Professional Documents
Culture Documents
LTS2 Report Plates 040618r
LTS2 Report Plates 040618r
Date: 06/04/18
BH1 Location
1. Sample SPT1 (1.00m) – WC, AL, PD, PSD, PH, Chloride, Sulphate, Organic tests are not
possible; sample is not available.
2. Sample SPT3 (2.00m) – AL, PH and PD tests are not possible; insufficient amount of specimen
for the test.
3. Sample SPT5 (3.10m) – AL test is not possible; sample is nonplastic “silty SAND”.
Approved by: YWK
4. Sample S12 (6.50m) – UCS test aborted; sample was short and does not conform to diameter to
length ratio of 1:2.
5. Sample SPT14 (7.60m) – AL test is not possible; sample is nonplastic “sandy SILT”.
6. Sample SPT20 (10.60m) – AL test is not possible; sample is nonplastic “SILT, with sand”.
y
7. Sample PQ29 (16.40m) – AL test is not possible; sample is nonplastic “silty SAND”.
ar
8. Sample PQ33 (18.55m) – PD test is not possible; sample is cemented stone.
9. Sample PQ47 (29.20m) – AL test is not possible; sample is nonplastic “silty SAND”.
in
Date: 06/04/18
11. Sample PQ65 (46.70m) – AL test is not possible; sample is nonplastic “silty SAND”.
12. Sample PQ65 (46.70m) – Oedometer test is aborted; sample is “silty SAND, with few gravel”.
el
BH3 Location
Checked by: HS
1. Sample S5 (2.60m) – UW and PSD tests are not possible; sample contains numerous decayed
Pr
organic matters.
3. Sample PQ27 (14.10m) – UW, PD and PSD tests are not possible; sample is “intermixed coarse
gravel-sized CORALS, SAND and SHELL fragments”.
BH6 Location
1. Sample S8 (3.60m) – AL test is not possible; sample is nonplastic “SAND, with silt”.
Date: 06/04/18
2. Sample S20 (8.30m) – AL test is not possible; sample is nonplastic “SILT, with sand”.
3. Sample S20 (8.30m) – Maximum and minimum densities tests are not possible; the material is
not suitable for these methods because the percentage fines content exceeds 15% as per ASTM
D4253-16 and ASTM D4254-16 (Clause 1.5).
4. Sample S37 (13.05m) – AL test is not possible; sample is nonplastic “silty SAND”.
Made by: SD
FGEN – Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
6. Sample SPT42 (15.10m) – AL test is not possible; sample is nonplastic “silty SAND, with gravel”.
Date: 06/04/18
7. Sample PQ53 (23.35m) – AL test is not possible; sample is nonplastic “silty SAND”.
8. Sample PQ53 (23.35m) – Maximum and minimum densities tests are not possible; the material is
not suitable for these methods because the percentage fines content exceeds 15% as per ASTM
D4253-16 and ASTM D4254-16 (Clause 1.5).
9. Sample PQ57 (26.05m) – UCS test is not possible; insufficient amount of specimen for the test.
10. Sample SPT60 (28.60m) – AL test is not possible; sample is nonplastic “silty SAND”.
Approved by: YWK
11. Sample S67 (32.95m) – AL test is not possible; sample is nonplastic “Sandy SILT”.
12. Sample PQ73 (34.90m) – AL test is not possible; sample is nonplastic “sandy SILT”.
13. Sample S79 (39.30m) – AL test is not possible; sample is nonplastic “silty SAND”.
y
14. Sample PQ85 (42.60m) – AL test is not possible; sample is nonplastic “silty SAND”.
ar
15. Sample PQ87 (44.85m) – AL test is not possible; sample is nonplastic “silty SAND”.
16. Sample PQ87 (44.85m) – Maximum and minimum densities tests are not possible; the material is
in
not suitable for these methods because the percentage fines content exceeds 15% as per ASTM
Date: 06/04/18
BH9 Location
2. Sample S14 (5.80m) – AL test is not possible; sample is nonplastic “SILT, with sand”.
Checked by: HS
3. Sample S19 (7.45m) – AL test is not possible; sample is nonplastic “silty SAND”.
Pr
5. Sample S29 (10.45m) – Maximum and minimum densities tests are not possible; the material is
not suitable for these methods because the percentage fines content exceeds 15% as per ASTM
D4253-16 and ASTM D4254-16 (Clause 1.5).
