This document summarizes the technical specifications of a high voltage terminal box for IEC motors. The terminal box has a maximum voltage of 11 kV and maximum current of 400 A. It can accommodate up to 1 cable per phase with a maximum cross section of 300 mm2. The box is made of welded steel plates at least 3 mm thick and has IP66 protection. Key features include a rigid welded construction, ample interior space for cable connections, and a turnable design that allows cable entry from either side.
This document summarizes the technical specifications of a high voltage terminal box for IEC motors. The terminal box has a maximum voltage of 11 kV and maximum current of 400 A. It can accommodate up to 1 cable per phase with a maximum cross section of 300 mm2. The box is made of welded steel plates at least 3 mm thick and has IP66 protection. Key features include a rigid welded construction, ample interior space for cable connections, and a turnable design that allows cable entry from either side.
This document summarizes the technical specifications of a high voltage terminal box for IEC motors. The terminal box has a maximum voltage of 11 kV and maximum current of 400 A. It can accommodate up to 1 cable per phase with a maximum cross section of 300 mm2. The box is made of welded steel plates at least 3 mm thick and has IP66 protection. Key features include a rigid welded construction, ample interior space for cable connections, and a turnable design that allows cable entry from either side.
This document summarizes the technical specifications of a high voltage terminal box for IEC motors. The terminal box has a maximum voltage of 11 kV and maximum current of 400 A. It can accommodate up to 1 cable per phase with a maximum cross section of 300 mm2. The box is made of welded steel plates at least 3 mm thick and has IP66 protection. Key features include a rigid welded construction, ample interior space for cable connections, and a turnable design that allows cable entry from either side.
The picture shows high voltage terminal box with its
main technical data below.
Technical data: Materials:
Voltage (max.) 11.0 kV Box welded sheet steel (thickness Current (max.) 400 A min. 3 mm) No of cables (max.) 1 per phase Cable gland plate steel Cross section of cables (max.) 300 mm2/cable Connection screws Bronze Bz Cable gland blind gland (1 pce) Isolators epoxy casting resin Clearance (min.) 100 mm Grounding pad stainless steel Creepage (min.) 158 mm Gross volume 122 dm3 Other features: Usable volume 116 dm3 - rigid welded construction Connection screws M16 (3 pcs) - ample size for making connections of supply cables Connection nuts tightening torque 40 Nm - box turnable to allow cable entry from left or right side Ground connections M12 (both in- and - box turnable in steps of 90° outside) - either 3-phase or 1-phase cables can be connected Weight 62 kg - pressure relief plate in the bottom of the box in case Protection IP66 of an arching short circuit Standard DIN 42962 TEIL 2, C2 - different cable glands available
Figure above: High voltage terminal box. Dimensions in mm.
54 ABB/ BU Machines / HV Induction motors IEC catalogue / Engineered motors EN 05-2006