Professional Documents
Culture Documents
Vinay.S: Executive Summary
Vinay.S: Executive Summary
S
Mobile: +91-9341722341 ~ E-Mail:vinayslohith@gmail.com
Seeking for a challenging and creative position, which utilizes my design and technical engineering knowledge to help
in the growth of the organization
Executive Summary
Having more than 8+ years of cross cultural experiences in Automobile product
Technical Skill Set Design and manufacturing of various products.
Design Engineering Currently designated as Senior Design engineer at L&T Technology services in
SCANIA R&D center, Supporting for SCANIA RTX (Scania satellite center),RTLA, RSDC and RCCE
Automobile, Off road from offshore and supporting multiple projects by using Catia, Enovia, OAS, Aros, Eco righting,
vehicles, Mining 3d experience, FRAS .
equipment, Aircraft Worked as Design engineer at L&T Technology services in SCANIA R&D center,
test rigs
Supporting for SCANIA Power train (Scania NM groups) projects and Sweden.
Manufacturing Worked as Design engineer in L&T technology services and Deputed to SANDVIK
Asia Design Centre, Bangalore.
CATIA V5 and Design & Development of Mining Equipment’s (Surface Drilling Rigs). Design
ENOVIA includes modeling, detail drawing,, assembly and detailing of groups (Mast, Frame & Power).
Worked as design engineer in Moog India Technology Center, Project involved test
Scania Process fixture Design, manufacturing drawing creation using GD&T, Evaluate design with stack up
Tools. OAS, analysis.
Aros, Fras, 3D Worked as design engineer in Weir mineral India limited, Project involved the
experience. design of cyclone clusters, ball millers, pump casings rubber molds, and machining fixtures for
Weir BDK Valves creation of manufacturing drawings.
Static structural Having extensive knowledge in design of casting, fabrication, Sheet metal and
analysis (CATIA) machining components.
Supported for overseas projects with reputed clients like SCANIA(Sweden), SANDVIK
Unigraphics NX9
(Sweden and USA), Weir minerals (Canada, Chile, Australia and India).
Team center 8 & 9.
Involved in various types of design projects in all aspects of engineering and design
Solid works 2015 practices from part studies, creation of DOU & MOM, and development of conceptual design
& analysis for the implementation and carrying out of detail design considering manufacturing
Team management
feasibilities as well.
Shop Floor
Experience in generating models from scratch till assembly, including prototype
Experience
manufacturing, testing, and field quality.
GD&T
Experienced in Advance GD&T and Drawing standards (ASME Y14.5), and assembly
Tolerance Stack- stack up analysis.
upsAnalysis
Extensive knowledge of various manufacturing process like Injection mold, casting,
Reverse engineering press tool, sheet metal for Automotive. Good knowledge of design for manufacturability.
Hands on Experience in Fitting, Turning, Milling, EDM, Jig boring and inspection of precision components.
Involved in providing optimum design (Through DFM and DFA) at minimum cost for different clients
Professional Experience
Larsen and Toubro Technology Services, Bangalore
Project: 1
Duration Jun 2017 to till date
Product design Support for Scania RTX and other groups
Project Name
of Scania.
Team Size 15 people
Design and development of sheet metal brackets, Pipe routing, drawing creation, ECO writing, for
Description
RBRF,RC and RTLA groups, event checking in Fros application.
Responsibilities:
➢ CATIA V5, ENOVIA VPM, OAS prime(Part search, Where used analysis, Knockdown
Tools
assembly, Provision creation, GEO breakdown, FPC codes, ECO study), AROS (To write
ECO), 3D experience ( For drawings), FRAS (PD, PR, PCR and Event checking and handling)
Project: 2
Duration Jan 2016 to till date
Design & Development of SCANIA Power train
Project Name
components.
Team Size 5 people
Design and development of Turbochargers (Turbo housings, Bearing housing, Compressor housing,
Description Internal components like Wheel, shaft etc.,) , Intake manifolds , Exhaust Manifolds , Flange
connections, Oil and Fuel Pipe routings , Support brackets design
Responsibilities:
➢ Development and modification of casting, machining, and sheet metal components using
CATIA V5.
➢ Coordination with onsite team for day to day development works.
➢ Design support for Varies engine components like Turbo and compressor housing, exhaust
Role &
manifolds, pedestal brackets etc.
Contribution
➢ Routing of lubrication and coolant pipes for Turbo charger components.
➢ Generating models from scratch till assembly, including prototype manufacturing, testing,
and field quality.
➢ Layout study of Engine parts by using motion simulation in CATIA (Kinematics).
➢ Supporting for sourcing of nonstandard parts.
➢ Performing CATIA structural analysis).
Client Scania CV AB, Sweden
Design & Development of Mining Equipment’s (Surface Drilling Rigs). Design includes modelling, detail
Description
modeling, assembly and detailing of groups (Mast, Frame & Power).
Responsibilities:
Project involved fire pump packages Design for commercial buildings and remote sites,
Description
manufacturing drawing creation using GD&T, Evaluate design with stack up analysis
Responsibilities:
Project involved test fixture Design, manufacturing drawing creation using GD&T, Evaluate
Description
design with stack up analysis
Responsibilities:
Project involved the design of cyclone clusters, ball millers, Pump casings rubber molds, and
Description
machining fixtures for Weir BDK Valves creation of manufacturing drawings.
Responsibilities:
➢ Design of cyclone clusters, ball millers, screeners for different countries and their standers.
➢ Conversion of old drawing, Hand sketch drawing to parametric Unigraphics NX6 model.
Role & Contribution ➢ Preparing fabrication drawings for manufacturing.
➢ Martial and stranded selection as per availability and country norms.
➢ Modeling, surfacing, Assembling and Detailing.
➢ Cad automation and customization to create preliminary assembly’s.
➢ Designing and validating walkway frames and stair ways according to standards.
➢ Creating assembly sequence videos.
➢ Coordinate with onsite engineers for Query’s and issues.
➢ Design of valve bodies for Weir BDK Valves.
Client Weir minerals Australia, Weir minerals Chile, Weir minerals CANADA and weir minerals India.
Tools Catia, Unigraphics (NX6 and 7.5), Team Center 8, solid works 2012.
Larsen and Toubro Limited, Coimbatore
Duration June 2010 to May 2011
Project Name Trainee engineer for Production center
Team Size 50+ people
Machine planning &Process planning for complete manufacturing process, Designing and 3D modeling
Description
of machining fixtures for Aeronautical components, automotive components and covers.
Responsibilities:
Role & Contribution ➢ Conversion of old drawing, Hand sketch drawing to parametric Unigraphics NX6 model.
➢ Designing Jigs and Fixtures. (machining and inspection Process planning and manufacturing
➢ Extracting copper / Graphite electrode shapes for tools creating CAM programs for
electrodes using UG CAM 6, Master Cam X.
➢ Machine planning &Process planning for complete manufacturing process.
Client Hindustan Aeronautical Limited (HAL) Bangalore, DRDO Hyderabad, Nissan motors Chennai, Larsen and
Toubro switch gears.
Tools Unigraphics (NX6), Master Cam 9 and X3.
Academic Qualifications
Diploma in Precision Manufacturing from (Govt tool room and training center, Mysore), Department of
Technical Education, KARNATAKA in the Year of 2011 with 82%.
Personal Profile
I hereby declare that the above furnished details are true, to the best of my knowledge.
Bangalore (VINAY.S)