6. Sample PQ41 (3.90m) – AL, UW, PD and PSD tests are not possible; sample is predominately
mixture of CORALS and SHELLS.
7. Sample PQ47 (19.00m) – AL test is not possible; sample is nonplastic “silty SAND”.
Date: 06/04/18
8. Sample PQ47 (19.00m) – Maximum and minimum densities tests are not possible; the material is
not suitable for these methods because the percentage fines content exceeds 15% as per ASTM
D4253-16 and ASTM D4254-16 (Clause 1.5).
9. Sample PQ55 (24.90m) – AL test is not possible; sample is nonplastic “silty SAND”.
10. Sample PQ61 (29.45m) – AL test is not possible; sample is nonplastic “sandy SILT”.
Made by: SD
11. Sample S63 (31.25m) – AL test is not possible; sample is nonplastic “sandy SILT”.
FGEN – Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
12. Sample S67 (32.90m) – AL test is not possible; sample is nonplastic “SILT, with sand”.
Date: 06/04/18
13. Sample PQ75 (37.10m) – AL test is not possible; sample is nonplastic “silty SAND”.
14. Sample PQ79 (41.20m) – AL test is not possible; sample is nonplastic “silty SAND”.
15. Sample PQ83 (45.10m) – AL test is not possible; sample is nonplastic “silty SAND”.
16. Sample PQ83 (45.10m) – Maximum and minimum densities tests are not possible; the material is
not suitable for these methods because the percentage fines content exceeds 15% as per ASTM
D4253-16 and ASTM D4254-16 (Clause 1.5).
Approved by: YWK
BH10 Location
1. Sample S8 (3.70m) – AL and UU tests are not possible; sample is nonplastic “silty SAND”.
y
2. Sample S17 (6.75m) – AL test is not possible; sample is nonplastic “silty SAND”.
gravel”. ar
3. Sample S24 (8.95m) – Oedometer test is aborted; sample is “Poorly-graded SAND, with silt and
4. Sample PQ29 (11.50m) – AL test is not possible; sample is nonplastic “silty SAND”.
in
Date: 06/04/18
5. Sample PQ29 (11.00m) – UCS test aborted; sample was short and does not conform to diameter
to length ratio of 1:2.
im
6. Sample S33 (14.00m) – WC, UW, PD, PSD and AL tests are not possible; sample was
apparently not delivered.
7. Sample PQ36 (16.15m) – AL test is not possible; sample is nonplastic “silty SAND”.
el
8. Sample PQ58 (32.95m) – AL test is not possible; sample is nonplastic “silty SAND”.
Checked by: HS
Pr
9. Sample PQ64 (38.50m) – UCS test is aborted; sample was short and does not conform to
diameter to length ratio of 1:2.
10. Sample PQ73 (46.70m) – AL and UCS tests are not possible; sample is nonplastic “SILT, with
sand”.
BH16 Location
3. Sample S14 (5.70m) – Oedometer and CD tests are not possible; sample is “very loose and
disturbed SAND”.
5. Sample S35 (12.90m) – UW test is not possible; sample is “very loose and disturbed SAND”.
Made by: SD
FGEN – Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
6. Sample PQ38 (14.00m) – AL, PD, PH and PSD tests are not possible; sample is predominantly
“corals and gravels”.
Date: 06/04/18
7. Sample PQ42 (17.00m) – AL test is not possible; sample is nonplastic “silty SAND”.
8. Sample PQ52 (24.50m) – AL test is not possible; sample is nonplastic “silty SAND”.
9. Sample PQ60 (30.50m) – Maximum and minimum densities tests are not possible; the material is
not suitable for these methods because the percentage fines content exceeds 15% as per ASTM
D4253-16 and ASTM D4254-16 (Clause 1.5).
10. Sample PQ68 (38.50m) – AL test is not possible; sample is nonplastic “silty SAND”.
Approved by: YWK
11. Sample PQ74 (44.50m) – AL test is not possible; sample is predominantly “GRAVEL”.
y
ar
in
Date: 06/04/18
im
el
Checked by: HS
Pr
Date: 06/04/18
Made by: SD
FGEN – Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Sample Unit Weight [kN/m³] Atterberg Limits c u [kPa]
No. Depth w 1 2 d d s Carb. Org. wp wL Ip Fines PP TV LV UU
min. max. Cont. Cont.
