Professional Documents
Culture Documents
Rotary Damper Actuator: 2 Point and 3 Point Control With Potentiometer
Rotary Damper Actuator: 2 Point and 3 Point Control With Potentiometer
Product Features
■ Torque 8 Nm / 16 Nm / 24 Nm
■ Shaft dimensions
Ø 10 to 20 mm round / 10 to 16 mm square
■ Minimum shaft length 50 mm
Technical Specifications
NACA 1…(P) NACA 2…(P)
Torque 8 Nm / 16 Nm / 24 Nm 8 Nm / 16 Nm / 24 Nm
Damper Size 1.5 m / 3.0 m / 4.5 m
2 2 2
1.5 m2 / 3.0 m2 / 4.5 m2
Shaft dimensions Ø 10 to 20 mm round / 10 to 16 mm square Ø 10 to 20 mm round / 10 to 16 mm square
Power Supply AC/DC 24 V ± 10% AC 230 V ± 10%
Frequency 50 - 60 Hz 50 - 60 Hz
Control Signal 2 point and 3 point 2 point and 3 point
Feedback Potentiometer
- Resistance 1 kOhm, 10 kOhm, 135 Ohm 1 kOhm, 10 kOhm, 135 Ohm
- Tolerance ±10 % ±10 %
- Loading Capacity 1W 1W
- Linearity ±2 % ±2 %
- Residual Resistance max. 5 % on both sides max. 5 % on both sides
Power Consumption
- Operating 3.9 W 4.8 W
- End Position 0.4 W 1.2 W
For Wire Sizing 6.5 VA 6.5 VA
Protection Class III III II
Angle of Rotation 0°…90° (93° mechanical) 0°…90° (93° mechanical)
Angle of Limiting 0°…90° in 5° steps 0°…90° in 5° steps
Weight 1.2 Kg - 1.4 Kg 1.3 Kg - 1.5 Kg
Life Cycle 60’000 rotation 60’000 rotation
Sound Level 45 dB (A) 45 dB (A)
IP Protection IP 54 (dust protected & protected against splash water) IP 54 (dust protected & protected against splash water)
2/4
Ambient Humidity 5%…95% rH non condensing / EN 60730-1 5%…95% rH non condensing / EN 60730-1
Maintenance Maintenance free Maintenance free
Mode of Operation Type I / EN 60730-1 Type I / EN 60730-1
EMC CE according to 89 / 336 / EEC CE according to 89 / 336 / EEC
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products. www.nenutec.com
C
Rotary Damper Actuator
Standard 8 Nm / 16 Nm / 24 Nm
A N A M E W I T H Q U A L I T Y 2 Point and 3 Point Control with Potentiometer
11 12 13
plug J1/Jump.
BLU J1
J1 YEL 90º J1
0º
AC 24 V ±10% Jump
CW CCW
DC 24 V ±10%
N L1 AC 230 V ±10% N L1
1 2 3
90º 0º
YEL
Jump BLU Jump
2 Point 3 Point
11 12 13
P1 P2 P3
1 kOhm ±10%
10 kOhm ±10%
135 Ohm ±10%
2 Point
max.
3 Point
3/4
AC 24 V ±10%
DC 24 V ±10%
N L1 AC 230 V ±10%
D-225A.E-205/CW20-10
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products. www.nenutec.com
C
Rotary Damper Actuator
Standard 8 Nm / 16 Nm / 24 Nm
A N A M E W I T H Q U A L I T Y 2 Point and 3 Point Control with Potentiometer
Releasing the Adapter NACA 1/2…(P) Limiting Angle of Rotation NACA 1/2…(P)
0º
15º
5º 30
º
45
º
60
º
75º
90º
OEM Customised Version on Request
TELIMA offers you NENUTEC actuators in customised versions, e.g. with your own brand name, with colour-coordinated applications
and with your particular demand. Please contact us for further information.
Important Remark
Consult NENUTEC representatives for specific requirements and material selections for your intended application.
This actuator includes electrical and electronic components and may not be disposed as household garbage. Please consider the local valid legislation.
TELIMA AG
4/4
F: +41 55 224 40 69
E-Mail: info@telima.ch
Internet: www.nenutec.com
The performance specifications are nominal and conform to acceptable industry standards. NENUTEC shall not be liable for damages resulting from misapplication or misuse of its products. www.nenutec.com