Download as pdf or txt
Download as pdf or txt
You are on page 1of 12

Leading Innovation, Creating Tomorrow

MASCON S24
Compact Medium Voltage Switchgear

Power Transmission & Distribution

IS-VINA
http://www.lsisvina.com
Design Concept:
Can be reduction in mounting up to 76% space. That can be enough to carry by elevators of the
apartment with small dimention, lightweight and easy for move at site.

COMPACT!

24kV-630A MESG 4 Panel

LBS MOF PT VCB


Height 11% reduction

Installation space
width 46%
reduction
50% reduction
in depth 2500

Bottom 73% reduction


50
11

LBS MOF PT VCB

MASCON S24

Product Characteristics: CLASSIFY BASIC PANEL MASCON S24


- MASCON S24 is an air insulated, metal enclose swithg
hgea
ear.r. FLOOR AREA 3.5m (22%)
- MASCON S24 promimise
se saf
afet
etyy in use and environment.
- MA
MASC
SCON
ON S24 make posible to save space. WIDTH 2500 (48%)
- MASCON S24 can be installed in varrious place. HIGHT 2100 (89%)
DEPTH 1150 (46%)

CLASSIFY CONTENT CLASSIFY CONTENT

Rated voltage [kV] 24 Lightning Impulse Withstand [BIL] 125


Rated current [A] 630 Degree of Protection IP3x
Power Frequency Withstand Voltage [kV] 50 Altitude < 1000m Sea Level
Operation
Rated short time current [kA] 25/62.5 Ambient
Invironment
Rated frequency [Hz] 50 Humidity 95%

LS-VINA Industrial Systems


With digital know-how, LSIS-VINA provides future technology in electrical
equipment field for the customer’s satisfaction.

Application:

LS-VINA Industrial Systems


Compact Medium Voltage Switchgear
MASCON S24 CONTRUCTION:

BUSBAR Compartment LBS Driver LBS Insulator


VCB

 Busbar Compartment:
The busbar compartment is located on top of the cubicle. It contains the main busbar that
interconnect between cubicles.
 Mechanism and Low Voltage Compartment: VCB OUTGOING FUSE
Mechanism and low voltage compartment is seperated for easy maintenance and repair.
 Load Break S/W compartment:
Brand new epoxy housing is applied. It is 3position(On-Off -Earth) and insulated by SF6 Gas.
 Cable compartment:
Power cables are making it possible to use 1-3 phase cables with simple unscreened termination.

LS-VINA Industrial Systems


MASCON S24
Main Configuration:

LBS MOF PT FUSE VCB MAIN VCB OUTGOING

500 500 500 500 500 500

1085 1085 1085 1085 1085 1085

2040 2040 2040 2040 2040 2040

LS-VINA Industrial Systems


Compact Medium Voltage Switchgear

CUBICLE TYPE:

Load Break S/W Cubicle (TLS)

TLS/1 TLS/1a

(Width 500 Hight 2040) (Width 500 Hight 2040)

Load Break S/W Cubicle (TLS)

TLS/1b TLF/1c

(Width 500 Hight 2040) (Width 500 Hight 2040)

6 LS-VINA Industrial Systems


MASCON S24

Fuse Combination Load Break Cubicle (TLF)

TLF/1e TLS/1d

M
M

(Width 500 Hight 2040) (Width 500 Hight 2000)

MOF Cubicle (TME) & PT Cubicle (TPT)

TME TPT

(Width 750 Hight 2040) (Width 500 Hight 2040)

LS-VINA Industrial Systems 7


Compact Medium Voltage Switchgear

CUBICLE TYPE:

Circuit Breaker Cubicle (TVB)

TVB/1 TVB/2

M M

(Width 750 Hight 2040) (Width 750 Hight 2040)

Circuit Breaker Cubicle (TVB)

TVB/3 TVB/4

M M

(Width 750 Hight 2040) (Width 750 Hight 2040)

8 LS-VINA Industrial Systems


MASCON S24

Bus Riser & Connection Cubicle (TLB)

TLB/1 TLB/2

(Width 500 Hight 2040) (Width 500 Hight 2000)

Bus Riser & Connection Cubicle (TLB)

TLB/3 TLB/4

(Width 500 Hight 2040) (Width 500 Hight 2040)

LS-VINA Industrial Systems 9


Compact Medium Voltage Switchgear

USING EQUIPMENT AND COMPONENTS:

Switch Disconnector (Epoxy Housing)


The switch-disconnector has 3 positions (Close-Open-Earthing) is using SF6 as extinguishing arc and insulation.

