Professional Documents
Culture Documents
ds511 Specification Sheet English
ds511 Specification Sheet English
ROCK SUPPORT
BOLTER
TECHNICAL SPECIFICATION
16 km/h (Horizontal)
Tramming speed Electric system
5 km/h (14%=1:7=8°)
*Voltage option 1 000 V (50 or 60 Hz) with Direct-On-
Gradeability / sideways Max. 15° / 5° Line starter
Fuel tank 150 liters * Electric cable Specification TS2-121
Ground fault and overcurrent VYK
2 x TJ60 Vertical (front) protection
Hydraulic jacks
2 x TJ75 Vertical (rear) Dewatering pump outlet 380 - 690 V (Max. 8 kW)
Centralized greasing points Specification 5-2110 Battery jump start Optional
Amber flashing light LED (24 V)
Hand held fire extinguisher 1 x 7.7 or 9 kg (type ABC)
Tramming alarm Standard
Operator’s safety cabin /
Colour scheme Sandvik canopy
Documentation 2 x Operator’s manual *Safety canopy FOPS (ISO 3449)
2 x Maintenance manual *Stainless steel cabin FOPS (ISO 3449)
2 x Technical manual (in English only) Cabin heating During tramming and drilling
2 x Parts manual (in English only)
1 x Toolman CD
Fire suppression system
Additional fire extinguisher 1 x 7.7 or 9 kg (type ABC)
OPTIONAL FEATURES AND PACKAGES Manual or automatic system Ansul, 6 nozzles
Fire suppression system Sandvik FS1000 (above 0°C)
Bolting head
*Bolt carousel capacity 10 rock bolts for square plate 120 mm Carrier
12 rock bolts for square plate 100 mm Reduced tramming speed 3 rd gear lockout
16 rock bolts for square plate 85 mm Tramming camera Rear and side
*High speed carrier (MB) TC8, incl. MB OM906LA, 170 kW,
Tier 3, Stage IIIA, with Spicer
Bolting option
T32 000 transmission
*Bolting alternatives GCR, WI, S, BCS, M, K
*High speed carrier (QSB) TC8, incl.QSB6.7, 164 kW, Tier 4i,
Automatic resin shooting ARI system
Stage IIIB, with Spicer T32 000
“In the hole” resin cartridges See spec. 8-610S
transmission.
injection system
*Foam filled tires 4 pcs
Basket boom SUB3iA/B
Fast filling systems Complete
FOPS safety canopy (optional)
Wheel chocks and holders 2 Sets
Screen handler Sandvik SB90RSH separate boom
Rod rack For 4 rods (N/A with bolt storage)
(Not compatible with basket boom)
Cement dust collector Above the mixer
Bolt storage On right side Extra Item
Bolting head oiler Recommended with P-system Spare rock drill
RD314
Spare wheel assembly
12.00-20 or foam-filled
Hydraulic system Special tools for rock drill
RD314
By pass Oil filter Documentation
Extra, Catbase, Link one manuals
Vacuum pump For hydraulic oil Package: Country specific
USC, AUS, EUR, SWE
options
Package: Harsh water
Instrumentation Basic (TS2-049)
Package: Anti-freezing
Bolting instrumentation SBI (Sandvik bolting instrumentation) Block heater for engine, heater for
Navigate with fan laser or tachometer hydraulic oil, water circuit flushing
iBOLT systematic bolting iSURE IV bolting with air, antifreeze adding in water
Access detector Mandatory in Europe (TS2-211) circuit.
DS 511
BH24 3 900 8 780 10 720 13 380 2 570
2 570
BH27 4 110 8 780 10 720 13 380
BH30 4 450 8 780 10 720 13 380 959
BH40 5 650 9 620 11 560 15 060 D
BH50 6 650 10 620 12 560 17 060 E
BH60 7 620 10 620 12 560 17 060 All dimensions in mm
TS2-160:02/ENG/METRIC © Sandvik Mining 2016 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
4 800
8 620
3 400
3 400 4 120
13 600
4 900
2 700
35° 750 3 200
750
All dimensions in mm
Sandvik Mining reserves the right to make changes to the information on this data sheet without prior notification to users. Please contact a Sandvik
representative for clarification on specifications and options.
MINING.SANDVIK.COM