Professional Documents
Culture Documents
C% MN% Si% P% Max S% Max: The Ladle Analysis of The Steel Shall Be Given As Below
C% MN% Si% P% Max S% Max: The Ladle Analysis of The Steel Shall Be Given As Below
Requirements:
Method of Deoxidation – Fully Killed Steel
Delivery Condition – Normalized / Normalized or Annealed.
Normalizing Temperature –830 – 860 ° C
Chemical Composition:
The ladle analysis of the steel shall be given as below.
C% Mn % Si % P% S%
max max
0.40 to 0.50 0.60 to 0.90 0.15 to 0.35 0.040 0.040
1. The steel is killed by Aluminum , the total aluminum content shall not be less than 0.02 %
2. When Nickel, Chromium, Copper, Molybdenum and Vanadium are added, the content must conform
to one of the following :
Nickel : 0.30 max
Chromium : 0.30 max
Copper : 0.25 max
Molybdenum : 0.05 max
Vanadium : 0.05 max
Mechanical Properties:
As per the
620 320 15 175 830 - 860 figure given
below
AMDPPL/TDC/001 Page 1
TDC NO AMDPPL/TDC/001 TECHNICAL DELIVERY CONDITION FOR
STEEL – GRADE C 45 _ CLASS 4
REV/DATE 01/31.12.2010 AS PER IS 2004 : 1991
Prepared By Approved By
AMDPPL/TDC/001 Page 2