MAIN ASSEMBLY

1:25 SCALE SNAP-TOGETHER PLASTIC MODEL KIT POL824

Attach chassis assembly to body

assembly using metal screws.

BATMOBILE
FINAL DETAILS
1
105

Snap front roll pan 4

201
16 the
203 17
and rear roll pan 5 to 18
main assembly.
Insert beacon lens
105 into beacon
14
201. Snap beacon
assembly, and This kit can be assembled by snapping together the parts as DECAL APPLICATION
antlers 16 & 17 indicated by the instructions. However, if you wish to glue the • Decal application is optional for the modeler.
to main pieces in a conventional manner, and detail the kit with paints, • Young modelers may need assistance from an adult.
assembly. 12 that is also an easy task. • Some supplied decals represent decoration present on the car
after its appearance in season 1 of the 1966 television show. They
GENERAL ASSEMBLY are supplied as options for the modeler.
• Before assembling model, study diagram carefully. • Duplicates are supplied in case an error occurs during application.
• For best results, assemble model exactly in the order indicated. • To apply decals, carefully cut them from the sheet and let each
4 • Take time to familiarize yourself with all the parts and their soak individually in lukewarm water for up to one minute. Once
15 corresponding part numbers. removed from the water, let the decal sit for an additional
4 Snap parachutes 11 & 12 and • Carefully cut the parts from the plastic tree supports and minute. Carefully slide the decal from the backing paper onto the
license plate 15 to main assembly. 11 remove any burrs. model surface.
• Apply decals to parts before beginning assembly.
Snap antenna 14 to main assembly.
OPTIONAL GLUING TIPS
Drop Robin into his seat. 5 • This kit is molded of styrene plastic – use only styrene compatible PAINTING GUIDE
Parts 16 & 17 paint guide
glues or cements. Paint is not required to complete this model but it is an option for the
• Before proceeding to cement parts together, it is advisable to fit builder. For best results when painting, use only high quality paints
parts together dry (without cement) so that you may familiarize designed specifically for use on plastic model kits. For the benefit of
Look for these other POL823 Batboat yourself with the parts and how they go together, also noting the young modelers, Model Master acrylic paints are suggested.
exciting model kits from GLUE kit
points where cement is to be applied.
• Apply cement to inside surfaces only and avoid getting cement
1 CLEAR RED........................................... 4630
Polar Lights! POL847 Batcycle
on outer surfaces of model sections.
• Use cement sparingly, being careful to avoid getting cement on 2 AIRCRAFT INTERIOR BLACK .......... 4767
GLUE kit hands, so as not to mar or smear plastic surfaces. 3 TURN SIGNAL AMBER ....................... 4624
• Do not hurry. Work carefully and patiently.
4 CHEVY ENGINE RED .......................... 4629
Contents include: All plastic pieces to complete model, 5 SILVER ................................................... 4678
POL821 Classic Batmobile metal axles, screws, a decal sheet and pictorial
instructions describing assembly. Models shown were
GLUE kit assembled by a professional modeler.

Special thanks to Eric Seltzer for assistance in developing this kit. Visit 1966batmobile.com Paints listed here are suggestions to match colors already applied
Batmobile design by George Barris. to the model. Modelers may choose to research the colors further
BATMAN and all related characters and elements are trademarks of and © DC Comics.
WB SHIELD: TM & © Warner Bros. Entertainment Inc.
to find colors that satisfy their own judgement.
(s11)
POLAR LIGHTS is a registered trademark of Learning Curve Brands, Inc. Used under license to Round 2, LLC.
Note: When paint symbols are placed next to a part number, this
Find more at
©2011 Learning Curve Brands, Inc. All rights reserved. © 2011 Round 2, LLC, South Bend, IN 46628 USA.
Product and packaging designed in the USA. Made in China. All rights reserved. indicates the entire parts should be painted. When the symbol is
round2models.com collectormodel.com placed on a part, this indicates that only specific areas should be
round2models.com painted.
INTERIOR – 1 32 4 INTERIOR – 4 205
Snap floorboards 19 & 20 onto chassis 2B. 28 Insert rims 204 into four rubber tires 301. 301
KEY TO SYMBOLS
Snap transmission tunnel 18 into chassis. 31 4 Insert metal axles into chassis and press 204 205
Snap phone cord 31 into phone 32. Snap 1 Opaque Plastic Part wheel assemblies to ends of axles. Snap 33
phone assembly and gear shift 28 into Bat-spinners 205 into wheels. Place
chassis assembly. 101 Clear Plastic Part Batman figure in driver seat and snap
18
201 Chrome Plastic Part steering wheel 33 into dash.

1 Decal Number 301

20
1 Paint Code
19 204
204 5

301
2B

301
205 204
6
205

INTERIOR – 2
Snap dash 21 into chassis assembly. Insert
front tabs of door panels 23 & 24 into slots in
21
5 24 EXTERIOR – 1
dash. Snap fire extinguisher 26 into
Insert rocket tubes 202 into rear deck 3B. Snap
extinguisher plate 27. Snap extinguisher 26 4 rear deck assembly into body 1B. Snap upper 3B
assembly into rear cabin 22. Slide rear cabin
lever 29 into arch 6. Snap arch assembly into
assembly onto tabs on door panels, snapping 27 5
5 body assembly.
the piece into chassis assembly. 1B 202
102
23 5
3 4 5
2 22
101
9

15 16
5
14
Insert headlights 101 & 102 and tail lights 104
Note: Decals should be 14
103 & 104 into body assembly.
7 8 10 11 13 applied before assembly.
103
6
29

INTERIOR – 3 5

Snap lower lever 30 and seats 25 to

30 5 EXTERIOR – 2
interior assembly. 5 25 Snap front grill pieces 9 & 10 and
10 2 107
25 108 5 109 106 & 107 into body assembly.
5 Snap rear grills 7 & 8 and tailpipe
9 2
13 into body assembly. Snap front
canopy 108 and rear canopy 109
into body assembly.

106

8 2
2 2
3 3 5

Parts 106 & 107 paint guide 7 2 13