Wrong Answer Summary

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Wrong answer summary

Installation: Fleet Management Limited MDB CES version: CES 6.0.5


Name: Sourav Dey Test date: 23.06.2021
User ID: 71941 Test type: Detailed
Time used: 41
Nationality: India Function area: Electrical, electronic and control
engineering
Academy: Subject: EE - Operational Level
Batch:
Show only wrong answers with negative score: No
Questions not answered, not listed below: 0

Question asked (TpP#35b#):


A ships 3 - phase a.c. electrical supply system has 440 V and 220 V sections. The effect of a single short circuit fault to earth on a 220 V
line will cause which of the following earth lamp (under test mode) indications:
Selected answer (score 0):
In 440 V section: All lamps equally bright. In 220 V section: One lamp dim.
Correct answer:
In 440 V section: all lamps equally bright. In 220 V section: Two lamps bright one lamp dark.

Question asked (24pM1Gho):


The speed of ship's generator is regulated by the governor. A 10% reduction in generator speed occurs due to a faulty governor. The likely
consequence for all motors powered from this generator is to:
Selected answer (score 0):
Don't know
Correct answer:
Reduce motor speed by about 10%

Question asked (1xXxlhe9):


What function is this operational amplifier circuit performing?
Selected answer (score 0):
Differentiator
Correct answer:
Inverting amplifier

Question asked (49jnVyfo):


This is the graphical symbol and truth table for a logic gate. Which gate?
Selected answer (score 0):
OR
Correct answer:
NOR

Question asked (pEGbXCSD):


Which component does this graphical symbol illustrate?
Selected answer (score 0):
Pressure instument, installed locally
Correct answer:
Pressure indicator, installed on panel/console

Page 1/3
Wrong answer summary

Question asked (im5higAl):


What type of component does this graphical symbol illustrate?
Selected answer (score 0):
Flow controller
Correct answer:
Pressure-reducing regulator.

Question asked (ytikovyj):


Thermocouples are often used for measuring temperatures. Which of the following descriptions explains the principle of operation of a
thermocouple?
Selected answer (score 0):
A resistance device that exhibits a positive coefficient of resistance with temperature.
Correct answer:
A junction between two dissimilar metals that generates a small voltage with temperature.

Question asked (oZ2gBp85):


Which type of temperature sensors are shown on the picture?
Selected answer (score 0):
Thermocouple sensors
Correct answer:
Resistance sensors

Question asked (6GKAftpO):


The physical size of a resistor is an indicator of a particular specification. What is it?
Selected answer (score 0):
Total resistance
Correct answer:
Power dissipation capability

Question asked (vMgw1icE):


The range of a transducer is 0-200 bar. The output signal is 4-20 mA. What is the span of the output signal?
Selected answer (score 0):
4 mA
Correct answer:
16 mA

Question asked (ZEJFY1hu):


In terms of electrical units, what does the abbreviation Hz stand for?
Selected answer (score 0):
Revolution per minute
Correct answer:
Frequency in Cycles per second

Page 2/3
Wrong answer summary

Question asked (0nB9EoSx):


What is the function of a gyroscope?
Selected answer (score 0):
It is used to indicate the degree to which two generators are synchronized to each other
Correct answer:
It is used for north-seeking and meridian settling

Question asked (vOd7ByYm):


A digital transmission line is suffering from attenuation and is badly distorted. What is the corrective measure to be taken?
Selected answer (score 0):
Replace the controller with a new one
Correct answer:
Install repeaters

Question asked (IdP1jo6z):


Which of the following is not a colour transmission standard for TV?
Selected answer (score 0):
SECAM
Correct answer:
ANSI

Page 3/3

You might also like