3.65 0
y
6.85 36.8 17.7 17.2 2.55 67
S13 7.25
7.40
37.6
32.5
17.4
17.9
17.6
17.7 ar
Checked By: HS
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 05/04/18
in
10
0
im
S2 1.55 Well-graded f. to co. GRAVEL, with silt & sand(GW-GM) 57 6.84 258.49
SPT3 2.10 Silty fine to medium SAND 131
SPT5 3.10 Silty medium to coarse SAND 67
SPT9 5.10 Sandy SILT 33
S12 6.85 Sandy SILT 37
SPT14 7.60 Sandy SILT 42
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH1 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 03/04/18
in
10
0
im
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH1 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Onshore UU
S2 1.90 Undisturbed 114.5 14.1 6.6 2.38 102.96 2.647 Very soft dark brown CLAY
Approved by: HS
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Remarks :
Made by: LING
60
Date: 05/04/18
55
50
45
40
Deviator Stress kPa
Approved by: HS
35
30
25
y
20
15
ar
Date: 05/04/18
in
10
im
0
0 2 4 6 8 10 12 14 16 18 20
el
Checked by: MCF
Axial Strain %
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Undrained Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Shear Strength Strain Type
m mm mm % kN/m3 kPa kPa % %
S2 1.90 72 150 114.5 14.1 60 7.6 1.8 9.7 B
0 0
Plot: UU_Processing_Template_Rev.10_30 May 16_Issue 9
0 0
0 0
Date: 05/04/18
0 0
BH1 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Onshore UCS
Moderately cemented weak very dark grey
PQ33 18.55 Undisturbed 31.8 18.3 13.9 2.53 96.56 0.833
SILTSTONE
Slightly cemented very weak dark grey
PQ39 23.25 Undisturbed 54.5 16.0 10.3 2.49 95.32 1.424
SILTSTONE
Moderately cemented weak yellowish grey
PQ61 43.20 Undisturbed 29.5 18.4 14.2 2.50 96.27 0.766
SILTSTONE
Approved by: HS
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Remarks :
Made by: LING
2400
Date: 05/04/18
2200
2000
1800
1600
Deviator Stress kPa
Approved by: HS
1400
1200
1000
y
800
600
ar
Date: 05/04/18
in
400
im
200
0
0 1 2 3 4 5 6 7 8 9 10
el
Checked by: MCF
Axial Strain %
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Compressive Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Strength (qu) Strain Type
m mm mm % kN/m3 kPa kPa % %
PQ33 18.55 82 164 31.8 18.3 - 1756 0.8 1.4 B
PQ39 23.25 83 166 54.5 16.0 - 785 0.5 1.3 C
Plot: UCS_Processing_Template_Rev.10_30 May 16_Issue 9
0 0
BH1 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Computed Dry Unit 3
Sample Depth Dry Unit Weight, (kN/m ) Relative Density, Dr
Weight, kN/m3
d Maximum, d(max) Minimum, d(min)
Date: 05/04/18
No. (m) %
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Notes: 1) Maximum and minimum dry unit weights were performed in general accordance
to ASTM D4253-16 and ASTM D4254-16 respectively.
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Made by: LING
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
S6 3.65 NR
S19 10.25 NR
Approved by: HS
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Notes :
1. *NR – No reaction with hydrochloric acid (HCL)
2. HCL concentration is 3N
Made by: LING
y
ar
Date: 05/04/18
in
im
el
Checked by: HS
Pr
Date: 05/04/18
Made by: ASH
2.30
Project No. 17218S
Date: 05/04/18
1.82
Height, mm 20.0
y
1.74 Diameter, mm 50.5
Wet weight, gm 55.43
1.66
ar
INITIAL
Dry weight, gm 28.98
Water Content, % 91.3
1.58 Unit Wet Weight, kN/m 3
13.6
in
Date: 05/04/18
3
Unit Dry Weight, kN/m 7.1
1.50 Deg. of Saturation, % 94.9
1 10 100 1000
im
3
Unit Wet Weight, kN/m 14.7
40 Unit Dry Weight, kN/m 3
8.5
Pr
30
Cv,m2/yr
20
10
0
1 10 100 1000
Date: 05/04/18
Project : 17218S
Client - Location : FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Boring No : BH1
Sample No : S2
Depth , m : 1.75
Soil Description : Very dark brown peaty CLAY with few sand
Date: 05/04/18
y
Weight of Wet Soil, gm = 55.43 49.70
Height of Sample, cm = 2.00 1.661
Diameter of Sample, cm
Volume of Sample, cm3
Unit Wet Weight, kN/m3
Unit Dry Weight, kN/m3
=
=
=
=
5.05
40.06
13.6
7.1
5.05
33.26
14.7
8.5
ar
in
Date: 05/04/18
0.84
Project No. 17218S
Date: 05/04/18
0.72
Height, mm 20.0
y
0.70 Diameter, mm 50.5
