Professional Documents
Culture Documents
Ovation Developer Studio WIN60 00
Ovation Developer Studio WIN60 00
Section 1. Introduction
1-1. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1-1.1. Studio System Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1-2. Contents of this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1-3. Interface to Other Software Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
1-3.1. Ovation System Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
1-3.2. Ovation Control Builder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
1-3.3. Ovation Graphics Builder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
1-4. Additional Reference Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Glossary
Index
1-1. Overview
The Ovation Developer Studio provides an integrated package that allows you to
quickly and easily perform configuration and engineering functions for a Windows
based Ovation System.
Figure 1-1 depicts the Developer Studio System Tree. Each folder contains all the
specific elements for that level. For example, the Drops folder will contain all drops
for a specific unit and drops can be inserted and configured through the Studio.
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Points
I/O Devices
Drops Folder Control Components
Control Tasks
Holding Registers
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
• Section 1. Introduction describes the contents of this document and lists other
reference documentation.
• Section 9. Defaults View Bar describes the contents and functionality of the
Default tab.
• Section 10. TrashCan View Bar describes the contents and functionality of
the TrashCan tab.
Caution
Most of the changes to the System Database are generated through the power tools
in the Ovation Developer Studio. Refer to “Ovation System Database User Guide”
(WIN15) for details about the System Database.
The functional drawings produced and edited by the Control Builder represent
portions of Controller logic. Typically, there are many different control drawing
sheets linked together to form the complete control structure. The drawings display
information about the algorithms that are used in that logic. In addition to editing,
the Control Builder provides integration support for the Controller and performs the
following high-level functions:
Two diagram files (source and object) are created and edited within the Graphics
Builder. The source (.src) format is a readable ASCII representation of the diagram
which adheres to the syntax of the graphics language. The object (.diag) format is
the corresponding “executable” or binary diagram file that is displayed at the
Ovation Operator Station by the Ovation Process Diagram software.
A Shape Library is also provided that can store up to 256 custom shapes. Files,
shapes, and symbols can be reused, thus saving development time and effort.
In addition to the documents listed above, this manual may refer to “applicable
vendor documentation,” which is defined on a project basis.
• Section 2-4 explains the function bars in the Studio and their purpose.
• Section 2-5 introduces the Developer Studio dialog boxes used in the
application.
When the Hardware view is selected, Ovation Developer Studio functions are
categorized in a Tree or hierarchal structure as illustrated in Figure 2-1. Ovation
configuration information is specified at appropriate levels of the system hierarchy.
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Points
I/O Devices
Drops Folder Control Components
Control Tasks
Holding Registers
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
For editorial purposes in this manual, each level of the Studio hierarchy is referred
to as a folder (as in Figure 2-1). The levels are listed below:
• Networks folder — contains all the networks in a system (details in Section 5).
• Units folder — contains all the units in a network (details in Section 6).
• Drops folder — contains all the drops in a unit (details in Section 7).
• Points folder — contains all the points in a drop (details in Section 8).
For example, if the trend screen background color is set to black at the System level,
all trend screen background colors will default to black throughout the entire
system. If, however, a trend screen background color is changed to green at the unit
level, trend screens in that unit, including all of the drops in that unit, will utilize the
green background. By having defaults move down through the system,
configuration information can be specified easily and customized where necessary.
The Menu bar and Tool bars provide functionality such as Save, Open and Create.
Click on a View bar to access its System Tree in the Overview window. The System
Tree is expandable to expose additional folders and files. Files stored in folders are
called objects.
Opening a file will generally spawn a function or document dialog box in the
Workspace window. Enter and edit values of object attributes in the dialog box and
save these changes to the database.
The Status bar displays menu information, identification of the drop where the
database resides, the drop which is servicing the current database connection, and
whether certain keyboard functions such as Caps Lock, Num Lock and Insert are
operational.
Though it is not displayed in the Developer Studio interface, the main tool used to
perform these operations is the Right-click menu, it is accessed by right-clicking the
mouse over an object or folder.
Only those functions that are available for the object selected will appear in the
Right-click menu. Figure 2-3 shows the right-click menu with all options available
and Table 2-1 describes the functionality.
Some of the specific functions accessed through these menus are discussed in Section
2-6.
Table 2-1. Right-Click Menu, Operation Menu Bar, Operation Tool Bar Items
Toolbar
Menu Item Description
Button
Insert New 1 Inserts a new item in the hierarchy.
Open 2 Opens the selected item for editing.
Delete 3 Deletes/moves the selected item(s) to the TrashCan folder.
Purge 4 Permanently deletes the selected item(s) from the TrashCan folder.
Undelete 5 Restores the previously deleted item from the TrashCan to its previous
location in the hardware hierarchy.
Search 6 Searches the database for objects that match specified criteria.
Where Used 7 Searches the database to find where an object is used by another object
in the system.
Find 8 Quick name search for items in the database.
Map Remote 9 Allows the connection to a remote system.
System
Disconnect 10 Disconnects from mapped remote system.
Remote System
Table 2-1. Right-Click Menu, Operation Menu Bar, Operation Tool Bar Items (Cont’d)
Toolbar
Menu Item Description
Button
Compile 11 Compiles the selected diagram/macro or folder of diagram/macros.
Control 12 Opens Control Builder options dialog box. Refer to “Ovation Control
Options Builder” (WIN80) for option descriptions.
Load 13 Loads database and control contents to the specified Ovation target
drop.
Download 14 Downloads configuration and diagram files to one or more specified
Ovation target drops.
Reconcile 15 Reconciles the database against a specified Ovation target drop.
Clear 16 Clears application data (originated and received points lists and control
information) from the specified Ovation target drop.
Reboot 17 Reboots the selected Ovation drop.
Import 18 Imports objects into the database (context sensitive on the types of
objects imported).
Export 19 Exports the selected item from the database.
Refresh 20 Refreshes the hierarchy (Not in the Operation Tool Bar).
Allow Docking 21 Places current window in one fixed position (Only in the Right-click
menu).
Hide 22 Closes current window (Only in the Right-click menu).
Menu Description
File Print Setup - changes the printer and print options.
Print - prints the selected tab in the active document.
Print All - prints all the tabs in the active document.
Print Preview - displays the active document as it will appear printed.
Save As - saves the currently selected dialog box to a file.
Exit - exits the Developer Studio application.
Edit Undo - undoes the last action.
Cut - cuts the selection to the clipboard.
Copy - copies the selection to the clipboard.
Paste - pastes the clipboard contents.
Select All - selects everything in an active document.
Operation See Table 2-1 for the descriptions of the menu items.
Browse Expand Child - shows all child items of a selected item.
Collapse Child - closes all child folders of a selected item.
Expand All - shows all items up to the leaf nodes.
Collapse All - closes all folders and shows only the root node.
View Workbook Mode - provides tabs for each functional dialog box opened in the
Workspace window.
Full Screen Mode - increases workspace size by eliminating all menu and menu bars.
Customize Toolbar - opens the Customize Toolbar dialog box.
Overview Window - displays or hides the Overview window.
WorkPad Window - displays or hides the Workpad window.
Status Bar - displays or hides the Status bar.
Lookup List As - displays objects in the Workpad window in single columns, multiple
columns, or as icons.
Icons - changes the appearance of the folders and objects listed in the WorkPad
window.
Single column - lists the folders and objects in the WorkPad window in one
vertical column.
Multi-column/Vert. - lists the folders and objects in the WorkPad window
several vertical columns.
Multi-column/Horiz. - lists the folders and objects in the WorkPad window in
several horizontal columns.
Menu Description
Window Close - closes the active window in the Workspace.
(only available Close all - closes all windows open in the Workspace.
when window is Next - if several windows are open in the Workspace, Next activates the next window
in workspace) in the sequence.
Previous - if several windows are open in the Workspace, Previous activates the
previous window in the sequence.
Cascade - stacks all windows is the Workspace diagonally, with the active window
always in front.
Tile Horizontally - stacks all windows horizontally in the Workspace. Double click a
window's Title bar to activate it.
Tile Vertically - stacks all windows vertically in the Workspace. Double click a
window's Title bar to activate it.
Help Contents and Index - displays the online Help for Ovation Developer Studio.
About Ovation DevStudio - displays program information, version number and
copyright.
2-3.3. ToolBars
The Tool bars in the Developer Studio provide tools to perform several tasks. There
are four Tool bars: Standard, Operation, Browse, and Windows. Each of the Tool
bars and the button functions are described below.
Another type of Tool Bar, the WorkPad Tool Bar, can be found at the bottom right
hand side of the screen just above the WorkPad Window. The WorkPad Tool Bar is
described in Table 2-6
1 2 3 4 5 6 7 8
Button Description
1 Print Setup - changes the printer and print options.
2 Print - prints the active document.
3 Undo - undoes the last action.
4 Cut - cuts the selection to the clipboard.
5 Copy - copies the selection to the clipboard.
6 Paste - pastes the clipboard contents.
7 Help - displays the online help.
8 About (About Ovation DevStudio)- displays program information, version number and
copyright.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Note
1 2 3 4 5
Button Description
1 Expand Child - shows all child items of a selected item.
2 Collapse Child - closes all child folders of a selected item.
3 Expand All Items - shows all items up to the leaf nodes.
4 Collapse All - closes all folders and shows only the root node.
5 Refresh - refreshes the hierarchy.
1 2 3 4 5 6 7
Button Description
1 Close Window - closes the window.
2 Close All Windows - closes all the open windows.
3 Next Window - activates the next unlocked window.
4 Previous Window - activates the previous unlocked window.
5 Cascade - arranges the windows as overlapping tiles.
6 Tile Horizontally - arranges the windows as horizontal, non-overlapping tiles.
7 Tile Vertically - arranges the windows as vertical, non-overlapping tiles.
1 2 3 4
Button Description
1 Icons - Changes the appearance of the folders and objects listed in the Workpad window.
2 Single Column -Lists the folders, objects in the WorkPad window in one vertical column.
3 Multi-column/Vertical - Lists the folders and objects in the WorkPad window in several
vertical columns.
