Professional Documents
Culture Documents
GE Decashield
GE Decashield
Lighting Solutions
Area Lighting
Decashield ™ 400 (DSMT, DSME & DSMR)
imagination at work
Product Features
Designed for superior photometric performance and architectural appeal, GE Outdoor Area Sightlighters provide
broad application flexibility. From parking lots to downtown areas, hospitals to shopping malls, business complexes
to residential neighborhoods, these fixtures will satisfy your large area lighting needs, while complementing your
aesthetic desires.
Rating
• / 1598 Listed Suitable for Wet Locations
Mounting
• Decorative Mounting Arm standard for flat or
curved (for 3.5 to 4.5) OD pole (drilling templates
are the same as those for the Decashield 1000™
and Dimension™ luminaires)
Reflectors
• ALGLAS™ finish on Type II, Type III and Type V
reflectors, anodized finish on Forward Throw reflector
Ordering Number Logic
Decashield™ 400 (DSMT, DSME & DSMR)
____ - __ - _ - _ - _ - _ - G_ - ___ - __ - _
23.250 in
8.000 in. (591 mm . R
(203 mm) R)
24.000 in. (610 mm)
6.82
(173 0 in.
mm
)
2.250 in.
(57 mm)
17.000 in.
(432 mm)
DSMT DSMR
SQUARE POLE MOUNTING: STANDARD ROUND POLE MOUNTING
3.5 to 4.5-inch (89 to 114mm) OD round pole
.312 in. (6 mm) DIA
Hole
.312 in. (6 mm) DIA Hole
.438 in. (11 mm) DIA
5.250 in. Holes
(133 mm) .438 in. (11 mm) DIA
MIN 5.250 in. Holes
1.812 in. (133 mm)
2.196 in. (56 mm) MIN
(46 mm)
1.812 in. 2.719 in. (69 mm)
4.392 in. (46 mm)
1.250 in. DIA (112 mm)
(32 mm DIA) 5.438 in.
HOLE .750 in. DIA (138 mm)
(19 mm DIA)
HOLE
.656 in. (17 mm)
1.312 in. (33 mm)
NOTE: The wind loading of Decashield Luminaires, when mounted to poles in multiples radially about the axis of the pole, do not necessarily have the EPA of
a single luminaire multiplied by the number of luminaires.
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2012 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.