Professional Documents
Culture Documents
TRACE-THERM Solution Brochure
TRACE-THERM Solution Brochure
TRACE-THERM Solution Brochure
TRACE-THERM
HEAT TRACED SYSTEM
Challenges
Pipelines are a simple and cost-effective way of transporting materials, liquids, powders, and gases, sometimes for
relatively long distances. Thermal insulation is often installed on the pipeline to prevent liquids and gases from changing
state or to reduce viscosity to enhance flow. However, thermal insulation may not be enough and additional heating is
required. The longer the pipeline, the bigger the challenge.
PERMA-PIPE understands these situations, as well as the importance of having a well designed thermal insulation
system. Introducing TRACE-THERM, the next level of reliable heat traced solutions. TRACE-THERM is an intelligent heat
traced pre-insulated piping system engineered to ensure optimum heat management during the life of the pipeline.
Single or multiple layers of insulation materials are designed to minimize heat loss and meet system design operating
temperatures and cool down requirements. Multiple layers consist of different materials designed to minimize the
finished product outer diameter, therefore reducing total installed cost.
Tubes or raceways are utilized for easy installation of the heat tracing and fiber optics cables.
1. Skin effect heat tracing utilizing specially designed 3. Impedance heat tracing utilizing the carrier pipe to
cables which run through ferromagnetic tubes generate heat in the system through the application of a
that heat up when the cables are energized. low AC voltage to the pipe.
2. Direct heating through the use of a heating 4. Direct heating through the use of steam to heat the
element or heat tape contacting the pipe along its carrier pipe directly or through heat tubes.
length.
A tough outer casing covers the insulation to eliminate damage during installation and operation, preventing water
ingress and costly corrosion under insulation. Optional materials include: durable high-density polyethylene,
fiber-reinforced materials, and metals.
Why TRACE-THERM
PERMA-PIPE’s TRACE-THERM intelligent heat traced pre-insulated piping system
is the most economical and maintenance-free solutions for above or below
ground applications that require safe, reliable, and even heat distribution.
Typical TRACE-THERM Cross Section <257° F (125° C) Typical TRACE-THERM Cross Section >257° F (125° C)
TRACE-THERM Advantages
Intelligent heat traced pre-insulated piping system.
CORPORATE HEADQUARTERS
PERMA-PIPE International Holdings, Inc.
+1-281-598-6222
askpermapipe@permapipe.com
SALES OFFICES
AMERICAS
Niles, Illinois, USA Spring, Texas, USA Calgary, Alberta, Canada
PERMA-PIPE RESERVES THE RIGHT TO UPDATE, REVISE AND AMEND ALL TECHNICAL DATA OR CONTENT AT ANY TIME. PERMA-PIPE SHALL HAVE NO LIABILITY
OF ANY KIND OR NATURE FOR ANY TECHNICAL ERRORS OR OMISSIONS IN ANY TECHNICAL LITERATURE. Please contact us at askpermapipe@permapipe.com for
the latest update. Copyright © 2019 PERMA-PIPE. All rights reserved. TTSB 10/17/19.