the body of animals. Its normal range for an adult is
120–240 mg/dl. The Food and Nutrition Institute of
the Philippines found that the total cholesterol level for
Filipino adults has a mean of 159.2 mg/dl and 84.1%
of adults have a cholesterol level less than 200 mg/dl
(www.fnri.dost.gov.ph/). Suppose that the total
cholesterol level is normally distributed.
a. Determine the standard deviation of this
distribution. (5)
b. What are the quartiles (the 25% and 75%
percentiles) of this distribution? (6)