4 Multi-column/Horizontal - Lists the folders and objects in the WorkPad window in
several horizontal columns.
Tool bars can be added or removed from the Developer Studio so that the screen can
be customized. To add, move or remove Tool bars or buttons, follow the procedures
below.
1. Select View from the Menu bar and choose Customize Toolbar. The
Customize dialog box appears (see Figure 2-10).
2. Select the Tool bars that you want to appear in the Developer Studio tool bar,
and deselect the Tool bars you want to remove.
3. You can select or deselect Show Tooltips, Cool Look (if Cool Look is checked,
the tool bars are smooth; if unchecked, the buttons on the tool bars are raised),
or choose small or Large Buttons.
4. Selecting the New button allows the creation of a new tool bar.
5. In order to add, delete or move buttons on the tool bars, select the Commands
tab.
6. Press Apply (if changes were made), then press the OK. The Tool bars that you
selected appear in the Studio, while the others have been removed.
Note
Figure 2-15 is an example of a dialog box. The title bar is at the top of the dialog
box. The window is the workspace in the dialog box and contains the fields of the
dialog box, which can either contain information or require data entry. Selecting
different tabs opens new windows within the dialog box. The buttons provide the
functionality of the dialog box, and they are described in Table 2-7.
Title bar
Buttons
Fields
Window
Tabs
Button Description
Ok Saves changes to the database and closes the dialog box.
Apply Saves changes to the database but the dialog box remains open.
Cancel Cancels any changes made and closes the dialog box.
Refresh Updates the dialog box to match current system settings or readings.
Locate Not applicable.
• Per field basis ensures valid data type and range as the input is entered. For
example, fields are limited in the number of characters or the types of characters
entered.
• Per object basis ensures that various fields make sense in combination with
each other. The checking of objects is performed as objects are added to the
database. If inconsistencies are discovered, the Developer Studio displays an
Alert window indicating the problem, as shown in Figure 2-16.
• Inter-object or system basis checks ensures that the information in the newly
modified object is consistent with the other objects in the system. An example
of this is the check for duplicate point names within the same unit.
• Ovation points
• Holding registers
• Control sheets
Procedure
3. Locate the objects that need attention as indicated by the Dynamic Status
markers.
Dynamic Displays
Status Ovation
Indicator Diagnostics
Window
4. Left-click the down arrow that appears after the object name.
The Ovation Diagnostics window that is applicable for that object will appear.
Use the following procedure to download the changes to the drop of your choice:
3. Right-click on the folder of the drop where you wish to view the changes and
select Download from the pop-up menu (see Figure 2-20). The Right-click
menu will only display items that are applicable for that drop.
• If this is a redundant drop, the “Select a drop to download” will appear (see
Figure 2-21). Select the drop to download and continue with Step 5.
5. The Download Preview window appears (see Figure 2-22). The Download
Preview window lists any files that may have been altered during configuration.
You can select which of these files that you would like to include in the
download process by placing a check in the box next to the file.
Note
Table 2-8 explains the options available in the Download Preview window.
Item Description
Select All Selects all of the files previewed in this window.
Clear All Deselects all of the files previewed in this window.
Download When checked, this action downloads all of the selected previewed
files after pressing the Ok button.
Reboot When checked, this action shuts down the workstation and then
restarts the drop after the Ok button is selected.
Abort Aborts the download process and returns to the Ovation Developer
Studio without executing any commands.
Ok Executes the settings and closes the window.
Skip to Next Drop This button advances to the next drop for file preview. (The current
drop is not downloaded.)
A download at the System level will allow you to select any of the drops under the
system to be downloaded. A download at the Network level will allow you to select
all of the drops under the network to be downloaded. A download at the Unit level
allows you to select all of the drops under the unit to be downloaded.
Procedure
You can download configuration changes to multiple drops using the following
procedure:
3. Right-click on the System Name folder (or appropriate level such as Network
Name or Unit Name).
4. Select Download from the right-click pop-up menu (see Figure 2-20). A Drop
Preview window appears (see Figure 2-23).
Note
6. Select Ok to download these Drops. You may abort the download by choosing
Abort in the Drop Preview window (see Figure 2-23).
Note
3. Right-click on the folder of the drop you want to reboot and select Reboot from
the right-click pop-up menu (see Figure 2-24). The Right-click menu will only
display items that are applicable for that drop.
Note
• For redundant Drop configurations, the “Select a drop to reboot” dialog box
appears (see Figure 2-25), select the drop to reboot and click Ok.
5. Click Yes to close the window and execute the reboot process.
Procedure
Use the following procedure to load the application information to the drop:
3. Right-click on the appropriate Drops folder, and select Load to perform the
load.
If the drop is redundant, the “Select a drop to load” dialog box appears. Select
the appropriate target drop, then select Ok.
Procedure
Use the following procedure to clear the application information from the drop:
If the drop is redundant, the “Select a drop to clear” dialog box appears. Select
the appropriate target drop, then select Ok.
After the action is complete, the system will automatically reboot and the
application information will be cleared from the drop.
Procedure
Use the following procedure to reconcile the originated points and Controller drop
changes to the drop of your choice:
If the drop is redundant, the “Select a drop to reconcile” dialog box appears.
Select the appropriate target drop, then select Ok.
Communications are established at the target drop and the Reconcile dialog box
appears (see Figure 2-30).
Note
5. Check for items that have differences and that can be reconciled listed in the
Difference(s) Found field.
6. Highlight the points or the specific field of points by expanding the points
folders that need to be uploaded from the target to the database.
7. Select Ok to copy the target’s point/field values to the database (reconcile) and
close the dialog box, or select Apply to reconcile the items, requery the
database, and refresh the dialog box.
All objects in the system can be searched. Searches are performed downward in the
tree structure. A search at the unit level will query the database for information only
about that unit and drops and points associated with that unit. The search will not
query other units or networks in the system. If the search is performed at the system
level, all networks and units in the system will be queried.
Procedure
Note
2. Choose the type of object to search for from the menu and select Next. The
Search Options Wizard Step 2 appears as shown in Figure 2-33.
• Find all items searches the database for all instances of the object and lists
them in the Search: Item: dialog box (see Figure 2-35).
• Find specific items using search clauses allows you to set up search
criteria such as limits and restrictions using the Search dialog box, as shown
in Figure 2-34. Table 2-9 explains the fields of the Search dialog box.
Search
Window
Search
Criteria
Window
Item Description
Search Window Displays the search criteria selected.
Search Criteria Window Area where a limiting clause is created.
Attribute Pull-down menu that contains attributes of the object to be searched.
Condition Pull-down menu that contains conditional text used to create a
limiting clause.
Value Enter the name, location, etc. used to search for the object.
Add After specifying a limiting clause in the Search Criteria window, use
this button to add it to the Search window and set it as the criteria with
which to search.
Delete Removes the selected limiting clause from the Search window.
• Use the percent symbol (%) to match the text you entered plus additional
characters included in the object.
• To match the % or _ literally, precede the character with \ (back slash) For
example, to find the title Drop%, type Drop\% in the Find What field.
Note
Items
Found
Item Description
item(s) found Indicates how many items were found in the search.
Object column Lists, by name, the objects found in the search.
Search Again Opens the Search dialog box enabling you to modify the search
criteria.
Add Column(s) Adds columns that detail attributes of the objects listed in the Object
Column.
Refresh Column(s) Refreshes the data in the columns.
11. To expand or limit the search, select the Search Again button and the Search
dialog box appears as in Figure 2-34. Review Step 5 through Step 10 of this
section to perform the Search Again option.
12. Select Add Column(s) and the Add Columns dialog box appears, as shown in
Figure 2-36.
13. Highlight the columns to add to the Search: Object dialog box and select Ok.
The columns are added to the Search:Object dialog box, as shown in
Figure 2-37.
Additional functions that can be performed in the Search: Object: dialog box
include:
• Double click on the object name in the Object column to open the record.
• Make global changes to columns by entering the new information to one cell,
and using the right-click to copy the new information and paste it to the entire
column.
• Select the Ok button to add any changes made in the Search: Object: dialog box
to the database.
• Click on a column heading to sort the list alphabetically, based on the selected
column.
• As for all dialog boxes in the Studio, the search results can be printed or saved
to a file via the File menu.
Dynamic Attributes
The Search dialog box (Figure 2-34) typically displays an object’s attributes in a
pull-down list. Some objects (such as I/O modules) have dynamic attributes that are
displayed in a text field instead of a pull-down list.
Attributes for an I/O module will be displayed in the text field. The virtual location
and the module name (type) will be displayed in the following format (refer to
Section 7 for additional information about I/O):
If you want to change the module’s virtual location, you can do this in the text field.
Change only the location numbers and leave the module name blank. After you
apply the changes, the database will accept the new location, and when you call the
dialog box again, the module name will appear.
Caution
Procedure
Use the following procedures to find out where objects are used in the Ovation
system.
1. Access the System Tree and right-click upon the item that you want to
determine where it is used and select Where Used (see Figure 2-38). The
Where Used Wizard appears, as shown in Figure 2-39.
