Professional Documents
Culture Documents
Dailey Cbc-Thruster: Spline Mandrel
Dailey Cbc-Thruster: Spline Mandrel
Dailey Cbc-Thruster: Spline Mandrel
CBC-THRUSTER®
s
Spline Mandrel
Spline Housing
s
Connector Housing
s
Hammer
s s
Wash Mandrel
Balance Piston
s
Balance Housing
s
Flow Restrictor
s
Bottom Connector
s
DAILEY®
CBC-THRUSTER®
SPECIFICATIONS
CBC-Thruster® - Standard
O u t s i d e D ia m e t e r (in.) 4 3 /4 6 1 /4 7 3 /4
I n s i d e D ia m e t e r (in.) 2 1 /4 2 1 /4 3
T o r s io n a l Y i e l d * ( x 1 0 0 0 ft. lb s .) 20 4 9 .3 100
A p p r o x . W e ig h t (lb s .) 475 1 ,0 0 0 1 ,6 0 0
T o ta l T r a v e l (in.) 15 1 6 1 /2 1 9 1 /2
T h ru s t A re a ( s q . in.) 1 0 .3 1 5 .9 2 8 .3
CBC-Thruster® - Tandem
O u t s i d e D ia m e t e r (in.) 4 3 /4 6 1 /4
In s id e D ia m e t e r (in.) 2 1 /4 2 1 /4
T o o l J o in t S iz e (A P I) 3 1 /2 IF 4 1 /2 IF
A p p r o x . W e ig h t (lb s . ) 590 1 ,2 0 0
M a x im u m B H T ( °F ) 400 400
PROPER OPERATIONS
The Dailey® CBC-Thruster is a downhole tool that provides Pump Open Force (POF) to apply hydraulic
Weight on Bit (WOB) during drilling operations. The CBC-Thruster also absorbs weight transfer from the
drill string and keeps the Positive Displacement Motor (PDM) from stalling out.
The POF is determined by multiplying the differential pressure by the pump open area of the CBC-Thruster. This area
is charted for your convenience. The differential pressure is the sum of the bit pressure drop, motor pressure drop, and
the pressure drop of any other component below the CBC-Thruster. The final WOB produced is equal to the POF less
the frictional drag of the Bottom Hole Assembly (BHA) between the CBC-Thruster and the Bit.
The WOB applied by the CBC-Thruster can be adjusted by varying the flow rate, the bit flow area, and type of PDM
used. The balancing of nozzle size and flow-rates is important in enhancing bit hydraulics. By doubling the bit differ-
ential pressure drop, the POF will double and increase the rate of penetration (ROP) and sliding efficiency.
If the CBC-Thruster is run above a retrievable MWD tool, the Tell Tale must be removed prior to operation. The
CBC-Thruster can be easily adjusted by selecting different size Tell Tales needed for a specific flow rate. This feature
insures that the variations in stand-pipe pressure can be noted at the surface. Contact your Dailey Representative for
information on selection of optimum size Tell Tale.
Contact your Dailey representative if you have any questions or if assistance is required concerning the proper opera-
tion of the Dailey CBC-Thruster.
Interpretation of data presented is responsibility of individuals using data. Weatherford cannot be held responsible for any loss or damage to any property whatsoever; injury or death to any persons whatsoever; or
any claims, demands, actions, complaints, proceedings, judgement, losses damages, compensation, liabilities, costs or charges however arising from the unauthorized or undirected use of these specifications.