Professional Documents
Culture Documents
Front Side Member (Cut-P) : With The Radiator Side Support Removed
Front Side Member (Cut-P) : With The Radiator Side Support Removed
Symbol meaning
F27756A F27756B
REMOVAL
[LH]
140 (5.51)
65 (2.56)
Front Side Outer Member
mm (in.)
F27756
REMOVAL POINT
1 Remove the front side outer member at the same time.
BRM
VIOS
BM0880EV
BODY PANEL REPLACEMENT BP-7
[RH]
70 (2.76)
Front Side Outer Member
140 (5.51)
mm (in.)
F27757
REMOVAL POINT
1 Remove the engine front mounting bracket befor conducting this work.
2 Remove the front side outer member at the same time.
BRM
VIOS
BM0880EV
BP-8 BODY PANEL REPLACEMENT
Symbol meaning
F27756B
[LH]
30 (1.18)
[RH]
47 (1.85)
mm (in.)
F27758
REMOVAL POINT
1 *1: Take care not to damage the internal reinforcement.
2 These values are reference values.
BRM
VIOS
BM0880EV
BODY PANEL REPLACEMENT BP-9
Symbol meaning
F27759B
INSTALLATION
[LH]
F27759
INSTALLATION POINT
1 Temporarily install the new parts and measure each part of the new parts in accordance with the body
dimension diagram. (See the body dimension diagram)
2 After welding, apply body sealer and undercoating to the corresponding parts. (See the paint.coating)
3 After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural
weld points.
BRM
VIOS
BM0880EV
BP-10 BODY PANEL REPLACEMENT
Symbol meaning
F27759B
F27760
INSTALLATION POINT
1 Remove the engine front mounting bracket from a new parts of the front side member reinforcement.
2 Temporarily install the new parts and measure each part of the new parts in accordance with the body
dimension diagram. (See the body dimension diagram)
3 After installing the new parts, install the engine front mounting bracket.
4 After welding, apply body sealer and undercoating to the corresponding parts. (See the paint.coating)
5 After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural
weld points.
BRM
VIOS
BM0880EV