Professional Documents
Culture Documents
Options: Specification Output Torque
Options: Specification Output Torque
Standard Coupling
Ø 50
(supplied with actuator
weight 1.3 lbs/0.6 kg)
25.06
25.00
Model 12
31 156 35.5
26
14
To radius
12.5
Ø 100
15.98
15.93
24.98
24.93
Shown at centre Specification
of travel
Max.
55.0
5
24.98
24.93 2 Air ports staggered 31 Output Torque
Drive square thread detail below 4 Mount holes each
shown at centre side details below 4 Accessory
of travel mount holes 5000 lbf ins/575 Nm
details below at 100 psi/7 bar
68
Angle of Travel
55.0
(adjustable)
80
80° - 102°
239
294 Finish
Visual Red Indicator supplied as standard - see page 3
Epoxy stove enamel
Options Weight
Fail safe spring return units - clockwise Female drive and mounting details to DIN 14.8 lb/6.7 kg
or counter clockwise see pages 5-7 3337 and ISO 5211 see page 50 (excluding coupling)
Limit switch boxes for open/close Spring to centre see page 24
indication - various switches for For further information
hazardous areas see pages 9-12 Geared manual override see page 46 see General
Specification on
Integral solenoid valve see page 20 Code identification see page 62
page 50.
AP pneumatic positioner - full range of Torque outputs see pages 58-60
options see pages 17/18
See pages 49-52 for English dimensions
EL electropneumatic positioner - full and dimensions of spring options
range of options see pages 15/16
Accessory mount plate for positioners, switch
P3 on/off positioner - full range of options boxes and clear cone monitor. See TD149.
including hazardous area see pages 21-23
High Temperature / Low temperature
180° model see page 25/26 options see page 50
38