Wet weight, gm 72.31
0.68
ar
INITIAL
Dry weight, gm 54.57
Water Content, % 32.5
0.66 Unit Wet Weight, kN/m 3
17.7
in
Date: 05/04/18
3
Unit Dry Weight, kN/m 13.4
0.64 Deg. of Saturation, % 97.8
10 100 1000 10000 100000
im
3
Unit Wet Weight, kN/m 18.8
160 Unit Dry Weight, kN/m 3
14.4
Pr
120
Cv,m2/yr
80
40
0
10 100 1000 10000 100000
Date: 05/04/18
Project : 17218S
Client - Location : FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Boring No : BH1
Sample No : S13
Depth , m : 7.40
Soil Description : Olive brown sandy SILT
Date: 05/04/18
y
Weight of Wet Soil, gm = 72.31 71.08
Height of Sample, cm = 2.00 1.853
Diameter of Sample, cm
Volume of Sample, cm3
Unit Wet Weight, kN/m3
Unit Dry Weight, kN/m3
=
=
=
=
5.05
40.06
17.7
13.4
5.05
37.12
18.8
14.4
ar
in
Date: 05/04/18
10 6400 7954 561 1.445 0.696 0.766 51.527 48.950 0.007 0.109
11 9600 7456 624 1.880 0.656 0.766 49.167 46.708 0.007 0.106
12 3200 7602 537 1.821 0.661
13 400 7848 412 1.700 0.673
14 50 8075 319 1.566 0.685
13 12 8238 255 1.467 0.694
Made by: ASH
y
ar
Checked By: HS
in
im
Date: 26/03/18
el
Pr
Made By: LING
GeODin/SOTR with UU+PSD.GLO/2018-03-26 4:49:52 PM
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 26/03/18
in
10
0
im
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH2 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Sample Unit Weight [kN/m³] Atterberg Limits c u [kPa]
No. Depth w 1 2 d d s Carb. Org. wp wL Ip Fines PP TV LV UU
min. max. Cont. Cont.
S5
6.85 14
y
29.20 2.44 30
S51 32.60
33.00
44.0
40.8
16.9
17.2
16.4
16.6
2.52
ar 70
451
Checked By: HS
el
Pr
Made By: SD
GeODin/SOTR with UU+PSD.GLO/2018-03-29 2:57:16 PM
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
in
Date: 29/03/18
10
0
im
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH3 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Onshore UU
Date: 03/04/18
S5 2.90 Undisturbed 96.0 14.3 7.3 2.58 96.85 2.557 Soft black organic CLAY
S51 33.00 Undisturbed 40.8 16.6 11.8 2.52 89.86 1.144 Very hard brown and brownish grey SILT
Approved by: HS
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Date: 03/04/18
Remarks :
Made by: SD
60
55
Date: 29/03/18
50
45
40
Deviator Stress kPa
Approved by: HS
35
30
25
y
20
15
ar
in
Date: 29/03/18
10
im
0
0 2 4 6 8 10 12 14 16 18 20
el
Axial Strain %
Checked by: MCF
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Undrained Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Shear Strength Strain Type
m mm mm % kN/m3 kPa kPa % %
S5 2.90 72 150 96.0 14.3 45 15 3.6 15.0 A
0 0
Plot: UU_Processing_Template_Rev.10_30 May 16_Issue 9
0 0
0 0
Date: 29/03/18
0 0
BH3 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
960
880
Date: 29/03/18
800
720
640
Deviator Stress kPa
Approved by: HS
560
480
400
y
320
240
ar
in
Date: 29/03/18
160
im
80
0
0 2 4 6 8 10 12 14 16 18 20
el
Axial Strain %
Checked by: MCF
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Undrained Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Shear Strength Strain Type
m mm mm % kN/m3 kPa kPa % %
S51 33.00 72 150 40.8 16.6 271 451 3.4 15.0 A
0 0
Plot: UU_Processing_Template_Rev.10_30 May 16_Issue 9
0 0
0 0
Date: 29/03/18
0 0
BH3 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Onshore UCS
Date: 03/04/18
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Date: 03/04/18
Remarks :
Made by: SD
480
440
Date: 29/03/18
400
360
320
Deviator Stress kPa
Approved by: HS
280
240
200
y
160
120
ar
in
Date: 29/03/18
80
im
40
0
0 1 2 3 4 5 6 7 8 9 10
el
Axial Strain %
Checked by: MCF
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Compressive Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Strength (qu) Strain Type
m mm mm % kN/m3 kPa kPa % %
PQ39 23.40 83 170 73.9 14.7 - 365 0.9 1.2 D
0 0
Plot: UCS_Processing_Template_Rev.10_30 May 16_Issue 9
0 0
0 0
Date: 29/03/18
0 0
BH3 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Sample Unit Weight [kN/m³] Atterberg Limits c u [kPa]
No. Depth w 1 2 d d s Carb. Org. wp wL Ip Fines PP TV LV UU
min. max. Cont. Cont.
