Professional Documents
Culture Documents
Design of Irregular Slabs
Design of Irregular Slabs
Design of Irregular Slabs
م
2bh
d = diameter of the inscribed circle =
b + b2 +4h 2
Freely supported along all edges (corners restrained):
Bending moment (in two directions at corner of circle) = + wd 2 /16
Continuous along all sides :
Bending moment (in two directions at corner of circle) = + wd 2 /30
Bending moment (at sides ) = - wh 2 /30
w is the intinsity of uniformaly distributed load (or intinsity of pressure at
centre of circle if pressure varies uniformaly)
These expressions are vailed for values of v not greater than 0.2.
IRREGULAR SLABS
Design of reinforced concrete slabs قائد الحبيشي.م
The steel reinforcement design and other checks are done similar to that of solid slabs…