Switch Disconnector:
Voltage [kV] 24
Rated current [A] 630
Rated frequency [Hz] 50
Rated short time current [kA] 25kA/1s (3s)
Power Frequency Withstand Voltage [kV] 50
Rated Impulse Voltage [BIL] 125
Rated short-Making current [kA] 62.5
LBS

Side Mounting Circuit Breaker


The vacuum circuit breaker Pro-MEC Side mounting VCB has been specially designed for LS Mascon S24 MVSG.
The switching capacity is sufficient for any conditions arising from switching of the equipment as well as from system
components under normal operating and fault conditions.

SM - VCB Specifications:
Voltage [kV] 24
Rated current [A] 630
Rated frequency [Hz] 50
Rated short time current [kA] 25kA/3s
Power Frequency Withstand Voltage [kV] 50
Rated Impulse Voltage [BIL] 125
SM VCB Rated short-Making current [kA] 62.5

Current Transformers
This current transformer can be used with electronic relays according to the class and burden below. These
data only describe our basic type. Other types are available upon request. It can be installed with capacitive
voltage indication device.
CT Specifications:
Voltage [kV] 24
Ratio[A] 200-400-600/5/5(1)
Rated frequency [Hz] 50
Rated short time current [kA] 25kA/1s (3s)
Power Frequency Withstand Voltage [kV] 50
Rated Impulse Voltage [BIL] 125
Rated short-Making current [kA] 62.5

CT

10 LS-VINA Industrial Systems


MASCON S24

HRC Prime-MEC Power Fuse (DIN Type Power Fuse)


The LS HRC Power Fuses belong to the PRIME MEC series. It interrupts high currents before the first loop of fault current
has reached its natural peak value and therefore cuts down the required withstand capacity of the associated equipment
on the electric system.
Power Fuse Selection Table:
Power Fuse rated Voltage [KV] Power Fuse rated current [A] Transformer capacity [kVA]

GIPAM (Integrated Protection and Metering Equipment)


Instrumentation and protective relaying functions into one converged, complex digital power monitoring device protection.

Main Feature Main Function


· Protective relaying elements: OCR, OCGR, OVR, UVR, SGR,
OVGR, POR of the seven kinds of protective factors

· Measuring element: 3-phase / seonganjeopap, three-phase


current, video-voltage, active / reactive power, active / reactive
power, power factor, Frequency measurement, including nine
kinds of

· Accident records and self-diagnostic capabilities

· Control features: Circuit Breaker On / Off Control and Local /


Remote switch available

· Communication features: I-NET, MODBUS communication


available by the high-speed communication

LS-VINA Industrial Systems 1


Leading Innovation, Creating Tomorrow

© LS-VINA Industrial Systems Co.,ltd All rights reserved

LS-VINA Industrial Systems http://www.lsisvina.com

■ HEAD OFFICE
Nguyen Khe - Dong Anh - Ha Noi - Viet Nam,
Tel. (+84-4) 8820222
Fax. (+84-4) 8820220
http://www.lsisvina.com
Email: support@lsisvina.com

■ HA NOI OFFICE
13th Floor - M3M4 Office Centre
91 Nguyen Chi Thanh Str.
Dong Da - Ha Noi - Viet Nam,
Tel. (+84-4) 62758055 Fax. (+84-4) 62758056
Email: saleshn@lsisvina.com

■ HO CHI MINH City OFFICE


7th Floor - Yoco Building
41 Nguyen Thi Minh Khai Str.
District No.1Ho Chi Minh City - Viet Nam,
Tel. (+84-8) 8227941 Fax. (+84-8) 8227942
Email: saleshcm@lsisvina.com

MASCON S24 Medium Voltage Switchgear 2011.05 Printed in Viet Nam

You might also like