y
ar
Checked By: HS
in
im
Date: 23/03/18
el
Pr
Made By: LING
GeODin/SOTR with UU+PSD.GLO/2018-03-23 8:55:37 AM
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 23/03/18
in
10
0
im
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH5 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Sample Unit Weight [kN/m³] Atterberg Limits c u [kPa]
No. Depth w 1 2 d d s Carb. Org. wp wL Ip Fines PP TV LV UU
min. max. Cont. Cont.
y
PQ73 34.90 34.8 17.9 2.55 65
S79
PQ85 42.60
39.30 35.0
25.0
17.8
19.0
17.9 2.54
2.52
ar 47
31
Checked By: HS
in
PQ87 44.85 31.3 18.4 2.58 30
im
Date: 05/04/18
el
Pr
Made By: SD
GeODin/SOTR with UU+PSD.GLO/2018-04-05 10:12:58 AM
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
in
Date: 03/04/18
10
0
im
S8 3.60 Poorly-graded medium to coarse SAND, with silt (SP-SM) 52 4.14 27.29
S20 8.30 SILT, with sand 39
S37 13.05 Silty fine to medium SAND 46
SPT42 15.10 Silty fine to coarse SAND, with gravel 29
PQ53 23.35 Silty fine to medium SAND 49
SPT60 28.60 Silty fine to medium SAND 56
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH6 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
in
Date: 03/04/18
10
0
im
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH6 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Notes: 1) Maximum and minimum dry unit weights were performed in general accordance
to ASTM D4253-16 and ASTM D4254-16 respectively.
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Made by: SD
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
S8 3.60 NR
S20 8.30 NR
Approved by: HS
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Date: 03/04/18
Notes :
1. *NR – No reaction with hydrochloric acid (HCL)
2. HCL concentration is 3N
Made by: SD
y
ar
Date: 04/04/18
in
im
el
Checked by: HS
Pr
Date: 04/04/18
Made by: ASH
1.80
Project No. 17218S
Boring No. BH6
1.72
Date: 04/04/18
1.32
Height, mm 20.0
y
1.24 Diameter, mm 50.5
Wet weight, gm 58.10
1.16
ar
INITIAL
Dry weight, gm 35.04
Water Content, % 65.8
1.08 Unit Wet Weight, kN/m 3
14.2
in
Date: 04/04/18
3
Unit Dry Weight, kN/m 8.6
1.00 Deg. of Saturation, % 90.4
1 10 100 1000 10000
im
3
Unit Wet Weight, kN/m 16.0
Checked by: SD
120
Cv,m2/yr
80
40
0
1 10 100 1000 10000
Date: 04/04/18
Project : 17218S
Client - Location : FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Boring No : BH6
Sample No : S8
Depth , m : 3.75
Soil Description : Black and very dark brown sandy peaty CLAY with traces of gravel
Date: 04/04/18
y
Weight of Wet Soil, gm = 58.10 51.82
Height of Sample, cm = 2.00 1.587
Diameter of Sample, cm
Volume of Sample, cm3
Unit Wet Weight, kN/m3
Unit Dry Weight, kN/m3
=
=
=
=
5.05
40.06
14.2
8.6
5.05
31.78
16.0
10.8
ar
in
Date: 04/04/18
10 1600 6274 417 3.300 1.301 0.694 47.270 44.907 0.059 0.826
11 3200 5098 493 4.400 1.149 0.694 42.092 39.988 0.041 0.512
12 400 5180 424 4.387 1.151
13 50 5327 349 4.315 1.161
14 3 5565 295 4.131 1.186
Made by: ASH
0.96
Project No. 17218S
Boring No. BH6
0.92
Date: 04/04/18
0.72
Height, mm 20.0
y
0.68 Diameter, mm 50.5
Wet weight, gm 71.79
0.64
ar
INITIAL