• Select Find all references to (selected object) and its children, outside
of (selected object) folder to show the item and the referenced children of
the selected item -- but only those referenced outside of the item itself.
For example, you can find all references to a drop’s points which are made
outside the drop.
3. If the first option (Find all references to <XXXX>) was selected, the following
dialog box will appear. Refer to Table 2-11 for column descriptions.
4. If the second option (Find all references to <selected object> and its children,
outside of <selected object>) was selected, the following dialog box will appear.
Refer to Table 2-11 for column descriptions.
Figure 2-41. Where Used Dialog Box (selected object and its children)
Column Description
Object Object in System Tree that references the selected item. Click this button to open the
item’s configuration dialog box.
Type Describes the referencing object.
How Used Describes how the referencing object uses the selected item.
Path Describes where the referencing object is located in the system.
Who Selected item or its child that is being referenced. Click this button to open the item’s
configuration dialog box.
Who Type Describes the referenced Who item.
Procedure
1. Right-click a folder at the level you want to begin searching for the object.
Because the search was initiated in the Networks folder at the System level in
Figure 2-42, all objects that fall below the Ovation system folder in the file
structure are available for query. The Find: All Objects dialog box appears as
shown in Figure 2-43.
2. In the Find What field, enter the name of the object or part of the name of the
object you are looking for. Utilize wildcards to help broaden or narrow your
search:
• Use the percent symbol (%) to match the text you entered plus additional
characters included in the object.
• To match the % or _ literally, precede the character with \ (back slash) For
example, to find the title Drop%, type Drop\% in the Find What field.
3. Select Find in Hardware to locate the object wherever it occurs in the entire
database or select Find in <current folder> to locate occurrences of the object
beneath the folder where you began the search.
4. Select Find Now and the fields are populated with objects found, as shown in
Figure 2-44.
Note
Note
Procedure
1. Access the Ovation Developer Studio and select the desired sheets.
2. Select the Export item from the Right-click menu. The Ovation Export
Graphics window appears.
• Networks folder — contains all the networks in a system (details in Section 5).
• Units folder — contains all the units in a network (details in Section 6).
• Drops folder — contains all the drops in a unit (details in Section 7).
• Points folder — contains all the points in a drop (details in Section 8).
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Graphics
I/O Devices
Drops Folder Control Components
Control Tasks
Holding Registers
Points
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
If there were multiple systems, each system would appear in the Systems folder and
would provide for the following configuration for each system:
• Licenses
• Security
• Ancillary
• Point Groups
• Configuration
• Graphics
• Networks
Note
If there were multiple networks, each network would appear in the Networks folder
and would provide for the following configuration for each network:
• Configuration
• Graphics
Note
If there are multiple units, each unit would appear in the Units folder and would
provide for the following configuration for each unit:
• Configuration
• Graphics
Note
Drop Types
• Controller
• Sim Controller
• Operator Station
• Base Station
Note
• Create an entire system using the Ovation Developer Studio. Although this
method is time consuming and involves much user input, it is helpful in
understanding the operation of the Developer Studio. Section 3-4 provides an
example of how to create an entire system.
• Import data from an existing Oracle database source. This data could be in the
following forms:
— Ovation 2.x Developer Studio Export File (used with a Windows system).
These files can be imported into the system through the use of the import tools.
Use caution when importing this data and be aware of what information you are
introducing into your system. Different database import files might provide only
part of the information required for system configuration. You would need to use
the Ovation Developer Studio to provide the missing data.
For example, each drop must have a Drop Status (DU) point record type defined. If
your imported database does not contain a DU point, then you must define one.
Note
2. Right-click the System object and select Insert New. The Insert New System
Wizard appears as shown in Figure 3-2.
3. Type a System Name (up to eight characters) in the System Name entry field.
This example uses the name Ovation. Do NOT use the following invalid
characters in a System name: period (.), dollar sign ($), percent sign (%), pound
sign (#), at sign (@), and a space.
5. Select Finish and the New Systems dialog box appears (see Figure 3-3).
6. Check that the settings are correct in the New Systems dialog box.
8. Ensure that the new system subfolder is created in the System object and that it
contains all the necessary folders - Licenses, Security, Ancillary, Configuration,
Graphics, Networks, and Point Groups (see Figure 3-4). Detailed information
about Systems is provided in Section 4.
4. Select Finish and the New Networks dialog box appears (see Figure 3-6).
5. Check that the settings are correct in the New Networks dialog box.
7. Ensure that the subfolder with the new Network name is created in the Network
object, and that it contains all the necessary folders - Configuration, Graphics,
and Unit (see Figure 3-7). Detailed information about Networks is provided in
Section 5.
2. Type a Unit Name (up to six characters) in the Unit Name entry field. This
example uses the name Unit1. Do NOT use the following invalid characters in
a System name: period (.), dollar sign ($), percent sign (%), pound sign (#), at
sign (@), and a space.
4. Select Finish and the New Unit dialog box appears (see Figure 3-9).
5. Check that the settings are correct in the New Unit dialog box.
7. Ensure that the subfolder with the new Unit name is created in the Network
object, and that it contains all the necessary folders - Configuration, Graphics
and Drops (see Figure 3-10). Detailed information about Units is provided in
Section 6.
2. Type a Drop ID in the Drip ID entry field. This example uses the ID Drop1.
3. Select a Partner ID if the drop will have a partner drop. Drop51 is the Partner
Drop to Drop1 in this example.
5. Select Finish and the New Drops dialog box appears (see Figure 3-12).
6. Enter the IP Address and Ethers Address for Controllers for both the Primary
and Partner drops.
7. Check that the settings are correct in the New Drop dialog box.
Ensure that the subfolder with the new Drop name is created in the Unit object,
and that it contains all the appropriate folders for the drop type
(see Figure 3-13).
9. The folders created under a drop are specific to the type of drop created see
Table 3-1:
10. Within the Drops object, open the Points subfolder. Notice that the file structure
for the points object already exists (see Figure 3-14). For information on
creating points, refer to Section 8.
After inserting the Drops object, the basic structure of the System Tree is complete.
The dialog boxes and tools necessary to build a complete system are in place.
Section 4 through Section 8 will discuss the tools and functional dialog boxes
contained in each folder.
Configurations made at the Systems level default down through the Networks, Units
and Drops levels. Any configurations changed at a lower level will also default
down through its subfolders and lower levels. The configuration defined at the
lowest level takes precedence in its subfolders.
For example, if an alarm configuration change is made at the unit level, it will affect
all alarms in that unit and in all the drops contained in the unit. However, the change
does not affect other units in the network or system.
• Section 4-5 discusses licenses relating to the Ovation software as found in the
Licenses folder.
• Section 4-6 covers establishing security for the system using the Security folder.
• Section 4-8 discusses the tools and functional dialog boxes in the Configuration
folder.
• Section 4-9 introduces the Graphics folder and how to find out more information
about it.
• Licenses
• Security
• Ancillary
• Point Groups
• Configuration
• Graphics
• Networks
Note
Each of these folders will be discussed in more detail throughout this section.
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Points
I/O Devices
Drops Folder Control Components
Control Tasks
Holding Registers
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
All parameters and configurations set on the system level default throughout the
system. Working at the system level makes it easy to generically configure
parameters and graphics throughout the Developer Studio. All configurations made
at the system level are available to every drop and every point setting throughout the
environment. Not all Ovation configuration information can be specified at the
system level. There is some configuration information which must be specified for
each drop.
2. Select Insert New. The Insert New System dialog box appears as shown in
Figure 4-2.
3. Type a System Name (up to eight characters) in the System Name entry field.
Do NOT use the following invalid characters in a System name: period (.),
dollar sign ($), percent sign (%), pound sign (#), at sign (@), and a space.
4. Select a System Value by clicking the appropriate radio button. At this time,
only one system can exist, but it can be assigned any value.
5. Select Finish and the New System dialog box appears (see Figure 4-3).
6. Check that the settings are correct in the New System dialog box.
8. Ensure that the new system object is created and that it contains all the necessary
sub-folders - External System Interface, Licenses, Security, Ancillary, Point
Groups, Configuration, Graphics, Network.
1. In the System Tree, open the System object to display the folder with the
System name.
2. Right-click on the system object to be updated and select Open. The System
dialog box appears.
2. Right-click on the [Remote] object and select Insert New. The Insert New
[Remote] Wizard appears.
3. Enter the information for the Remote network select Finish. The New [Remote]
dialog box appears
Note
2. Right-click on the Remote Data Servers object and select Insert New. The New
Remote Data Servers dialog box appears.
3. Define the data servers that reside on the remote network, select Apply.
Note
2. Right-click on the Remote Network object and select Map Remote System.
The Map Remote System Wizard appears.
3. Select either read/write or read only access. If read/write access is required you
must enter the appropriate password to obtain this access. Otherwise, you will
be granted read only access.
4. Select Finish.
2. Right-click on the [Local] object and select Insert New, the Insert New [Local]
Wizard appears.
3. Fill in the Network Name Alias and select Finish. The “New [Local]” dialog
box appears (the local Network Number Alias is always 0.) The Alias entered
here is to allow a remote network to distinguish one remote network from
another.
4. Fill in the Remote Database Access - Password, then select the Apply button.
Note
2. Right-click on the Local Data Servers object and select Insert New. The New
Local Data Server dialog box appears.
3. Choose the Machine Name (Drop). The IP Address is automatically filled in,
then select the Apply button.
