Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

4 SHOW UNIT STUDIO

4.1 FLOOR FINISHES


A. To supply labour and material to install parquette floor. Material : WD/21
B. To supply labour and material to install homogenous tiles. Material : HT/21
C. To supply labour and material to install s/s inlay at floor finish transition. Material : MT/1

4.2 PARTITION WORKS AND WALL FINISHES


A. To supply and labour material to paint some wall at showunit. Material : PT/21
B. To supply and labour material to install mozaic tiles. Material CT/22
C. To supply and labour material to install bronze tinted mirror. Material : GL/31
D. To supply and labour material to install entrance opening's frame with copper plate in hairline
finish. Material : MT/3
E. To supply and labour material to install opening's frame in metal plate. Material : MT/2
F. To supply and labour material to install low partition with padded wall. Material : F/21
G. To supply and labour material to install decorative half rounded partition. Finishing the in duco
finish. Material: PT/1
H. Supply labour material to construct with all new 2 sided gypsum partition with 12mm gypsum
board & metal hollow and ready to receive wall finishes (w/ insulation)
I. Supply labour and material to install 50mm high deorative metal skirting in all decorative walls
where necessary or shown in all drawings. Material : MT/2
J. To supply and labour material to install fixed window at bedroom area over all size thk 8mm
with cutting sticker, H : 2330mm, B : 2050mm. Material : clear glass 8mm with aluminium frame
powder coated
K. To supply and labour material to install fixed window at bedroom area over all size thk 8mm
with cutting sticker, H : 2330mm, B : 625mm. Material : clear glass 8mm with aluminium frame
powder coated

4.3 CEILING FINISHES


A. To supply labour and materials to install flat gypsum ceiling. Material : 12mm gypsum jayaboard,
Finishing : ICI Dulux
B. To supply labour and materials to install cove ceiling. Material : 12 mm gypsum jayaboard,
Finishing : ICI Dulux, H : 200mm
C. To supply labour and materials to install cove ceiling. Material : 12 mm gypsum jayaboard,
Finishing : ICI Dulux, H : 300mm
D. To supply labour and materials to install flat gypsum ceiling. Material : 12mm gypsum jayaboard,
Finishing : ICI Dulux, L : 150mm
4.4 FIXED FURNITURES - MILLWORK
A. M21 - Kitchen Cabinet typ. 1
B. M22 - Wardrobe typ. 1
C. M23 - Bench
D. M24 - Vanity Cabinet typ. 1

4.5 LOOSE FURNITURES

A. LF21 - Bed type. 1

4.6 SIGNAGES & CUSTOM LIGHT FIXTURES


A. L21

4.7 OTHER WORKS

A. Supply and install wood blind ex. Onna


B. Supply and install accessories and dummy plant in Show Unit Studio
C. Install dummy sanitary (material supplied by owner) = Closet & shower spray
D. Install dummy sanitary (material supplied by owner) = Shower set
E. Install dummy sanitary (material supplied by owner) = Floor Drain
F. Install dummy sanitary (material supplied by owner) = Lavatory & faucet

COLLECTION

4 SHOW UNIT STUDIO

4.1 FLOOR FINISHES


4.2 PARTITION WORKS AND WALL FINISHES
4.3 CEILING FINISHES
4.4 FIXED FURNITURES - MILLWORK
4.5 LOOSE FURNITURES
4.6 SIGNAGES & CUSTOM LIGHT FIXTURES
4.7 OTHER WORKS

You might also like