Professional Documents
Culture Documents
CMSS 2200 / CMSS 2200-M8: Industrial Accelerometer, Side Exit
CMSS 2200 / CMSS 2200-M8: Industrial Accelerometer, Side Exit
CMSS 2200 / CMSS 2200-M8: Industrial Accelerometer, Side Exit
Lifetime A
Industrial accelerometer, side exit WARRANTY
Features
• For use with all SKF on-line systems, protection systems and the
portable data collection instruments
Electrical
• Rugged, economical and all around general purpose sensor
• 100 mV/g sensitivity to optimize use in multiple applications • Power requirements:
• Exceptional bias voltage (BV) stability at elevated temperatures – Voltage source: 18 to 30 V DC
• Designed for exceptional low noise level over a wide temperature – Constant current diode: 2 to 10 mA, recommended 4 mA
range • Electrical noise:
• Meets CE, EMC requirements – 2,0 Hz: 20 µg/√Hz
• Captive mounting bolts (1/4-28 and M6 x 1,00) provided • Output impedance: < 100 Ω
• Corrosion resistant and hermetically sealed for installation in high • Bias output voltage: 12 V DC
humidity areas • Grounding: Case isolated, internally shielded
• Reverse polarity wiring protection
Dimensions
Recommended connector/cable assembly 1/4 in socket head captive screw
26,0 mm
Speciications MODEL CMSS2200
40,0 mm (1.04 in.) MODEL CMSS2200-M8
S/N S0000
(1.60 in.) CMSS 2200:
Speciications conform to ISA-RP-37 2 (1-64) and are typical values 1/4-28 or M6 x
referenced at 24 °C (75 °F), 24 V DC supply, 4 mA constant current 1 00 mounting
23,0 mm thread
and 100 Hz
6,3 mm (0.92 in.)
(0.25 in.) CMSS 2200-M8:
M8 x 1 25 mount-
Dynamic ing thread
16
Typical temperature response Typical frequency response
+5 2
1
0
0
–5 –1
–2
–10
–50 0 +50 +100 +120 –3
0.7 1 10 100 1k 10 k
(–60) (+30) (+120) (+210) (+250)
Environmental Physical
• Temperature range: –50 to +120 °C (–60 to +250 °F) operating • Dimensions: See drawing
temperature • Weight: 135 g (4.8 oz.)
• Vibration limit: 500 g peak • Case material: 316L stainless steel
• Shock limit: 5 000 g • Mounting: 1/4-28 and M6 x 1 captive socket head screw
• Electromagnetic sensitivity, equivalent g, maximum: 30 µg/gauss • Mounting torque: 2,9 Nm (24 in lbs )
• Sealing: Hermetic • Connections:
• Base strain sensitivity: 0,002 g/µstrain – Shell: Ground
• CE: According to the generic immunity standard for Industrial – Pin A: Power/Signal
Environment EN 50082-2 – Pin B: Common
– Acceptance criteria: The generated “false equivalent g level” • Mating connector: CMSS 932-68LC or CMSS 932-68TL, two pin,
under the above test conditions should be less than 2 mg meas- IP 68, locking collar or twist lock
ured peak to peak • Recommended cable: CMSS 932-SY-XXM and CMSS
932-DY-XXM, two conductor, twisted pair, single shielded, yellow
Ordering information
17