Note
2. Right-click on the [Local Alarm Collectors] object and select Insert New.
3. Choose the Machine Name (Drop) and IP Address, then select Apply.
Use the preceding steps (Section 4-4.4 - Section 4-4.6) to define all of the servers
you want to interface with.
Note
2. Right-click on the External Alarm Collector Networks object and select Insert
New. The Insert New External Alarm Collector Networks Wizard appears.
3. Select the Remote Network that the alarm data is to be retrieved from. This
select list is populated from the remote networks defined under ESI\[Remote].
Check for the proper Network Number Alias, then select Finish. The “New
External Alarm Collector Networks” dialog box appears.
4. Select the primary and secondary Remote Data Servers the alarm collector will
connect to in order to receive alarm data. The Primary and Secondary data
server select lists are populated with the remote data servers defined for the
specified remote network. The configuration for these data servers under
External System Interface\[Remote]\(Remote Data Servers). This information
is defined in the remote Network as Data Servers.
5. Fill in information for at least the Primary section and select Apply. The remote
network can now be accessed and used from the local network.
The License folder is only located at the System level. When the License folder is
opened, the Ovation License Manager is started. The Ovation Database Server is
also defined as a System License Server.
Licenses are stored on the License Server and manage the access to the Ovation
Developer Studio. As you log into the Studio, licenses are retrieved from the
License server. When a license is accessed by one you, that license becomes locked
so no other user can access it. Licenses remain locked as long as they are in use. If
all licenses are in use, you must wait until a license becomes available.
• Floating licenses
Fixed licenses provide limitations on the size of an Ovation System, such as the
number of certain types of drops in the system. The Developer Studio will prevent
you from adding or configuring any Ovation drops when the licensed limit has been
reached.
Note
The License Manager displays the details of the Ovation license. For example, it
reports the quantity of each Ovation drop type, Remote Network, and Data Server
that can be configured and utilized. For floating licenses, the License manager
reports the total number of users who may simultaneously execute an Ovation
engineering application, as well as where and by whom the applications are being
executed, such as User:Adminisrator@host:drop 200.
The license codes, called code keys, are obtained from Emerson Process
Management and entered into the system using the License Manager. The License
Manager can be accessed through the System object, as well as through the warning
boxes indicating that you have been locked out (see Section 4-5.1).
Note
There are two warning boxes that may appear: the Ovation Developer Studio Alert
warning box and the Licenses Error message.
The Ovation Developer Studio Alert dialog box, as shown in Figure 4-14, appears
when there are no Developer Studio licenses available. When this dialog box
appears you must wait for a license to become available. Select the Details button
to view license-specific information.
If the Ovation Developer Studio Alert dialog box appears regularly, contact your
network administrator. It may be necessary to purchase more licenses.
The License error message appears only if you have gained access to the Developer
Studio. The License Error message, as shown in Figure 4-15, appears when you
attempt to open a feature that has no licenses available.
• Select the License Manager button to access the License Manager, as shown
in Figure 4-16.
1. Open the Systems folder to display its subfolders in the Overview window.
3. Select Licensing from the WorkPad window. The License Manager will appear
as displayed in Figure 4-16.
License Manager
The License Manager provides the tools necessary to view license details, add new
licenses, and establish commuter licenses for laptops. There are two types of
licenses - the trial license and the normal license. The trial license is a ten-day
license that, when expired, locks the software until the normal license is purchased
and the key code entered.
Server Feature
List Details
Window Window
Client
Details
Window
Operations
Tabs
• Server List window — Displays where the software and licenses reside. It also
lists the features Ovation Power Tool (OVPT), Ovation Control Builder (OCB),
and Graphic Builder (GBNT) and their subfolders.
• Client Details window — Provides details about the client, including user
name, host name, start and end time.
— Query Options
— Environment
— License Key
— Commuter.
Unless there are multiple License Servers in the system, the Query Options tab will
not be utilized. The operations of the Query Options tab are explained in Table 4-1.
Function Description
All in Subnet Queries any license server drops.
(Server Options)
LSHOST list Provides the drop name of license server. All software shipped from Emerson
(Server Options) uses this field.
Environment Tab
The Environment tab (see Figure 4-18) provides information about the drops and
licenses. This information is usually requested by Emerson customer service
representatives and is not necessary for daily operations.
The License Key tab is only available when accessed from a licensed server. This
tab provides information necessary to retrieve license codes from Emerson and the
field to enter the license key code to activate applications.
Refer to Figure 4-19. Notice in the License Key tab that the Server drop number and
the Locking Criteria are provided. The Locking Code, which is highlighted in
yellow on the screen, must be given to Emerson in order to receive the valid license
key code. The Key Code unlocks purchased services on the Ovation Developer
Studio.
1. Select the License Key tab from the Options area of the License Manager. The
License Key tab appears as shown in Figure 4-19.
Note
Note
The Commuter tab allows you to sign out a license from the server to a laptop
computer for a period of up to 30 days. By signing out a license to a laptop, the
laptop is able to operate Ovation Developer Studio software.
The signed-out license becomes locked on the server. No one can use that license
until it is either signed back in or 30 days passes.
At the end of the 30 days, the commuter license on the laptop times out and locks
the Ovation application on the laptop. On the server, the license lock is released,
freeing up that license for other users.
Use the following procedures to check out a license for a laptop computer.
7. Enter the number of days desired until the license expires (if less than 30).
Thirty days is the maximum time a license can be signed-out.
Whenever security objects are added, modified, or deleted, they are automatically
propagated to the distributed databases on each operator station. The net result is
that modifications to security objects are automatically propagated to the system
workstations. New security information on each workstation takes effect upon the
next workstation login/logout operation.
The ability to access secure Ovation functions and data is dictated by the security
session to which the software belongs. A session is defined by the currently logged-
in user, the roles to which that user belongs, the particular drop on which the
software is operating, and the applicable display (that is, the drop console or a
specified remote drop).
For example, MMI applications displayed on the drop console(s) have access to
Ovation system functions and data as dictated by the currently logged-in user and
the particular drop. An Ovation user who remotely logs into the drop (as well as
remotely displayed MMI applications) will have a separate security session with a
potentially different level of access to Ovation system functions and data.
The Security folder provides the following dialog boxes to configure the security for
the Ovation system:
1. Open the Systems object to display its subfolders in the Overview window.
Figure 4-21 below is an example of the Point Access dialog box. Table 4-2 describes
the fields of the dialog box.
Refer to Figure 4-22 for an example of the Users dialog box. Notice that there are
three tabs across the bottom — Config, Point Access, and System Functions.
Figure 4-22 displays the Config tab. Use the Config tab to set securities relating to
the user and roles. Refer to Table 4-3 for explanations of the fields.
Figure 4-23 shows the Point Access tab. Use the Point Access tab to set Security
Groups. Refer to Table 4-3 for explanations of the fields.
The System Functions tab is shown in Figure 4-24. Use the System Functions tab
to set specific system function securities. Refer to Table 4-3 for explanations of the
fields.
Refer to Figure 4-25 for an example of the Roles dialog box. Notice that it has three
tabs across the bottom — Config, Point Access, and System Functions.
Figure 4-25 shows the Config tab. Use the Config tab to create the role. Refer to
Table 4-4 for explanations of the fields.
Figure 4-26 shows the Point Access tab. Use the Point Access to specify secure
point group access for the role. Refer to Table 4-4 for an explanation of the fields.
Figure 4-27 shows the System Functions tab. Use the System Functions tab to grant
role access to system functions. Refer to Table 4-4 for an explanation of the fields.
Note
Refer to Figure 4-28 for an example of the Drops dialog box. The Drops dialog box
has five tabs across the bottom — Config, Point Access, Remote Point Access,
System Functions, and Remote System Functions.
Figure 4-28 shows the Config tab. Use the Config tab to select the default user of
the drop. Refer to Table 4-5 for explanations of the fields.
Figure 4-29 shows the Point Access tab, which is a list of local point security
groups. Refer to Table 4-5 for explanations of the fields.
Figure 4-30 shows the Remote Point Access tab, which is a list of remote point
security groups. Refer to Table 4-5 for explanations of the fields.
Figure 4-30. Remote Point Access Tab in the Drops Dialog Box
Figure 4-31 shows the System Functions tab, which is a list of defined, security
Ovation functions. Refer to Table 4-5 for explanations of the fields.
Figure 4-32 shows the Remote System Functions tab, which is also a list of defined,
security Ovation system functions. Refer to Table 4-5 for explanations of the fields.
Figure 4-32. Remote System Functions Tab in the Drops Dialog Box
Note
Refer to Figure 4-33 for an example of the Default Drops dialog box. The Default
Drops dialog box has five tabs across the bottom - Config, Point Access, Remote
Point Access, System Functions, and Remote System Functions.
Figure 4-33 shows the Config tab. Use the Config tab to enter the default user name.
Refer to Table 4-6 for explanations of the fields.
Figure 4-34 shows the Point Access tab, which is a list of point security groups.
Refer to Table 4-6 for explanations of the fields.
Figure 4-34. Point Access Tab in the Default Drop Dialog Box
Figure 4-35 shows the Remote Point Access tab, which is a list of remote point
security groups. Refer to Table 4-6 for explanations of the fields.
Figure 4-35. Remote Point Access Tab in the Default Drop Dialog Box
Figure 4-36 shows the System Functions tab, which is a list of defined, secure
Ovation functions. Refer to Table 4-6 for explanations of the fields.
