Professional Documents
Culture Documents
Diploma 1
Diploma 1
In a DNC system
(a) NC
(b) CNC
(c) DNC
(d) CCNC
Show Answer
3. DNC stands for
(a) VMC
(b) CNC
(c) DNC
(d) all of the mentioned
Show Answer
8. In the CNC machine tool, the part program entered into the computer memory
(a) NC
(b) CNC
(c) both NC and CNC
(d) none of the mentioned
(a) reaming
(b) parting
(c) grooving
(d) facing
13. CNC machine has the following main advantage over conventional machining
(a) Ability to employ higher cutting speeds, feeds and depth of cut
(b) Feedback control
(c) Flexibility
(d) None of the mentioned
Show Answer
14. Which one of the following is not the advantage of the CNC machine?
(a) milling
(b) boring
(c) welding
(d) tapping
Show Answer
16. For CNC machining skilled part programmers are not needed.
(a) True
(b) False
Show Answer
17. An absolute NC system is one in which all position coordinates are referred to
(a) True
(b) False
Show Answer
18. In machining of a workpiece, the material is removed by________.
(a) feed
(b) depth of cut
(c) depth of tool
(d) working depth
Show Answer
20. Feed is measured in units of __________.
(a) length/revolution
(b) degree/revolution
(c) length
(d) degree
Show Answer
21. The control loop unit of M.C.U is always
(a) networking
(b) pairing
(c) interlocking
(d) assembling
Show Answer
24. The process of putting data into a storage location is called
(a) reading
(b) writing
(c) controlling
(d) hand shaking
Show Answer
25. The process of copying data from a memory location is called
(a) reading
(b) writing
(c) controlling
(d) hand shaking
Show Answer
26. A typical punched card used in IBM systems has _______ columns.
(a) 70
(b) 80
(c) 85
(d) 90
Show Answer
27. Which type of blocks are punched into a punch card?
(a) Circular
(b) Elliptical
(c) Rectangular
(d) Square
Show Answer
28. On which component the data once stored can be erased and new data saved?
(a) Correct
(b) Incorrect
Show Answer
30. The data stored on magnetic tapes and disks can be corrupted if these are brou
(a) True
(b) False
Show Answer
31. A standard punch tape is ______ mm wide.
(a) 20
(b) 25
(c) 27
(d) 30
Answer:
Option (b)
32. Which of the following is not types of NC program reader?
(a) 2
(b) 3
(c) 4
(d) 5
Answer:
Option (b)
35. Continuous path control system is suitable for which type of applications?
(a) True
(b) False
Show Answer
37. In an incremental positioning programming system, the next tool location mu
(a) Correct
(b) Incorrect
Show Answer
38. In CNC systems multiple microprocessors and programmable logic controller
(a) in parallel
(b) in series
(c) one after the other
(d) for 80% of the total machining time
Answer:
Option (a)
39. _______of motion is always the axis of the main spindle of the machine.
(a) Z-axis
(b) Y-axis
(c) X-axis
(d) none of the mentioned
Show Answer
40. Due to the higher cutting speeds and feeds in CNC machines which types of f
(a) True
(b) False
Answer:
Option (a)
43. Stepper motors are suitable only for which types of machines?
(a) G00
(b) G01
(c) G56
(d) G94
Answer:
Option (a)
49. Which of the following code will give a linear interpolation movement?
(a) G00
(b) G01
(c) G78
(d) G65
Answer:
Option (b)
50. Which of the following code will give circular interpolation in a clockwise di
(a) G56
(b) G01
(c) G02
(d) G47
Answer:
Option (c)