Professional Documents
Culture Documents
74LVC1GU04-Q100: 1. General Description
74LVC1GU04-Q100: 1. General Description
74LVC1GU04-Q100: 1. General Description
Unbuffered inverter
Rev. 2 — 13 December 2016 Product data sheet
1. General description
The 74LVC1GU04-Q100 is a single unbuffered inverter.
The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of
this device in a mixed 3.3 V and 5 V environment.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74LVC1GU04GW-Q100 40 C to +125 C TSSOP5 plastic thin shrink small outline package; SOT353-1
5 leads; body width 1.25 mm
74LVC1GU04GV-Q100 40 C to +125 C SC-74A plastic surface-mounted package; 5 leads SOT753
Nexperia 74LVC1GU04-Q100
Unbuffered inverter
4. Marking
Table 2. Marking codes
Type number Marking[1]
74LVC1GU04GW-Q100 VD
74LVC1GU04GV-Q100 VU4
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
9&& 9&&
ȍ
$ <
$ <
Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram
6. Pinning information
6.1 Pinning
/9&*84
QF 9&&
$
*1' <
DDD
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
7. Functional description
Table 4. Function table[1]
Input (A) Output (Y)
L H
H L
8. Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +6.5 V
IIK input clamping current VI < 0 V - 50 mA
VI input voltage [1] 0.5 +6.5 V
IOK output clamping current VO > VCC or VO < 0 V - 50 mA
VO output voltage Active mode [1][2] 0.5 VCC + 0.5 V
IO output current VO = 0 V to VCC - 50 mA
ICC supply current - +100 mA
IGND ground current - 100 mA
Ptot total power dissipation Tamb = 40 C to +125 C [3] - 250 mW
Tstg storage temperature 65 +150 C
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
[3] For TSSOP5 and SC-74A packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K.
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
[1] All typical values are measured at VCC = 3.3 V and Tamb = 25 C.
[1] Typical values are measured at Tamb = 25 C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively.
[2] tpd is the same as tPLH and tPHL.
[3] CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD VCC2 fi N + (CL VCC2 fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CL VCC2 fo) = sum of outputs.
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
12. Waveforms
9,
$LQSXW 90
*1'
W 3+/ W 3/+
92+
<RXWSXW 90
92/ PQD
PQD
*IV
P$9
5ELDV Nȍ
9&&
) LQSXW RXWSXW )
9,
$ ,2
PQD
9&&9
Tamb = 25 C. I o
G fs = ---------
V I
fi = 1 kHz at VO is constant
Fig 6. Typical forward transconductance as a Fig 7. Test set-up for measuring forward
function of supply voltage transconductance
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
9(;7
9&&
5/
9, 92
* '87
57 &/ 5/
PQD
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
5 5
9&&
5
) 5 8
8
& &
=/ RXW
PQD PQD
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627
' ( $
;
F
\ +( Y 0 $
=
$ $
$
$
ș
/S
/
H Z 0
ES
H GHWDLO;
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
$ '
81,7 $ $ $ ES F ( H H +( / /S Y Z \ = ș
PD[
PP
1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
627 02
6&$
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
3ODVWLFVXUIDFHPRXQWHGSDFNDJHOHDGV 627
' % ( $
;
\ +( Y 0 $
$
F
/S
GHWDLO;
H ES Z 0 %
PP
VFDOH
',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
81,7 $ $ ES F ' ( H +( /S 4 Y Z \
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
15. Abbreviations
Table 11. Abbreviations
Acronym Description
CMOS Complementary Metal Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
MIL Military
MM Machine Model
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nexperia.com.
17.3 Disclaimers Nexperia does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
Limited warranty and liability — Information in this document is believed to
third party customer(s). Customer is responsible for doing all necessary
be accurate and reliable. However, Nexperia does not give any
testing for the customer’s applications and products using Nexperia
representations or warranties, expressed or implied, as to the accuracy or
products in order to avoid a default of the applications and
completeness of such information and shall have no liability for the
the products or of the application or use by customer’s third party
consequences of use of such information. Nexperia takes no
customer(s). Nexperia does not accept any liability in this respect.
responsibility for the content in this document if provided by an information
source outside of Nexperia. Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
In no event shall Nexperia be liable for any indirect, incidental,
damage to the device. Limiting values are stress ratings only and (proper)
punitive, special or consequential damages (including - without limitation - lost
operation of the device at these or any other conditions above those given in
profits, lost savings, business interruption, costs related to the removal or
the Recommended operating conditions section (if present) or the
replacement of any products or rework charges) whether or not such
Characteristics sections of this document is not warranted. Constant or
damages are based on tort (including negligence), warranty, breach of
repeated exposure to limiting values will permanently and irreversibly affect
contract or any other legal theory.
the quality and reliability of the device.
Notwithstanding any damages that customer might incur for any reason
whatsoever, Nexperia’s aggregate and cumulative liability towards Terms and conditions of commercial sale — Nexperia
customer for the products described herein shall be limited in accordance products are sold subject to the general terms and conditions of commercial
with the Terms and conditions of commercial sale of Nexperia. sale, as published at http://www.nexperia.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
Right to make changes — Nexperia reserves the right to make agreement is concluded only the terms and conditions of the respective
changes to information published in this document, including without agreement shall apply. Nexperia hereby expressly objects to
limitation specifications and product descriptions, at any time and without applying the customer’s general terms and conditions with regard to the
notice. This document supersedes and replaces all information supplied prior purchase of Nexperia products by customer.
to the publication hereof.
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
No offer to sell or license — Nothing in this document may be interpreted or Translations — A non-English (translated) version of a document is for
construed as an offer to sell products that is open for acceptance or the grant, reference only. The English version shall prevail in case of any discrepancy
conveyance or implication of any license under any copyrights, patents or between the translated and English versions.
other industrial or intellectual property rights.
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
17.4 Trademarks
authorization from competent authorities. Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
74LVC1GU04_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved
19. Contents
1 General description . . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 1
4 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
6 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2
6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2
7 Functional description . . . . . . . . . . . . . . . . . . . 3
8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3
9 Recommended operating conditions. . . . . . . . 3
10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4
11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5
12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
13 Application information. . . . . . . . . . . . . . . . . . . 8
14 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9
15 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 11
16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11
17 Legal information. . . . . . . . . . . . . . . . . . . . . . . 12
17.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12
17.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
17.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
17.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13
18 Contact information. . . . . . . . . . . . . . . . . . . . . 13
19 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14