Professional Documents
Culture Documents
Job Safety Analysis Sheet: KOC Emergency-160 90030980 (PIL)
Job Safety Analysis Sheet: KOC Emergency-160 90030980 (PIL)
Job Description: Rebar bending, Cutting, Loading & Offloading, Rebar &
Form works, Concrete Pouring, Vehicle & Equipment Maintenance, Chemical
handling, Office maintenance JSA Ref. No. EF 1931-O&G-JSA01
Equipment’s: M crane, Bending & cutting machine, F, L Trailer , Boom Truck, (REV-0,22.02.2020)
Service Truck, Diesel Tanker, W, B, Skid loader, D.G, Pick-up
Personal Protective Equipment & Tools: Hard Hat, Safety Shoes, Safety Goggles/Face shield, Hand Gloves, Overall with
reflective stripes, Hand tools & Power tools
Sequence of
Potential Hazards Precautions
Basic Job Steps
Ensure that all electrical power tools used for cutting timber /
formwork is properly inspected, all safety devices / guards are
Rebar and Fire and Explosion operational and in place; the equipment is used in a safe
Shuttering works manner by an experienced operator.
All electrical cables, plugs, sockets, earthling is properly
inspected and fit for purpose.
Page 1 of 5
Ensure that rebar is correctly stored, segregated and
barricaded at all times.
Ensure that “off cuts” (rebar or timber) are not left underfoot
Exposure to Extreme to cause a hazard. Collect and dispose off in the waste skip.
Weather All rebar protrusions are properly capped, to avoid puncture
wounds, and where necessary identified with warning tape to
minimize trip or other hazards.
Formwork inadequately
Formwork correctly braced and supported to take concrete
supported to take the
load without collapsing.
pressure of concrete.
Page 2 of 5
Do not position the equipment close to the trench /
excavation, overhead power lines.
Ensure ground is stable and properly compacted as required for
Positioning of crane on
positioning of crane.
unstable ground
Ensure crane outriggers pad of adequate size and thickness.
Ensure 360 lifting radius of the crane are properly barricaded
with posted warning signs.
All worn lifting tools / tackles and those who don’t have 3rd
party certification must be removed from site.
Lifting tackles and sling
All lifting tools and tackles must be free from grease and oils.
failure during the
Ensure all lifting gears and shackles are inspected with
operation
necessary authorized 3rd party inspection certificates, good
condition and color coded.
Page 4 of 5
Awareness training on dangerous and poisonous animals
Biological hazards, animal
Do not feed stray animals / wild life. Ensure buddy system is
bites
implemented.
JSA Done By Controlling Team: MP-III, TEAM-XI
Name:
Permit Applicant /
Controlling Team /
KOC No. Signature:
Asset Owner
Page 5 of 5