Dry weight, gm 54.02
Water Content, % 32.9
0.60 Unit Wet Weight, kN/m 3
17.6
in
Date: 04/04/18
3
Unit Dry Weight, kN/m 13.2
0.56 Deg. of Saturation, % 95.4
10 100 1000 10000 100000
im
3
Unit Wet Weight, kN/m 19.0
Checked by: SD
120
Cv,m2/yr
80
40
0
10 100 1000 10000 100000
Date: 04/04/18
Project : 17218S
Client - Location : FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Boring No : BH6
Sample No : S20
Depth , m : 8.40
Soil Description : Dark grey SILT with sand, and traces gravel
Date: 04/04/18
y
Weight of Wet Soil, gm = 71.79 70.05
Height of Sample, cm = 2.00 1.806
Diameter of Sample, cm
Volume of Sample, cm3
Unit Wet Weight, kN/m3
Unit Dry Weight, kN/m3
=
=
=
=
5.05
40.06
17.6
13.2
5.05
36.17
19.0
14.7
ar
in
Date: 04/04/18
10 6400 7197 646 2.134 0.669 2.640 14.047 13.345 0.011 0.046
11 9600 6660 712 2.605 0.625 2.848 12.224 11.613 0.008 0.030
12 3200 6837 637 2.503 0.635
13 400 7133 539 2.305 0.653
14 25 7528 429 2.020 0.680
15 12 7622 412 1.943 0.687
Made by: ASH
1.85 24
5.80 0 79
y
PQ47 19.00 34.1 17.8 2.51 32
PQ55 24.90
PQ61 29.45
59.1
50.4
15.9
16.1
2.57
2.44 ar 40
55
Checked By: HS
el
Pr
Made By: SD
GeODin/SOTR with UU+PSD.GLO/2018-04-05 9:25:20 AM
140
120
CH or OH
Date: 03/04/18
100
U - LINE
PLASTICITY INDEX (I P)
60
CL or OL
Approved by: HS
MH or OH
40
20
y
ML or OL
CL - ML
0
0 40 80
ar 120
LIQUID LIMIT (wL )
160 200 240
in
Sample No. Depth (m) wL wP IP Fines Remarks
Date: 03/04/18
Pr
Note : All the above Liquid Limit tests was performed in accordance to Method B (One-Point) of ASTM D 4318-10
Date: 03/04/18
PLASTICITY CHART
ASTM D 2487 - 11 & D 4318 - 10
BH9 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
in
Date: 03/04/18
10
0
im
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH9 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
in
Date: 03/04/18
10
0
im
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH9 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Onshore UU
Date: 03/04/18
S2 1.75 Undisturbed 106.6 12.6 6.1 2.43 86.22 3.004 Very soft dark brown peaty CLAY
Approved by: HS
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Date: 03/04/18
Remarks :
Made by: SD
24
22
Date: 03/04/18
20
18
16
Deviator Stress kPa
Approved by: HS
14
12
10
y
8
6
ar
in
Date: 03/04/18
4
im
0
0 2 4 6 8 10 12 14 16 18 20
el
Axial Strain %
Checked by: MCF
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Undrained Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Shear Strength Strain Type
m mm mm % kN/m3 kPa kPa % %
S2 1.75 71 150 106.6 12.6 15 6.9 1.8 10.0 B
0 0
Plot: UU_Processing_Template_Rev.10_30 May 16_Issue 9
0 0
0 0
Date: 03/04/18
0 0
BH9 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
S14 5.70 NR
S29 10.45 NR
Approved by: HS
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Date: 03/04/18
Notes :
1. *NR – No reaction with hydrochloric acid (HCL)
2. HCL concentration is 3N
Made by: SD
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Notes: 1) Maximum and minimum dry unit weights were performed in general accordance
to ASTM D4253-16 and ASTM D4254-16 respectively.