Figure 4-36. System Function Tab in the Default Drop Dialog Box
Figure 4-37 shows the Remote System Functions tab, which is also a list of defined,
secure Ovation system functions. Refer to Table 4-6 for explanations of the fields.
Figure 4-37. Remote System Function Tab in the Default Drop Dialog Box
Procedures
1. In the System object, open the Security subfolder to display the list of Security
folders.
2. Open the specific security folder that needs to be updated, and the security
objects appear in the Workpad window.
3. Right-click on the security object to be updated and select Open. The security
dialog box appears.
Ancillary
Label
Information
There are 11 Ovation point record types. Figure 4-38 shows an Analog Point type
and its ancillary label information. Different Ancillary labels can be created for
each point type.
For example, in this system, every Analog point supports the ability to specify
information regarding the drop cabinet name, department where the drop resides
and additional hardware attached to the drop, as in Figure 4-38 above. This
information, in text form, has no bearing on the operation of the point, but it may
be necessary or helpful for administrative purposes.
Note
2. Select a Point Labels object from the WorkPad window. The Analog Points
label will be used for this example. The Analog Points Labels dialog box
appears as shown in Figure 4-39.
3. Type in the title to be used as the Ancillary data label for the object. For
example, Drop Cabinet Name: in the Value Column in row Field 1 Label
(maximum length of 30 characters in each “Value” field).
5. Type Additional Hardware: in the Value Column in row Field 3 Label. The
dialog box should appear as it does in Figure 4-40.
6. Select Apply or OK. For each Analog Point created, the labels will be included in
the Analog Point dialog box, Ancillary tab, as illustrated below in Figure 4-41.
Only fields with information entered will appear in the points dialog box.
Procedure
1. In the System object, open the Ancillary subfolder to display the list of
Ancillary objects in the Workpad window.
Configurations made at the System level default down through the network, unit and
drops. Any configurations changed at a lower level will also default down through
its subfolders. The configuration defined at the lowest level takes precedence.
For example, if an alarm configuration change is made at the unit level, it will affect
all alarms in that unit and in all the drops contained in the unit, providing drops in
that unit do not have a drop specific alarm object. However, the change does not
affect other units in the network or system.
The Point Processing configuration folder resides in the Developer Studio System
Tree (see Figure 4-42).
The Point Processing dialog box defines the configuration used during Point
Processing such as user definable frequency, and manually entered quality. Access
this folder when the you would like to process points at a quality and rate other than
the default settings.
Procedure
2. Open the Point Process Config file in the Point Processing folder (see Figure
4-42) and the Point Processing dialog box appears (see Figure 4-43). Table 4-7
explains the topics available in the Point Processing dialog box.
3. Enter the desired changes and select Apply or Ok to accept the changes.
4. The changes must be downloaded and the drop must be rebooted before the new
settings will take effect.
Using the Image Builder, you can apply the default icon settings to your System
Tree and replace many of the folder icons with images more relevant to the
particular class (for example, Analog Points). The Image Builder is only located at
the System level.
In addition to the default icon settings, you can use the Image Builder to import a
variety of other icons to associate with classes in the System Tree. You can import
any image saved as an.icon file into the image dictionary and use it as a class icon.
1. Access the System icon and open the Configuration folder. Select the
ImageBuilder folder.
2. Check the Workpad window to ensure that there is no Image Builder Dictionary
file already created (OvPTClsImage.ild). If the file already exists, simply open
the dictionary (Section B-2).
4. Select the Finish button, and the Ovation Image Builder Wizard appears.
5. Select the Next button and the Image Builder Dictionary dialog box appears as
shown in Figure 4-46. Now the Image Dictionary icon appears in the WorkPad
window.
The dictionary contains icon files associated with database classes by default.
These default settings can be edited, and additional icons can be added to the
dictionary. Section C through Section G provides information on editing the
dictionary.
1. Access the System icon and open the Configuration folder. Select the
ImageBuilder folder.
2. Check the Workpad window to ensure that there is an Image Builder Dictionary
already created (OvPTClsImage.ild). If there is no file, insert one (see Section
A).
3. Double click the Image Dictionary icon in the WorkPad window and the
Ovation Image Builder Wizard opens.
4. Select Next and the Image Dictionary dialog box appears as shown below. The
following procedures describe how to edit the Dictionary.
2. Go to the Class List and select the name of the class that you want to
disassociate.
3. Open the Image drop-down menu and select None. The icon association is
removed.
4. When all the desired Image Dictionary edits have been completed, select the
Next button.
5. Select to either Save or Discard the changes by choosing the appropriate radio
button.
6. Perform a Download, shut down the Studio, and then restart the Studio to apply
the changes.
2. Go to the Class List and select the name of the class that you want to associate.
3. Open the Image drop-down menu and select the appropriate icon. The icon
association is made.
4. When all the desired Image Dictionary edits have been completed, select the
Next button.
5. Select to either Save or Discard the changes by choosing the appropriate radio
button.
6. Perform a Download, shut down the Studio, and then restart the Studio to apply
the changes.
2. Select the New button and the Select a new Icon file to Add dialog box appears.
3. Select an Icon file (.ico) and choose Open. The new icon is added to the
dictionary.
5. When all Image Dictionary edits have been completed, select the Next button.
6. Select to either Save or Discard the changes by choosing the appropriate radio
button.
7. Perform a Download, shut down the Studio, and then restart the Studio to apply
the changes.
3. Remove all Icon/Class Associations for the selected icon using the procedures
above.
4. Select the Delete button and the icon is deleted from the dictionary.
Note
5. When all Image Dictionary edits have been completed, select the Next button.
6. Select to either Save or Discard the changes by choosing the appropriate radio
button.
7. Perform a Download, shut down the Studio, and then restart the Studio to apply
the changes.
3. Notice that the “Used by” window contains a list of class associations that will
be affected by the change.
4. Select the Change button, and the Select a New Icon File to Replace dialog box
appears.
6. The new icon is added to the dictionary and replaces the previous Icon in all its
associations.
7. When all Image Dictionary edits have been completed, select the Next button.
8. Select to either Save or Discard the changes by choosing the appropriate radio
button.
9. Perform a Download, shut down the Studio, and then restart the Studio to apply
the changes.
Two diagram files (source and object) are created and edited within GBNT. The
source (.src) format is a readable ASCII representation of the diagram which
adheres to the syntax of the graphics language. The object (.diag) format is the
corresponding executable diagram file that is displayed at the Ovation Operator
Station.
All graphics set at the system level default throughout the system. Working at the
system level makes it easy to generically configure graphics throughout the
Developer Studio. All graphics established at the system level are available to every
drop and every point setting throughout the environment, unless they are overridden
at the network, unit or operator station drop level. Adding or editing graphics at a
lower level changes them for only that level and any lower level. All graphics at
lower levels override those at the higher levels.
Refer to the manual “Ovation Graphics Builder” (WIN90) for more information
about the Graphics folder.
The Point Group folder is located under the System object in the System Tree. By
creating point groups at the System level, it will be distributed to all the system
drops.
There are two types of Point Groups: Trend Point Groups and PDS Point Groups.
Trend Point Groups associate a commonly used set of points and track them over
time. PDS Point Groups create generic graphics that do not hard code points, but
rather reference points via the point group.
2. Open the Point Groups folder to reveal two subfolders: Trend Point Groups and
PDS Point Groups.
2. Right-click the Trend Point Groups folder and select Insert New. The Insert
New Trend Point Group Wizard appears, as shown in Figure 4-50.
3. Enter the trend group name in the Group Name field, using up to 30 characters.
4. Enter a group number (to define the group) in the Group Number field. The
Group Number is used to identify group information. A maximum of 5,000
groups can be defined.
Note
6. Enter the title of the trend group in the Group Title field, using up to 30
characters. The title is only a description of the point group and is not required.
7. Pull down the Grid menu to enable or disable grid lines on the trend graph.
8. Pull down the Live Trend Duration menu and select the unit of measurement.
The interval unit is specified as minutes, hours, or days. All points in a single
window use the same collection interval.
9. Complete the remaining fields of the New Trend Point Groups dialog box. The
following fields apply only to historical trends. Refer to “eDB Historian User
Guide” (NT-0070) for information about the following fields:
• Historical Type
• Range
• Historical Period
10. Select OK or Apply to add the Point Group. A subfolder will appear under the
Trend Point Group folder in the System Tree.
Points included in the Point Group are called members. Adding members to the
Point Group is done on-line, therefore, the changes take effect immediately and are
automatically distributed to the Operator Stations for inclusions in their distributed
databases.
1. In the System object, open the Point Groups folder and select the Trend Point
Groups folder. Folders for all existing trend point groups appear under the
Trend Point Groups folder.
2. Open the point group folder in which you want to add a member, and the Trend
Group Members subfolder appears. Right-click the Trend Point Groups and
select Insert New. The Insert New Trend Group Members Wizard appears, as
shown in Figure 4-52.
3. Enter the name of the point that will be added to the Trend Group in the Point
Name entry field.
4. Use the spin arrows (or type it in) to select a Rank. Rank is a number that
corresponds to the point and the value can be 0 to 7, with zero being the highest
rank and seven being the lowest rank. Higher ranked members appear at the top
of the trend graphic. The lower rank members are placed toward the bottom of
the trend graphic.
5. Select Finish and the New Trend Group Members dialog box appears, as shown
in Figure 4-53. Information added to the Insert New Trend Group Members
Wizard now appears in the Configure tab.
6. For a packed point, enter the bit number in the Bit Number field. Leave the field
empty if the point is not a packed point.
