Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Clariflocculators – Clarifiers – Settlers – Flotators

PRCCC1 Clariflocculator with turbine


central drive type

T he clariflocculator with turbine and


central drive type PRCCC1 consists
of a rotation unit with central drive
the sludge precipitated to the sloping
bottom of the tank and gathers it in a
central ditch wherefrom it is then
Strengths
including a gear motor and slewing sucked. The clarified water is removed • MOBILE GIRDER WITH
ring, a high efficiency turbine, a bot- by means of the weir. The scraper and CENTRAL DRIVE, COMPLETELY
tom scraper system having two blade any moving parts of the bridge are HANGING ALSO WITH REGARD
TO LARGE DIAMETER
holder arms, a central deflector cylin- supported and moved only through the
CLARIFIERS (UP TO 60 m).
der which defines the mixing and floc- central slewing ring bearing.
culation compartment and a peripher- This way, the sedimentation tank vol- • CLARIFIER VOLUME FREE FROM
al weir. The control and drive unit is ume, free from any parts in motion MECHANICAL MOVING PARTS.
located in the middle. allows, for example, the installation of • REDUCED MAINTENANCE OF
It comprises an electric motor, a mul- lamellar packs in its inside and it THE REINFORCED CONCRETE
tistage reduction unit of coaxial and/or avoids the maintenance on the clari- TANK.
planetary type and a slewing ring with fier edge required if the bridges is • TURBINE WITH HIGH
hardened and tempered teeth of ade- peripheral driven type, in correspon- HYDRAULIC EFFICIENCY.
quate size. The protection against dence of the traction trolleys. On
• MINIMUM ENERGY
overloads is carried out by an elec- request it is possible to have the float- CONSUMPTION.
tronic torque limit switch for diame- ing materials recovery and elimination
ters up to 20 meters while as regards system consisting of surface scrapers, • POSSIBILITY FOR
the diameter equal to or greater than periphery deflector and scum box. It is CONTEMPORANEOUS
REMOVAL OF SETTLED SLUDGE
20 meter, an adjustable dynamomet- also possible to request a walkway for
AND FLOATING MATERIALS.
ric torque limit switch complete with the inspection on the central unit, the
alarm signaling device is required. The standard type of execution is diame-
gear motor to drive the turbine is tral as for diameters up to 20 meters
located in the middle of the slewing and radial as for diameters equal to or
ring and since it has a variable speed, greater than 20 meters.
the coagulants mixture is optimized The standard construction is in carbon
and the flock precipitation made eas- steel. On request, the construction in
ier. The sludge scraper blades remove stainless steel or aluminium is possible.
PRCCC1 - CLARIFLOCCULATOR WITH TURBINE CENTRAL DRIVE TYPE

3 8 9

7
6

2 4
5
1 WATER INLET 1
2 SLUDGE OUTLET
3 FIFTH WHEEL
Legend

4 SLUDGE SCRAPING BLADE


5 DITCH SLUDGE SCRAPING BLADE
6 FLOCCULATION CHAMBER
7 NOTCH WEIR
8 TURBINE GEARMOTOR 6
4
9 SCRAPER GEARMOTOR 7

TYPE MAIN FEATURES UNIT DIMENSIONAL DATA


TANK DIAMETER (d) m 4 6 8 10 14 18 22 26 30 34 40 46 50 56 60
TANK HEIGHT (h) m 1,8 2,2 2,6 3,0 3,5 4,0 4,5 5,0
MAX TANK VOLUME m3 25 ÷ 14000
PERIPHERAL SPEED m/min 1,8
PRCCC1
POWER SUPPLY kW 0,18 0,25 0,35 0,55 0,75 1,1 1,5
TURBINE POWER kW 0,5 0,5 0,5 0,5 0,7 1,5 3 3 3 4 4 7,5 7,5 7,5 11
STEEL PARTS WEIGHT (*) kN 16 18 23 31 42 61 88 126 144 188 199 235 273 307 338
STEEL PARTS WEIGHT (**) kN 22 25 32 49 65 96 113 158 180 233 251 295 338 392 432
(*) Weight referred to the basin with concrete walkway.
(**) Weight referred to the basin with steel walkway.

SERECO srl
Zona Industriale, Tel. +39 080 4970799 e-mail: sereco@sereco.com
70015 Noci (BA) C.P. 174 ITALY Fax +39 080 4971324 www.sereco.com

You might also like