This document summarizes an HSY-DT20 Lift Control set with Software that can manage access control for up to 20 floors using a single card reader. It distinguishes users' privileges to allow access to authorized floors and includes management functions like card+password login, time profiles, peripheral control, and emergency management. The system can also integrate with cabinet access control and connect to external devices via Wiegand and TCP/IP protocols. It supports 20,000 user cards with 100,000 event buffer and a standard version manages 20 floors while an extended board supports up to 40 floors.
This document summarizes an HSY-DT20 Lift Control set with Software that can manage access control for up to 20 floors using a single card reader. It distinguishes users' privileges to allow access to authorized floors and includes management functions like card+password login, time profiles, peripheral control, and emergency management. The system can also integrate with cabinet access control and connect to external devices via Wiegand and TCP/IP protocols. It supports 20,000 user cards with 100,000 event buffer and a standard version manages 20 floors while an extended board supports up to 40 floors.
This document summarizes an HSY-DT20 Lift Control set with Software that can manage access control for up to 20 floors using a single card reader. It distinguishes users' privileges to allow access to authorized floors and includes management functions like card+password login, time profiles, peripheral control, and emergency management. The system can also integrate with cabinet access control and connect to external devices via Wiegand and TCP/IP protocols. It supports 20,000 user cards with 100,000 event buffer and a standard version manages 20 floors while an extended board supports up to 40 floors.
Normal management of the Access Control are "One for One", that means one card reader control one door. Valid card can open the door, invalid card can not open. Bur we can found that in many fields, a "One for More Controllers" are needed.
One set working for 20 floors.
Example 1: Lift controller Management The Manage Function can start using: We usually have ten or more floors in one lift, but you just need one card reader. The system can distinguish the user's privilege, then take Card + Password them to the right floor. Time Profile If the user has multi-floor privilege, when swiping the card, he can Peripheral Control choose the floor he want to go this time, and he can not push other Privilege and time profile setting (enable some one to open during a floor buttons. specified time). The validity of card setting If the users are the security and administrator, they can go to any floor Emergency Management (It turns into safe mode while power failure they want according to the privilege settings. or malfunction situation)
Example 2: Cabinet Access Control
Specifications: It can combine with the Adroitor software to manage this. User Card: 20,000 When you swiping card, the appoint cabinet will open. Event Buffer: 100,000 The administrator can use PC to open all doors at one time to do Communication: TCP/IP some check and manage work. Input: 1 Wiegand (26bit~40bit) Card reader PCB: 164×106 mm The cleaner can open all the door to do cleaning work after office- I/O output: 1 time. Can connect external anti-theft alarm linkage alarm expansion board Some customers do not like card reader, they also can use Standard version support 20 floors; Biometric instrument like: finger-print readers, face recognition Extend floor board 20 floors (Total 40 floors). and so on if they have wiegand format.