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Made by: SD
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Depth
Sample No. pH In Distilled Water pH In CaCL2 (0.01M)
[m]
Date: 03/04/18
y
ar
in
Date: 03/04/18
im
el
Checked by: MCF
Pr
Date: 03/04/18
Made by: SD
y
ar
Date: 04/04/18
in
im
el
Checked by: HS
Pr
Date: 04/04/18
Made by: ASH
5.80
Project No. 17218S
Boring No. BH9
5.56
Date: 04/04/18
Sample No. S2
Pc'= 11 kPa
5.32 Depth of Sample, m 1.80
Initial Void Ratio (eo) 5.417
4.36
Height, mm 20.0
4.12
y
Diameter, mm 50.5
Wet weight, gm 47.15
3.88
ar
INITIAL
Dry weight, gm 15.17
Water Content, % 210.8
3.64 3
Unit Wet Weight, kN/m 11.5
in
Date: 04/04/18
3
Unit Dry Weight, kN/m 3.7
3.40
Deg. of Saturation, % 94.6
1 10 100 1000
im
3
Unit Wet Weight, kN/m 12.7
Checked by: SD
30
Cv,m2/yr
20
10
0
1 10 100 1000
Date: 04/04/18
Project : 17218S
Client - Location : FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Boring No : BH9
Sample No : S2
Depth , m : 1.80
Soil Description : Very soft dark brown peaty CLAY with sand
Date: 04/04/18
y
Weight of Wet Soil, gm = 47.15 42.58
Height of Sample, cm = 2.00 1.645
Diameter of Sample, cm
Volume of Sample, cm3
Unit Wet Weight, kN/m3
Unit Dry Weight, kN/m3
=
=
=
=
5.05
40.06
11.5
3.7
5.05
32.94
12.7
4.5
ar
in
Date: 04/04/18
1.00
Project No. 17218S
Boring No. BH9
0.96
Date: 04/04/18
0.76
Height, mm 20.0
y
0.72 Diameter, mm 50.5
Wet weight, gm 72.85
0.68
ar
INITIAL
Dry weight, gm 53.84
Water Content, % 35.3
0.64 Unit Wet Weight, kN/m 3
17.8
in
Date: 04/04/18
3
Unit Dry Weight, kN/m 13.2
0.60 Deg. of Saturation, % 98.6
10 100 1000 10000 100000
im
3
Unit Wet Weight, kN/m 19.0
Checked by: SD
720
Cv,m2/yr
480
240
0
10 100 1000 10000 100000
Date: 04/04/18
Project : 17218S
Client - Location : FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
Boring No : BH9
Sample No : S29
Depth , m : 10.35
Soil Description : Dark grey SILT with clay pockets and traces of sand
Date: 04/04/18
y
Weight of Wet Soil, gm = 72.85 69.39
Height of Sample, cm = 2.00 1.784
Diameter of Sample, cm
Volume of Sample, cm3
Unit Wet Weight, kN/m3
Unit Dry Weight, kN/m3
=
=
=
=
5.05
40.06
17.8
13.2
5.05
35.74
19.0
14.8
ar
in
Date: 04/04/18
10 6400 7444 545 1.978 0.736 0.292 128.605 122.175 0.010 0.369
11 9600 6915 631 2.421 0.694 0.378 93.884 89.190 0.008 0.213
12 1600 7116 450 2.401 0.696
13 200 7330 322 2.315 0.704
14 12 7588 222 2.157 0.719
Made by: ASH
y
PQ64 38.70 26.9 18.6 18.5
el
Pr
Made By: LING
GeODin/SOTR with UU+PSD.GLO/2018-04-05 5:19:34 PM
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 05/04/18
in
10
0
im
S5 2.80 Well-graded fine to coarse SAND, with silt (SW-SM) 47 2.14 6.06
S8 3.70 Silty fine to coarse SAND 46
S17 6.75 Silty fine SAND 39
S24 8.65 Poorly-graded fine to coarse SAND, with silt (SP-SM) 64 0.50 10.60
PQ29 11.55 Silty fine to medium SAND 39
PQ36 16.15 Silty fine to medium SAND 34
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH10 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 05/04/18
in
10
0
im
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH10 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Onshore UCS
Slightly cemented very weak dark grey
PQ54 29.50 Undisturbed 32.3 18.5 14.0 2.50 101.71 0.794
SILTSTONE
Moderately cemented weak brownish grey
PQ69 43.40 Undisturbed 36.2 17.8 13.1 2.48 98.78 0.909
SILTSTONE
Approved by: HS
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Remarks :
Made by: LING
480
Date: 05/04/18
440
400
360
320
Deviator Stress kPa
Approved by: HS
280
240
200
y
160
120
ar
Date: 05/04/18
in
80
im
40
0
0 1 2 3 4 5 6 7 8 9 10
el
Checked by: MCF
Axial Strain %
