Professional Documents
Culture Documents
Jumper Cable Here For Circuit Bent Bass (Broken Filter IC) : Cut These
Jumper Cable Here For Circuit Bent Bass (Broken Filter IC) : Cut These
Jumper Cable Here For Circuit Bent Bass (Broken Filter IC) : Cut These
The snre has 2 tones which you INDIVIDUAL OUTPUTS These are tough to solder to:
R144 (orange circle) botom side
fade between with the Tune knob. Solder to the center lugs of I reccomend using the Volume Pots instead
feeds the filter. Insert audio signal
R92 and R115 (green circles) change the high and each volume pot for that respctive HATS PERC SNARE KICK
here, and disconnect synth input?
low pitch respectively. Bridge with potentiometer? instruments output (Blue circles below)
Mix noise in at this point?
1K resistor
1K resistor