Professional Documents
Culture Documents
Cognis GMBH: Material Safety Data Sheet According To 91/155/eec - Iso 11014-1
Cognis GMBH: Material Safety Data Sheet According To 91/155/eec - Iso 11014-1
Cognis GMBH: Material Safety Data Sheet According To 91/155/eec - Iso 11014-1
Page 1 of 6
SDS no. : 10898
DEHYQUART A-CA Revision: 17.01.2007
printing date: 12.02.2008
Trade name:
DEHYQUART A-CA
Usage:
Cationic products, conditioners
Company name:
Cognis GmbH
- Standort Illertissen
Robert-Hansen-Str. 1
89257 Illertissen
Phone: +49 (7303) 13-0
Emergency information:
++49-(0)211-797-3350
3. Hazards identification
Special hazards for man and environment:
R22 Harmful if swallowed.
R38 Irritating to skin.
R41 Risk of serious damage to eyes.
R50 Very toxic to aquatic organisms.
After inhalation:
Move to fresh air.
After skin contact:
Rinse with water. Take off all clothing contaminated by the product.
After eye contact:
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Cognis GmbH
Page 2 of 6
SDS no. : 10898
DEHYQUART A-CA Revision: 17.01.2007
printing date: 12.02.2008
After ingestion:
Rinse mouth and throat. Drink 1-2 glasses of water. Seek medical advice.
5. Fire-fighting measures
Suitable extinguishing media:
foam, extinguishing powder, carbon dioxide
water spray jet
Extinguishing media which must not be used for safety reasons:
None known
Special protection equipment for firefighters:
Wear respiratory protection equipment according to ambient air conditions.
Special hazards by the product itself:
Non-combustible.
Personal precautions:
Avoid contact with skin and eyes.
Environmental precautions:
Do not empty into drains / surface water / ground water.
Process for cleaning and take-up:
Remove with liquid-absorbing material (sand, peat, sawdust).
Storage:
Store frost-free.
< + 40 °C
> + 10 °C
Page 3 of 6
SDS no. : 10898
DEHYQUART A-CA Revision: 17.01.2007
printing date: 12.02.2008
Hand protection:
Suitable are protective gloves with the following specification. The recommendation is valid for laboratory
conditions, specific workplace conditions must be taken into consideration separately.
Recommended protective gloves Breakthrough time Remark
Material / coating thickness
Viton / 0,7 mm Level 6 > 480 min. In case of full contact
Eye protection:
Goggles which can be tightly sealed.
General protection and hygiene measures:
Wash hands before work breaks and after finishing work.
Avoid contact with skin and eyes. Remove soiled or soaked clothing immediately. Wash off any contamination
that gets onto the skin with plenty of water and soap, skin care.
Materials to avoid:
None if used for intended purpose.
Dangerous decomposition products:
None known
Page 4 of 6
SDS no. : 10898
DEHYQUART A-CA Revision: 17.01.2007
printing date: 12.02.2008
Sensitizing:
Dermal sensitization: non-sensitizing. (Experiment)
In vitro mutagenicity:
not mutagenic
Method: Ames test
Page 5 of 6
SDS no. : 10898
DEHYQUART A-CA Revision: 17.01.2007
printing date: 12.02.2008
Page 6 of 6
SDS no. : 10898
DEHYQUART A-CA Revision: 17.01.2007
printing date: 12.02.2008
R-phrases:
R22 Harmful if swallowed.
R38 Irritating to skin.
R41 Risk of serious damage to eyes.
R50 Very toxic to aquatic organisms.
S-phrases:
S24/25 Avoid contact with skin and eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28 After contact with skin, wash immediately with plenty of water.
S37/39 Wear suitable gloves and eye/face protection.
S46 If swallowed, seek medical advice immediately and show this container or label.
Hazard trigger:
Cetrimonium chloride