Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

8-Port Antenna

4 x (1710-2690) MHz
4WC-11M Embedded Manual Override Kit
4H / 1.47 m 4.3-10 Connector

Electrical Data (BASTA)

4 x (1710-2690)
Frequency(MHz)
1710-1880 1920-2200 2200-2490 2490-2690
Gain Y1/Y2/Y3/Y4 dBi 17.0±0.3 17.5±0.5 17.7±0.6 18.0±0.6
Polarization ° ±45
Horizontal Pattern
3dB Beamwidth ° 68±7 64±5 60±5 59±5
Front to Back Ratio @
180°±30° 25

Cross-Polar Boresight 0° 17 17 17 17
Ratio Sector ±60° 8 8 8 8
Vertical Pattern
3dB Beamwidth 6.8±0.6 6.2±0.6 5.4±0.6 5.1±0.5
°
Electrical Downtilt 2-12
1st Upper sidelobe
dB 17
Suppression
RF Parameters
VSWR 1.5:1
Port Isolation dB 28
Band Isolation dB 28
3rd Order PIM dBc -150 @ 2 x 43 dBm
Impedance Ω 50
Power Handling W 300

Mechanical Data (BASTA)

Input Connectors 8 x 4.3-10 Female


Connector Position Bottom
Lightning Protection DC Ground
Radiator Material Aluminum Alloy
Reflector Material Aluminum Alloy
Radome Material Fiberglass
Antenna Weight 24±2 kg 52.9±4.4 lb
Antenna Dimensions (H x W x D) 1470 x 480 x 135 mm 57.9 x 18.9 x 5.3 in
Maximum Wind Velocity 241 km/h 150 mph
Max. Wind Load @150 km/h (Front/Rear/Side) 725 / 813 / 71N 163 / 183/ 16 lbf
Mast Diameter Supported 50 - 110 mm 2.0 - 4.3 in
Relative Humidity 5% - 95%
Operating Temperature Range -40 ~ +70 °C -40 ~ +158 °F

Rosenberger Hochfrequenztechnik GmbH & Co. KG Rosenberger Asia Pacific Co., Ltd. V 0.1
www.rosenberger.com www.rosenbergerap.com 13/01/2020
1/2
8-Port Antenna
4 x (1710-2690) MHz
4WC-11M Embedded Manual Override Kit
4H / 1.47 m 4.3-10 Connector

Layout

Array Connector Frequency (MHz) Sub Unit # RET Type RET Serial*
Y1 1-2 1710-2690 1 / /
Y2 3-4 1710-2690 2 / /
Y3 5-6 1710-2690 3 / /
Y4 7-8 1710-2690 4 / /
R2
*Remark: XX – Year, YY – Week , xxxxx – Serial Number
R2
Pattern
1710-2690

Accessories(Azimuth Adjustable)
Item Model Weight (kg) Mechanical Tilt Range (°)
Mounting Kit 85-1 4.5 0-10

Compliance
— Our quality assurance system and our environmental management system apply to the entire company
and are certified according to EN ISO 9001, EN ISO 14001 and OHSAS 18001
— Our products are compliant to the EU Directive RoHS2.0(2011/65/EU& 2015/863/EU) as well as to other environmentally relevant
regulations (e.g. REACH)

While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe
existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. For environmental information, please refer to www.rosenbergerap.com/content/Environment.aspx

Rosenberger Hochfrequenztechnik GmbH & Co. KG Rosenberger Asia Pacific Co., Ltd. V 0.1
www.rosenberger.com www.rosenbergerap.com 13/01/2020
2/2

You might also like