system consists of a primary seal which protects the bearing, and a secondary seal that protects the primary seal. This dual seal system will perform reliably for extended periods of time in high RPM, heavier WOB, high mud weight and severe dogleg applications. Spinodal 2 bearing with silver plated components ensures longer runs at higher ROP. This The Gemini Dynamic Twin Seal System is the industry leader in durability and reliability. Since its introduction, proprietary material offers The Gemini System has undergone a continuing regimen of improvements in both materials seal profile. The maximum wear resistance system consists of a primary seal that protects the bearings and a secondary seal that protects the primary seal. and withstands extreme The proprietary dual material primary seal combines a highly wear resistant dynamic face elastomer and a softer load forces for longer energizing material that exerts a consistent, but not excessive, contact pressure. This “bullet” shaped primary periods than conventional seal has a large cross sectional profile to provide maximum protection for the bearing. bearing materials. Binary diamond gauge uses semi-round top diamond inserts positioned between Bearing Type Spinodal™ 2 Bearing w/Silver Plated Components the primary gauge inserts to Seal Type Gemini™ Twin Seal System maximize gauge retention Bit Connection Type 6-5/8" API Reg. in transitional drilling. This substantially increases bit Rows Total: 14 Inner: 11 Gage: 3 life and reduces operating Inserts/Teeth Total: 195 Inner: 135 Gage: 60 costs. Diamond enhanced heel inserts maintain gauge in abrasive,hard formation Weight on Bit 15,000 To 60,000 (lbs) drilling and significantly 6,818 To 27,270 (daN) increase cone durability. 7 To 27 (Tonnes) This feature extends bit life Rotary Speed (RPM) 240 To 50 and ensures that a full gauage hole is drilled. Operating parameters are typical ranges. Please contact your Smith Bits representative for recommendations for your individual well.