7. Select User Entered or Default from the Scale Limits pull-down menu.
This option enables you to view a trend line in lesser or greater detail. Each
trend point has its own set of temporary high and low scales.
The Default selection indicates that the points defined by default as “minimum”
and “maximum” display scales will be utilized when displayed in the trend
window, as described in “Ovation Record Types Reference Manual” (R3-1140).
The User Entered selection indicates that the trend window will utilize the
minimum and maximum display scale values defined in Step 8.
8. If desired, enter the user-defined scale values in the Scale High and Scale Low
entry fields.
• Scale High represents the top boundary of the trend. The high scale must be
represented as a positive or negative integer, floating point, or in scientific
or technical notation. (For example, scientific (1.0e2, -1.0E+2, 1.0E-2)
technical (100e0, 10e3, 10E6).)
• Scale Low represents the bottom boundary of the trend. The low scale must
be represented as a positive or negative integer, floating point, or in scientific
or technical notation. (For example, scientific (1.0e2, -1.0E+2, 1.0E-2)
technical (100e0, 10e3, 10E6).)
Note
9. Pull down the Transient menu. Selecting Yes causes the second digital average
value (0 or 1) of any 3 consecutive values in the trend data that are the same to
be changed to the opposite state if the second digital average value was not in
the same state for its entire processing period.
The transient option does not show true data, and is meant to bring out digital
state changes that would otherwise remain hidden on trends of digital points for
processing periods greater than 1 second.
A trend around the time of the digital activity should be performed, with the
processing period decreased and the transient option disabled to show the true
digital states. (This option is applicable only when the processing type is
Average Value.)
10. Pull down the Summary menu. Select Yes to include a summary section or No
to exclude a summary section. The summary consists of data for each point,
such as averages, maximums, and minimums.
11. Pull down the Processing Type menu, and select an applicable type. The types
are as follows:
• Actual Value displays the actual value of the specified process point at the
end of each individual processing period.
• Average displays the average value of the specified process point over each
individual processing period.
• Integration displays the integral of the specified process point with respect
to seconds, multiplied by the specified integration constant, over each
individual processing period.
• Minimum Value displays the minimum value of the specified process point
over each individual processing period.
• Time Set Mins displays the number of minutes which the specified digital
process point, or selected bit of a packed process point, spent in the Set state
over each individual processing period.
• Time Reset Mins displays the number of minutes which the specified
digital process point, or selected bit of a packed process point, spent in the
Reset state over each individual processing period.
• Time Set Hours displays the number of hours which the specified digital
process point, or selected bit of a packed process point, spent in the Set state
over each individual processing period.
• Time Reset Hours displays the number of hours which the specified digital
process point, or selected bit of a packed process point, spent in the Reset
state over each individual processing period.
• Toggle displays the number of state changes for the specified digital process
point, or selected bit of a packed process point, which occurred over each
individual processing period.
• Toggle Set displays the number of state changes to the Set state for the
specified digital process point, or selected bit of a packed process point,
which occurred over each individual processing period.
• Toggle Reset displays the number of state changes to the Reset state for the
specified digital process point, or selected bit of a packed process point,
which occurred over each individual processing period.
• Unpacked Bit Value displays the actual value of a selected bit of the
specified process point at the end of each individual processing period.
12. Enter the integration constant in the Integration Value field. This field is only
applicable when the processing type is Integration.
13. Select OK or Apply to add the modified or created Point Group to the Group List.
Point Trend Groups can be modified at the group level and the member level.
Group Level
1. In the System object, open the Point Group folder and select the Trend Point
Groups folder. Folders for all existing trend point groups appear under the
Trend Point Groups folder.
2. Right-click the trend points group folder that you wish to modify and select
Open. The Trend Point Group dialog box appears as shown in Figure 4-54.
Member Level
1. In the System object, open the Point Group folder and select the Trend Point
Groups folder. Folders for all existing trend point groups appear under the
Trend Point Groups folder.
2. Open the trend point group folder that contains the group member that you wish
to modify and the Trend Group Members folder appears.
3. Double click the Trend Group Members folder and the members of the group
appear in the WorkPad window.
4. Open the trend point group member that you wish to modify and the Trend Point
Group Member dialog box appears as shown in Figure 4-55.
5. Make necessary changes and select Ok to add the modified member to the
database.
2. Right-click the PDS Point Groups folder and select Insert New. The Insert
New PDS Point Groups Wizard appears, as shown in Figure 4-56.
3. Enter the PDS group name in the Group Name field, using up to 30 characters.
4. Enter a group number (to define the group) in the Group Number field. The
Group Number is used to identify group information. A maximum of 5,000
groups can be defined.
Note
6. The Group Number defaults from information entered in the New PDS Point
Groups Wizard. Enter the title of the PDS group in the Group Title field, using
up to 30 characters.
7. Enter optional text in the String fields that describes the point group.
8. The Text Group Number field allows you to attach additional text strings to the
Point Group when displaying a diagram. The valid range is 1 to 5000. Each Text
Group may contain up to 100 text strings.
9. The Diag Number field displays the number of the diagram to be loaded when
this point group is loaded. If this field is left blank or set equal to zero, then the
requested group is displayed with the current diagram. If this field is non-zero,
then the diagram of that number will be displayed with the requested group.
10. The Group Paging fields (Up Group, Down Group, Right Group, Left Group)
allow you to enter the group numbers associated with this group to be used for
paging. Enter the group numbers in the associated Group fields.
11. Select Ok to activate the new point group. A sub folder with the new PDS group
name is added to the PDS Point Groups folder.
The new point group is added (or edited) on-line; therefore, the changes take effect
immediately and are automatically distributed to the Operator Stations for
inclusions in their distributed databases.
1. In the System object, open the Point Group folder and select the PDS Point
Groups folder. Folders for all existing PDS point groups appear under the PDS
Point Groups folder.
2. Open the point group folder in which you want to add a member and the PDS
Point Groups subfolder appears.
3. Right-click the PDS Point Groups folder and select Insert New. The Insert
New PDS Group Members Wizard appears, as shown in Figure 4-58.
5. Use the arrows (or type it in) to select a Rank. Rank is a reference number that
corresponds to the point, and the value can be 1 to 249. Rank is the reference
that the graphic will use to retrieve the information to display.
6. Select Finish and the New PDS Group Members dialog box appears, as shown
in Figure 4-59. Information provided in the Insert New PDS Group Members
Wizard is displayed in the dialog box.
7. Select Ok to activate the PDS point group member. The new PDS point folder
appears in the System Tree.
PDS Point Groups can be modified at the group level and the member level.
Group Level
1. In the System object, open the Point Group folder and select the PDS Point
Groups folder. Folders for all existing PDS point groups appear under the PDS
Point Groups folder.
2. Right-click the PDS points group folder that you wish to modify and select
Open. The PDS Point Group dialog box appears as shown in Figure 4-60.
Member Level
1. In the System object, open the Point Group folder and select the PDS Point
Groups folder. Folders for all existing PDS point groups appear under the PDS
Point Groups folder.
2. Open the point group folder that you wish to modify and the PDS Point Groups
subfolder appears.
3. Double click the PDS Group Members folder and the members of the group
appear in the WorkPad window.
4. Open the PDS point group member that you wish to modify and the PDS Point
Group Member dialog box appears.
Figure 4-61.
5. Make necessary changes and select Ok to add the modified member to the
database.
2. Right-click the eDB Point Groups folder and select Insert New. The Insert
New eDB Point Groups Wizard appears, as shown in Figure 4-62.
3. Enter the eDB group name in the Group Name field, using up to 30 characters.
4. Enter a group number (to define the group) in the Group number field. The
Group number is used to identify group information. A maximum of 5,000
groups can be defined.
Note
5. Select Finish and the New eDB Point Groups dialog box appears, as shown in
Figure 4-63.
6. The Group number defaults from information entered in the New eDB Point
Groups Wizard. Enter the title of the eDB group in the Group Title field, using
up to 30 characters.
7. Select Ok to activate the new point group. A sub folder with the new eDB group
name is added to the eDB Point Groups folder.
The new point group is added (or edited) on-line; therefore, the changes take effect
immediately and are automatically distributed to the Operator Stations for
inclusions in their distributed databases.
1. In the System object, open the eDB Point Group folder and select the eDB
Point Groups folder. Folders for all existing eDB point groups appear under the
eDB Point Groups folder.
2. Open the point group folder in which you want to add a member and the eDB
Point Groups subfolder appears.
3. Right-click the eDB Group Members folder and select Insert New. The Insert
New eDB Group Members Wizard appears, as shown in Figure 4-64.
5. Use the spin button (or type it in) to select a Rank. Rank is a reference number
that corresponds to the point, and the value can be 0 to 19. Rank is the reference
that the graphic will use to retrieve the information to display.
6. Select Finish and the New eDB Group Members dialog box appears, as shown
in Figure 4-65. Information provided in the Insert New eDB Group Members
Wizard is displayed in the dialog box.
7. Select Ok to activate the eDB point group member. The new eDB point folder
appears in the System Tree.
eDB Point Groups can be modified at the group level and the member level.
Group Level
1. In the System object, open the Point Group folder and select the eDB Point
Groups folder. Folders for all existing eDB point groups appear under the eDB
Point Groups folder.
2. Right-click the eDB points group folder that you wish to modify and select
Open. The eDB Point Group dialog box appears as shown in Figure 4-66.
Member Level
1. In the System object, open the Point Group folder and select the eDB Point
Groups folder. Folders for all existing eDB point groups appear under the eDB
Point Groups folder.
