Professional Documents
Culture Documents
THE Aars MNI Herm Advantage
THE Aars MNI Herm Advantage
ITHERM
LAARS OMN
NEAR CONDENS
ING - BOILER AND VOLUME WATER HEATE
R
A A
S S
M M
E E
H HLW
COMMERCIAL HEATING
DESIGNED FOR PERFORMANCE
DESIGNED TO LAST
At the heart of the OmniTherm is a patent pending stainless
steel corrosion resistant heat exchanger, industry leading
electronic air-to-fuel ratio combustion control and the
advanced Laars Linc control platform.
All of this has been combined for the first time in a near
condensing heating platform that can withstand cold return
water temperatures for all venting categories. Never again
have to worry about heat exchanger fouling issues!
VS.
The OmniTherm incorporates a best-in-class OmniTherm heat exchangers Typical vertical copper finned
stainless steel heat exchanger design and use 439 corrosion resistant heat exchangers are prone to
responsive electronic combustion control for stainless steel tubing that can air side fouling after repeated
withstand continuous operation exposure to condensing
reliable, long life operation. in condensing conditions and conditions. Poor combustion,
remain in prestine condition. reduced efficiencies and boiler
failure can ultimately occur.
Dimensions:
A B
“A” “B” “C” “D”
Model
in. (cm) in. (cm) in. (cm) in. (cm)
Air Inlet
1250 24½ (62) 27 (69) 39 (99) 66 (168)
1500 24½ (62) 27 (69) 39 (99) 66 (168)
Gas Inlet
D 1750 32 (81) 43 (109) 53 (135) 69 (175)
2000 32 (81) 43 (109) 53 (135) 78 (198)
2500 32 (81) 43 (109) 53 (135) 78 (198)
Vent Collar
3000* 32 (81) 43 (109) 53 (135) 85 (216)
Condensate
Trap
Category II/IV units operate with up to 7:1 turndown, Category I/III units
C Water Water
Outlet Inlet operate with on/off operation. Reference submittal documentation for
more details.
*3000 MBH size available in category II/IV venting configuration only.