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Compressive Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Strength (qu) Strain Type
m mm mm % kN/m3 kPa kPa % %
PQ54 29.50 82 164 32.3 18.5 - 207 0.3 0.8 D
0 0 -
Plot: UCS_Processing_Template_Rev.10_30 May 16_Issue 9
0 0 -
0 0
Date: 05/04/18
0 0
BH10 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
2400
Date: 05/04/18
2200
2000
1800
1600
Deviator Stress kPa
Approved by: HS
1400
1200
1000
y
800
600
ar
Date: 05/04/18
in
400
im
200
0
0 1 2 3 4 5 6 7 8 9 10
el
Checked by: MCF
Axial Strain %
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Compressive Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Strength (qu) Strain Type
m mm mm % kN/m3 kPa kPa % %
PQ69 43.40 83 166 36.2 17.8 - 2258 1.2 1.5 D
0 0 -
Plot: UCS_Processing_Template_Rev.10_30 May 16_Issue 9
0 0 -
0 0
Date: 05/04/18
0 0
BH10 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
S17 6.75 NR
PQ48 24.90 NR
Approved by: HS
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Notes :
1. *NR – No reaction with hydrochloric acid (HCL)
2. HCL concentration is 3N
Made by: LING
Depth
Sample No. pH In Distilled Water pH In CaCL2 (0.01M)
[m]
Date: 05/04/18
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Made by: LING
24.85 2.55
y
37.45 31.0 18.3 18.6
PQ68 38.85
38.90
37.3 17.7
2.58
ar 16
Checked By: HS
el
Pr
Made By: LING
GeODin/SOTR with UU+PSD.GLO/2018-04-05 5:15:55 PM
140
120
CH or OH
Date: 05/04/18
100
U - LINE
PLASTICITY INDEX (IP )
60
Approved by: HS
CL or OL
MH or OH
40
20
y
ML or OL
CL - ML
0
0 40 80
ar 120
LIQUID LIMIT (wL )
160 200 240
Date: 05/04/18
in
Sample No. Depth (m) wL wP IP Fines Remarks
Pr
Note : All the above Liquid Limit tests was performed in accordance to Method B (One-Point) of ASTM D 4318-10
Date: 05/04/18
PLASTICITY CHART
ASTM D 2487 - 11 & D 4318 - 10
BH16 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 05/04/18
in
10
0
im
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH16 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
100
90
80
PERCENT FINER BY WEIGHT
70
Approved by: HS
60
50
40
y
30
20 ar
Date: 05/04/18
in
10
0
im
Sample No. Depth(m) D100 D60 D30 D10 %Gravel %Sand %Silt/Clay
GRADATION CURVES
ASTM D 2487 - 11 & D 422 - 63 (2007)
BH16 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
Onshore UCS
Moderately cemented weak very dark grey
PQ66 37.45 Undisturbed 31.0 18.6 14.2 2.54 98.69 0.798
and brownish grey SILTSTONE
Approved by: HS
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Remarks :
Made by: LING
3600
Date: 05/04/18
3300
3000
2700
2400
Deviator Stress kPa
Approved by: HS
2100
1800
1500
y
1200
900
ar
Date: 05/04/18
in
600
im
300
0
0 1 2 3 4 5 6 7 8 9 10
el
Checked by: MCF
Axial Strain %
Pr
Onshore Laboratory
Curve Sample Depth Corrected Measured Water Unit Confining Compressive Epsilon50 Failure Failure
No. Diameter Height Content Weight Pressure Strength (qu) Strain Type
m mm mm % kN/m3 kPa kPa % %
PQ66 37.45 83 166 31.0 18.6 - 3477 0.8 1.0 D
0 0 -
Plot: UCS_Processing_Template_Rev.10_30 May 16_Issue 9
0 0 -
0 0 -
Date: 05/04/18
0 0
BH16 Location
FGEN - Batangas LNG Receiving and Regasification Terminal Batangas City, Philippines
This report shall not be reproduced except in full, without the written approval of the laboratory.
The results reported herein have been performed in accordance with the terms of accreditation
under the Singapore Accreditation Council.
S14 5.70 NR
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Notes :
1. *NR – No reaction with hydrochloric acid (HCL)
2. HCL concentration is 3N
Made by: LING
Depth
Sample No. pH In Distilled Water pH In CaCL2 (0.01M)
[m]
Date: 05/04/18
y
ar
Date: 05/04/18
in
im
el
Checked by: MCF
Pr
Date: 05/04/18
Made by: LING