2. Open the point group folder that you wish to modify and the eDB Point Groups
subfolder appears.
3. Double click the eDB Group Members folder and the members of the group
appear in the WorkPad window.
4. Open the eDB point group member that you wish to modify and the eDB Point
Group Member dialog box appears.
5. Make necessary changes and select Ok to add the modified member to the
database.
• Section 5-4 discusses the tools and functional dialog boxes in the Configuration
folder.
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Points
I/O Devices
Drops Folder Control Components
Control Tasks
Holding Registers
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
If there were multiple networks, each network would appear in the Networks folder
and would provide for the following configuration for each network:
• Configuration
• Graphics
Note
1. Access the System object. Within the System folder, right-click the Networks
subfolder and choose Insert New as shown in Figure 5-2. The Insert New
Network Wizard appears (see Figure 5-3).
2. Type a Network Name in the Network Name entry field. The Network Name
cannot exceed eight characters, and will be forced uppercase. Do NOT use the
following invalid characters in a Network name: period (.), dollar sign ($),
percent sign (%), pound sign (#), at sign (@), and a space.
3. Select 0 as the Network Value by clicking the 0 radio button. The Network
Value is the number associated with the network. At this time, only one network
can be added and its assigned value must be 0.
4. Select Finish and the New Networks dialog box appears as shown in
Figure 5-4. Table 5-1 explains the fields.
Field Description
Network Name Eight character limit. Forced uppercase. Invalid characters are period
(.), dollar sign ($), percent sign (%), pound sign (#), at sign (@), space
Network Value Column Must be set to 0.
DB Xmit Multicast Address Used internally by Ovation applications to interface to other computers-
for informational purposes only.
Alarm Multicast Address Used internally by Ovation applications - for informational
purposes only.
Simulator Multicast Address Used internally by Ovation applications - for informational
purposes only.
5. Check that the settings are correct in the New Network dialog box.
7. Ensure that the subfolder with the new network name is created in the Networks
folder, and that it contains all the necessary folders - Configuration, Graphics,
and Unit.
Procedure
Configurations made at the Network level default down through the unit and drops.
For example, if an alarm configuration change is made at the unit level, it will affect
all alarms in that unit and in all the drops contained in the unit. However, the change
does not affect other units in the network or system, and the configuration can be
overridden by setting the alarm configurations at the drop level.
The DDB configuration object is established when the Network is created. Only one
DDB configuration exists per network.
The number of DDBs can be increased at any time, but the maximum DDB size
should not be changed unless the system is going to be rebuilt. If the maximum
DDB size needs to be decreased (for example, due to a change in the network
implementation), a full import load of the system is required.
Note
Procedure
3. Right-click on the DDB object in the WorkPad window and select Open. The
DDB Configuration dialog box appears, as shown in Figure 5-5. Table 5-2
describes the fields of the DDB Configuration dialog box.
Field Description
Maximum DDB Size 4044 bytes for FDDI/CDDI. 1400 bytes for Ethernet.
Must be defined before points are added to the database.
Maximum Number of Maximum number of DDBs that can be defined for the system. Valid range
DDBs is 100 to 2048. Cannot be reduced after points have been added to the
database.
Number of Small DDBs Quantity of DDBs assigned to drop records. For informational purposes only.
Small DDB Size Size of the small DDBs assigned to drop records. For informational purposes
only.
Fast Period Periodicity of a fast point, measured in milliseconds. For informational
purposes only.
DDB Ratio Ratio of slow to fast DDBs. For informational purposes only.
Age Fast Age at which a fast point is considered to be timed out,
measured in tenths of seconds. For informational purposes only.
Age Slow Age at which a slow point is considered to be timed out,
measured in tenths of seconds. For informational purposes only.
DDB Multicast address Internal Ovation network control. For informational purposes only.
Note
Use the following procedure to insert External Network Connections for a Network,
Unit or Drop.
1. Expand the System Tree to the Configuration folder under the Units folder, open
the External Network Connections folder.
2. Right-click on the External Network Connections folder and select Insert New.
The New External Network Connections dialog box appears, as shown in Figure
5-6.
3. Select Ok or Apply.
1. Expand the System Tree to the Configuration folder under the Networks, Units
or Drops folder, open the External Network Connections folder.
2. Right-click on the External Networks object and select Insert New. The Insert
New External Networks Wizard appears.
3. Select the Remote Network, then select Finish. The New External Networks
dialog box appears
4. The proper Primary and Secondary Data Servers will automatically be filed in
using information provided when setting up the External Systems Interface in
Section 4-4. Fill in the Remote Data Information:
Point Count - Maximum number of points that can be received.
Dynamic Age - Length of time before the data is unchecked.
Refresh Period - How often info is checked.
Data Lifetime - How Long before data is purged.
5. Select Ok or Apply
Procedure
Use the following procedures to configure the NTP. NTP is automatically created
when a Network is inserted.
3. Right-click the NTP object in the WorkPad window and select Open. The NTP
Time Configuration dialog box appears, as shown in Figure 5-9. Table 5-3
describes the fields of the NTP Configuration dialog box.
Field Description
Time Server 1 Time server with which the rest of the drops in the system are
NTP (Time) Server synchronized.
Time Server 2 Back up time server to be used if Time Server 1 cannot be accessed.
NTP (Time) Server
External Time Server IP address for an external time server. This field only appears if External
Time Server is selected from the Time Server 1 or Time Server 2 pull-down
menu.
4. Select the drop to be used as Time Server 1 from the pull-down menu. If
External Time Server is selected, enter the IP address.
5. Select the drop to be used as Time Server 2 from the pull-down menu. If
External Time Server is selected, enter the IP address.
Note
Note
• Section 6-4 discusses the tools and functional dialog boxes in the Configuration
folder.
If there are multiple units, each unit would appear in the Units folder and would
provide for the following configuration for each unit:
• Configuration
• Graphics
Note
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Points
I/O Devices
Drops Folder Control Components
Control Tasks
Holding Registers
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
2. Type a Unit Name in the Value Column. The Unit Name cannot exceed six
characters, will be forced uppercase, and must be unique within the network. Do
NOT use the following invalid characters in a Unit name: period (.), dollar sign
($), percent sign (%), pound sign (#), at sign (@), and a space.
3. Select a Unit Value by clicking the appropriate radio button. The Unit Value is
the unit’s ID number and will be 0-15. The Unit must have a unique value within
the network.
4. Select Finish and the New Unit dialog box appears (see Figure 6-3).
5. Check that the settings are correct in the New Unit dialog box.
Procedure
1. In the Units folder, right-click on the Unit to be modified and select Open. The
Unit dialog box appears.
2. Make necessary changes and select Ok or Apply to add the changes to the
database.
Configurations made at the Unit level default through that unit and its associated
drops.
For example, if an alarm configuration change is made at the unit level, it will affect
all alarms in that unit and in all the drops contained in the unit. However, the change
does not affect other units in the network or system, and the configuration can be
overridden by setting the alarm configurations at the drop level.
Plant Mode is the identification of the analog point in the unit that is to be used by
Ovation Point Originators to determine which deluxe plant mode attributes are in
affect.
The deluxe analog point is created in the points folder, which is discussed in
Section 8. Instructing the unit which point is the plant mode point is done through
the Plant Mode subfolder in the Units folder.
1. In the Networks folder, open the Units folder which you want to update.
3. Right-click on the Plant Mode folder and select Insert New. The New Plant
Mode dialog box appears, as shown in Figure 6-4.
4. Type the name of the analog point to be used as the plant mode in the Value
column.
5. Make necessary changes and select Ok or Apply to add the changes to the
database.
In may be necessary to make changes to Plant Mode. Use the following procedures
to modify Plant Mode.
Procedure
2. Open the Plant Mode folder and right-click on the Plant Mode object in the
Workpad window and select Open. The Plant Mode dialog box appears.
3. Make necessary changes and select Ok or Apply to add the changes to the
database.
This section provides information about the Drops folder and its subfolders,
excluding the Points folder, which is discussed in Section 8. For editorial purposes
in this manual, each level of the Studio hierarchy is referred to as a folder.
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Points
I/O Devices
Drops Folder
* Control Components
Control Tasks
Holding Registers
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
*The subfolders that appear in the Drops folder are dependent upon the type of
drop being configured. Refer to Section 7-2.1 for available Ovation drop types.
• Controller
• Sim Controller
• Operator Station
• Base Station
Note
Note
Field Description
Drop ID This is the drop number of the new drop. Valid entries are 1-254.
Partner ID This field identifies the drop ID of the partner drop.
Drop Type This pull-down menu contains drop type choices: Controller, Sim Controller,
Operator Station, Sim Operator Station, Base Station.
5. After the required information is provided, click Finish. The New Drops dialog
box appears as shown in Figure 7-4. Refer to Table 7-3 for information about
the fields.
6. Enter the IP address for the Primary Drop in Ovation Network IP Address field.
Note
8. Click the Apply button to save these settings without closing the window, or
click the Ok button to save the settings and close the window.
9. Refer to Section 7-3.6 for directions on creating a Drop Point for the new
Station.
Field Description
Drop Type Pull-down menu with drop type selection.
Maximum Point Limit Not applicable for Station drops.
Drop ID Drop number of the new drop. Valid entries are 1-254.
Local Data Servers Read-only field which tells if the drop has been defined as a local data
server.
Local Alarm Collector Read-only field which tells if the drop has been defined as a local alarm
collector.
