Professional Documents
Culture Documents
Bear DHG-B50C1 Manual
Bear DHG-B50C1 Manual
Precautions
Please read the "Safety Precautions" carefully before use, and use it in the correct way to
avoid damage or danger caused by improper use. Please read the text of the instruction
manual after understanding the content of this part, and keep it properly after reading it so
that all users of this product can refer to it at any time.
1. Please make sure that the grounding of the socket is effective before using this product.
At the same time, please confirm that the input voltage is 220V~50Hz.
2. If the power cord is damaged, it must be replaced by professionals from the manufacturer,
its maintenance department or similar departments in order to avoid danger.
3. The machine must be supervised when it is working, and it cannot be moved at will. Please
pay attention to the location of the surrounding people to avoid accidental burns.
4. During use, if there is a problem, please unplug the power plug from the socket. It is
forbidden to pull or plug the plug with wet hands to avoid electric shock.
5. Before cleaning, unplug the power plug and let it cool down naturally. To avoid leakage,
do not immerse the plug or the machine in liquid or water.
6. Do not insert foreign objects such as metal into the heat dissipation hole or gap, otherwise
it may cause damage or electric shock.
7. When the product is working, a large amount of steam will be emitted from the steam
port, which may cause burns. Please be careful.
8. It is forbidden to use this product on an unstable or inclined table surface to avoid
accidents such as injury or fire caused by product dumping.
9. Do not use it on or near carpets and plastic stools that are not heat-resistant. Do not
place objects damaged by steam on top of this product.
10. This machine must be used with the matching connector.
11. This product is not suitable for children, mentally ill or inexperienced people to use or
play with this product.
12. When cleaning, do not allow liquid to flow into the product, and do not put the power
cord, plug, whole machine, etc. into the liquid to avoid danger.
13. The appliance cannot be operated with an external timer or an independent remote-
control system.
Instructions
1. Please clean it with a hot towel when using it for the first time.
2. Connect the plug to the power supply, please use the 220V~50Hz dedicated socket.
note:
Because the power is large, please use a socket separately.
Please keep the power cord away from fire and heat sources.
3. When using, adjust the firepower to a low level and preheat first (put in edible oil or
water before using, and then adjust the temperature).
note:
It is normal for the pot to emit smoke when it is preheated for the first time. It can be
used normally after the smoke is dispersed.
4. When the oil temperature or water temperature reaches the cooking requirement, start
cooking.
note:
Pour the amount of water or soup you need according to your circumstances. Don't
put too much, so as to avoid spilling after putting in the ingredients, there is a danger
of scalding.
5. Adjust the lever to the desired gear.
Off Low High
note:
When cooking hot pot: A large amount of steam will overflow after opening the lid,
please be careful with the steam to avoid scalding.
Frying cooking time: need to remove the lid, if you need to add water to the pot, cover
the lid after adding water.
6. After cooking, turn the lever to "off" and be sure to unplug the plug to avoid danger.
7. Please use a wooden spatula when you need to stir fry dishes.
note:
If you use a metal spatula to stir fry, the non-stick layer in the pan will fall off and the
pan will stick.