Professional Documents
Culture Documents
Mx122 Initial Setup Guide: Mcintosh Part No. 04175900
Mx122 Initial Setup Guide: Mcintosh Part No. 04175900
McIntosh Part No. 04175900 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MX122 Initial Setup Guide
STEP 1 STEP 4
Video Connection: TV/Monitor: press the ENTER Push-button to activate
Referring to figure ISG-1, connect the Switch power On to the TV/Monitor and your choice.
MX122 Rear Panel HDMI OUT MONITOR select the input that the video cable coming Note: If the antennas will not be used at this time,
1 Connector using a HDMI Cable to the from the MX122 is connected to. place them in a safe place for possible use in
the future.
video input on the TV/MONITOR.
STEP 5
McIntosh MX122:
Using the McIntosh
Remote Control press
the POWER Push- Figure ISG-6 Figure ISG-11
button to switch On the
Figure ISG-1 MX122.
Figure ISG-3
Use the Up or Down Directional Push-
buttons to highlight the Figure ISG-8
desired language choice.
Then press the ENTER
Figure ISG-2 Push-button to activate Figure ISG-13
the desired language.
STEP 3 Figure ISG-5
Remote Control: STEP 7 STEP 9
Locate the McIntosh HR088 MX122 Antenna Connection: MX122 Network Connection Setup:
Remote Control supplied with If you will be using mobile devices to Follow the On-Screen Instuctions to establish
the MX122 and install the communicate with the MX122 via Bluetooth the MX122 Network Connection to either
batteries. The LCD Window at and/or Wi-Fi wireless connection, select the Figure ISG-9
a Wireless Network Router or a Wired
the top of the Remote Control On-Screen Menu NEXT option. If you will Network Router. Once the connection has
should now indicate "AVP". If not be using mobile devices, but will connect been established between the MX122 and Figure ISG-14
it doesn't indicate "AVP", press to the Internet via a wireless computer a Network Router, the MX122 now has the
the "AVP" network router, also select NEXT option. ability to provide connection to the Internet
Push- When you will not be using any wireless (Radio & Updates) and mobile devices. Refer
button. communications (mobile devices or Internet to figures ISG-6 thru ISG-15. Figure ISG-10
connection) select the On-Screen Menu SKIP Note : 1. It is advisable, during the initial communications setup, to physically locate the MX122 and a Wireless Router in
option. Refer to figure ISG-4. close proximity to one another. Figure ISG-15
Use the (left), (right) Directional Push- 2. If there is difficulty in establishing communications between the Network Router and the MX122, temporarily switch
Off other devices connected to the same Router.
buttons to highlight the desired choice. Then 3. If you are still experience difficulty with establishing communications with the Network Router, contact the manu-
facturer of the Router for assistance.