Material Safety Data Sheet BSU-11C: 1. Chemical Product and Company Identification

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Health 1

MATERIAL SAFETY DATA SHEET Flammability 3


BSU-11C Reactivity 1
Personal Protection G

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

SUPPLIER: USA

SERVICES COMPANY: PT Bukitapit Bumi Persada


Jln Margasatwa no 45 Jakarta Selatan 13550
Telp : 021-78838142
Fax : 021-78837905
PRODUCT NAME: BSU-11C
PRODUCT USE/CLASS: Cationic Surfactant

2. COMPOSITION / INFORMATION ON INGREDIENTS

Chemical mixture as quaternary Ammonium Compound in Isopropyl

3. HAZARD IDENTIFICATION

THERESHOLD LIMIT VALUE : 400 ppm


Effects of overexposure :
Acute : Eye : Irritating may cause injury to eye tissue
Skin : Irritating. Frequent and prolonged contact may irritated dermatitis
Inhalation : : High vapor concentrations are irritating to the eyes and the respiratory tract
Ingestion : Low order of toxicity and may cause injury to digestive
CHRONIC :
Eye : Immediately flush eyes with large amounts of water, for at least 15 min. Get prompt
medical attention.
Skin. : Immediately flush eyes with large amounts of water, Use soap if available.
Remove contaminated clothing.
Including shoes, after flushing has begun.
Get prompt medical attention.
Inhalation: Using proper respiratory protection, immediately remove victim from exposure.
Ingestion: Do not induce vomiting. If individual is conscious, give milk or water to dilute stomach
content. Keep warm and quiet.

4. FIRST AID MEASURES

Step to be taken in case material is released or spilled :


LAND .
Prevent additional discharge of material if safe to do so without hazard.
MATERIAL SAFETY DATA SHEET
BSU-11C

For small spills implement clean up procedures, if in public are, advice


authorities. Prevent liquid from entering sewer, watercourses or low area.
Contains spilled liquid with sand and earth. Recover by pumping or with a
suitable absorbent.
WATER
Prevent additional discharge of material if possible to do so without hazard.
Advice authorities.
WASTE DISPOSAL (Insure compormity with local disposal regulation):
Consult an expert on disposal of recovered material and ensure comformity
to local regulation.
.
5. FIRE FIGHTING MEASURES
o
Flash point (method) : 29 C (SETA CC –ASTM D3278
IMCO HAZARD CLASS :-
Flammable Limits (% by vol.) : LEL – 20 UEL-12.0
Fire Extinguishing media : Extinguish preferentially with dry chemicals or alcohol type
foam. water spray may be ineffective as an extinguishing
agent.
Special fire fighting procedures : Use water spray to cool fire exposed surfaces and to protect
personnel.
Unusual fire and explosion Hazards: Respiratory protection required for fighting personnel.
Hazardous product of combustion : Smoke, fumes, carbon monoxide, carbon dioxide.

6. ACCIDENTIAL RELEASE MEASURES

Steps to be taken if materials is released or spilled


Collective for disposal.

7. HANDLING AND STORAGE

PRECUTION TO BE TAKEN IN HANDLING AND STORING


: Keep container closed when not in use. Container used for this material may be hazardous.
OTHER PRECAUTIONS: Keep away from heat, sparks and open flames.
MATERIAL SAFETY DATA SHEET
BSU-11C

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

RESPIRATORY PROTECTION : Use NIOSH/MSHA approved respiratory protection such as


air supplied
Mask if used in confined spaces or other poorly ventilation
areas.
VENTILATION : LOCAL EXHOUST.
Provide greater than 60 fpm hood or face velocity for confined
spaces
: MECHANICAL (General)
To provide ventilation equal to out door.
PROTECTIVE GLOVES : Chemically resistant gloves.
EYE PROTECTION : Chemically splash goggles.
OTHER PROTECTIVE EQUIPMENT : Usually not needed.

9. PHYSICAL AND CHEMICAL PROPERTIES

APPEREARANCE : Clear Liquid


Odor : Mild alcohol
o
Boiling point : 93 C (Solvent)
Specific gravity : 0.980-0.995
Vapor Density (Air=1) : >1
Solubility in water : Soluble
Evaporation Rate(n-Butyl acetate=1): 1.8
o
Vapor pressure : 60-70 mmHg @38 C
(% Volatile (by Volume) 60

10. STABILITY AND REACTIVITY DATA

STABILITY : Stable
Condition to avoid : None
Incompatible (materials to avoid for purpose of transport, handling & storage only ): Strong
oxidizing agents. Sulfuric acid, Isocyanides.
Hazardous decomp. products.: None

11. TOXICOLOGICAL INFORMATION

ACUTE TOXICOLOGICAL INFORMATION


MATERIAL SAFETY DATA SHEET
BSU-11C

No information currently available


SUB-ACUTE/SUB-CHRONIC TOXICOLOGICAL INFORMATION
No Information currently available
SIGNIFICANT DATA WITH POSSIBLE RELEVANCE TO HUMAN HEALTH
No information relevant to human health hazard evaluation is currently available
ADDITIONAL INFORMATION : No information currently available

12. ECOLOGICAL INFORMATION

No information currently available

13. DISPOSAL CONSIDERATION

WASTE DISPOSAL METHOD(S)


Incinerate in a furnace or otherwise dispose of in accordance appropriate
National and local regulations
.

14. TRANSPORTATION INFORMATION


TRANSPORT CLASIFICATION
ADR/RID : This product is not regulated by ADR
IMDG : This product is not regulated by IMDG
ICAO : This product is not regulated by ICAO

15. REGULATORY INFORMATION

According to EC-regulations this product is not classified or labeled.

16. OTHER INFORMATION

The information in this MSDS was obtained from sources which we believe are reliable. However
the information provided without any warranty express or implied, regarding its correctness. The
condition or methods of handling, storage, use or disposal of the product are beyond our control.
For this, we do not assume responsibility and expressly disclaim liability for loss, damage or
expenses out of or in any way connected with the handling, storage, use or disposal of the
product. This MSDS was prepared and is to be used only for this product.

You might also like