Ovation Network IP Address The Internet Protocol (IP) address for a drop is typically assigned by the
system administrator. The IP address consists of four groups of decimal
numbers and the format is:
xxx.xxx.xxx.xxx
If the network is isolated from other networks (such as, the Internet), the
IP address can be any valid range.
Ovation Network Ethers Not applicable for Station drops.
Address
Partner ID If the station drop has a partner drop, it is identified in this field.
Partner Ovation Network IP The Internet Protocol (IP) address for the Partner drop. This field is
Address unavailable if there is no Partner Drop.
Partner Ovation Network Not applicable for Operator Station drops.
Ethers Address
Field Description
Drop ID This is the drop number of the new drop. Valid entries are 1-254.
Partner ID This field identifies the drop ID of the partner drop.
Drop Type This pull-down menu contains drop type choices: Controller, Sim Controller,
Sim Operator Station, Operator Station, Base Station.
5. After the required information is provided, click Finish. The New Drops dialog
box appears as shown in Figure 7-7. Refer to Table 7-5 for information about
the fields.
6. Enter the IP address in the Ovation Network IP Address field for the Primary
Drop.
8. Click the Apply button to save these settings without closing the window, or
click the Ok button to save the settings and close the window.
9. Refer to Section 7-3.6 for directions on creating a Drop Point for the new Base
Station.
Field Description
Drop Type Pull-down menu with drop type selection.
Maximum Point Limit Not applicable for Base Station drops.
Local Data Servers Read-only field which tells if the drop has been defined as a local data
server.
Local Alarm Collector Read-only field which tells if the drop has been defined as a local alarm
collector.
Drop Id Drop number of the new drop. Valid entries are 1-254.
Ovation Network IP Address The Internet Protocol (IP) address for a drop is typically assigned by the
system administrator. The IP address consists of four groups of decimal
numbers and the format is:
xxx.xxx.xxx.xxx
If the network is isolated from other networks (such as, the Internet), the
IP address can be any valid range.
Ovation Network Ethers Not applicable for Base Station drops.
Address
Partner ID If the station drop has a partner drop, it is identified in this field.
Partner Ovation Network IP The Internet Protocol (IP) address for the Partner drop. This field is
Address unavailable if there is no Partner Drop.
Partner Ovation Network Not applicable for Base Station drops.
Ethers Address
Note
2. Right-click on the Drop Point folder and select Insert New from the resulting
pop-up menu.
3. The Insert New Drop Point Wizard appears (see Figure 7-9).
A. Define a name for the Drop Point in the Point Name Value field (the name
must be the word Drop immediately followed by its number).
B. Select the appropriate Drop Number to correspond with the Point Name
entry.
5. The configuration tabs within the New Drop Point dialog box appear (see
Figure 7-10).
Tab through the New Drop Point dialog box and complete any desired changes
to the default field values (see Table 7-6 for tabs, fields and descriptions).
6. Click the Apply button to save these settings without closing the window, or
click the Ok button to save the settings and close the window.
7. Repeat the Insert New Drop Point procedure (Steps 1 through 6) if there is a
Partner Drop.
Note
At least one Security Group must be
selected to allow Point modification.
Ancillary Additional user defined information about the
points.
eDB Collection Enabled A check box that specifies if a point will be
collected by eDB.
Scan Frequency Frequency (in seconds) at which a specific point
will be scanned by the eDB on the Highway to
determine if it meets collection criteria.
Alarm Alarm Priority Sets the alarm priority field.
Display Summary Diagram This field defines the applicable summary
diagram which is sent to the process diagram
system.
Signal Diagram This field defines the signal diagram number.
Procedure
1. Expand the System Tree to the drop folder you are going to modify.
2. Right-click the Drop folder and select Open. The Drop dialog box appears.
For example, if an alarm configuration change is made at the Unit level, it will affect
all the drops contained in the unit, unless a drop has a drop specific alarm
configuration object. However, if the change is made at the Drop level, it only
affects the drop in which the change was made.
2. Open the Configuration folder and right-click on the SNMP folder, as shown
in Figure 7-11. The Insert New SNMP Wizard appears (see Figure 7-12).
4. All SNMP settings are typed into the file. Enter all the settings needed to
complete the SNMP configuration. Refer to Section 7-5.2 for details about
SNMP settings. See Figure 7-14 for an example of an SNMP file.
5. Save the changes by choosing File from the Menu bar and selecting Save.
Note
DeviceX.Name:
Notes
Example
Device1.Name: 192.9.200.101
DeviceX.TimeOutPointName:
Parameter Description
Point Name used to indicate device time out. The point must be a digital or
packed digital point.
Example
Device1.TimeOutPointName: LP158s001
DeviceX.TimeOutBitNumber:
Parameter Description
Example
Device1.TimeOutBitNumber: 0
DeviceX.CommunityName:
Parameter Description
Example
Device1.CommunityName: Public
DeviceX.VariableY.Name:
Notes
Example
Device1.Variable1.Name:
transmission.fddi.fddimib.fddimibMACCounters.fddimibMACCo
DeviceX.VariableY.Frequency:
Parameter Description
How often, measured in seconds, to retrieve this variable from the device.
Example
DeviceX.Variable1.Frequency: 10
DeviceX.VariableY.Test:
Parameter Description
Example
Device2.Variable4.Test: ValueNEConfiguredValue
Device3.Variable5.Test: DeltaGTLimit
DeviceX.VariableY.ConfiguredValue:
Parameter Description
A value to test against a variable. This parameter is used if the test parameter is
ValueNEConfiguredValue, ValueEQConfiguredValue,or ValueGTLimit.
Example
Device2.Variable4.ConfiguredValue:4
DeviceX.VariableY.UpperLimit:
Parameter Description
A value to test against a variable. This parameter is used if the test parameter is
DeltaLTLimit.
Example
Device2.Variable4.UpperLimit:
DeviceX.VariableY.LowerLimit:
Parameter Description
A value to test against a variable. This parameter is used if the test parameter is
DeltaLTLimit.
Example
Device2.Variable4.LowerLimit:
DeviceX.VariableY.BitMaskEnabled:
Parameter Description
Values are “True” or “False”, and not case sensitive. This parameter indicates
whether the variable should be masked before testing against a configured value
or limit.
Examples
Device1.Variable3.BitMaskEnabled: true
Device1.Variable4.BitMaskEnabled: False
DeviceX.VariableY.BitMask:
Parameter Description
— ValueNEConfiguredValue
— ValueEQConfiguredValue
— ValueGTLimit
Examples
Device1.Variable3.BitMask: 384
Device1.Variable4.BitMask: 0x180
Note
DeviceX.VariableY.PointName:
Parameter Description
Point to update with result of the test. The point can be an analog, digital or
packed digital. If the point is a packed digital, it is necessary to specify a bit
number as well.
Example
Device1.Variable3.PointName: LP158s001
DeviceX.VariableY.BitNumber:
Parameter Description
Example
Device1.Variable5.BitNumber: 7
Procedure
1. Open the drop folder you are going to modify and select the Configuration
folder.
2. Right-click the SNMP folder and the SNMP object appears in the Workpad
window.
3. Open the SNMP object in the Workpad window and the SNMP Notepad
appears.
Before the I/O Devices folder can be used to define the I/O hardware, a plan should
be designed that lists the I/O needed for your Ovation system. The elements that
will be included are defined in Table 7-7.
After the plan has been designed, this information is entered into the I/O Devices
folder to define the I/O for your Ovation system. I/O Devices are defined
individually for each drop.
During configuration, the following elements are assigned point names by the
system to identify the elements to the Ovation database:
• Each PCI card in the Controller is assigned a Node (RN) Record Type point
name. The RN record type is used because it contains bits that are used to
monitor the Controller power supply.
• Each remote node is assigned a Node (RN) Record Type point name. The RN
record type is used because it contains bits that are used to monitor the node
power supply.
• Each I/O module is given a Module (RM) Record Type point name. The RM
point is used to configure the I/O module and to provide status/alarm
information about the I/O module. Points can then be assigned to each module
by using the Hardware Tab in the Points folder.
Element Description
Network Top element used for I/O connections. The system network(s) are
established in the Developer Studio.
Unit Subset of network. The unit(s) are established in the Developer Studio.
Drop Number of the Controller drop that is to be configured. (Two drop numbers
will be listed for redundant controllers.)
For local Q-Line I/O, the applicable hardware is a PCQL PCI card which
can support up to four crates of Q-Line I/O cards.
For remote Q-Line I/O, the applicable hardware is a PCRR PCI card which
can support up to eight remote Q-Line nodes.
For local Ovation I/O, the applicable hardware is a PCRL PCI card which
can support up to eight branches of Ovation I/O cards.
For remote Ovation I/O, the applicable hardware is a PCRR PCI card
which can support up to eight remote Ovation nodes.
For third party I/O devices, select the applicable I/O Device Type from
the I/O Device Type dialog box. There are no elements under the device
and it cannot be configured or serviced via the I/O Device folder.
Crate Location in I/O cabinet where Q-Line I/O modules are placed. A maximum
of four crates can be defined for each PCQL (local Q-Line I/O Device) and
for each Remote Q-Line I/O Node. Click on the Crate element to display
all the slots (12) available for that crate.
Branch Location in I/O cabinets where Ovation I/O modules are placed.
A maximum of Eight branches can be defined for each PCRL card (local
Ovation I/O Device) and for each Remote Ovation I/O Node.
Click on the Branch element to display all the slots (8) available for that
branch.
Element Description
Node A segregated portion of a Controller’s I/O hardware which is supported by
the PCRR PCI card. A maximum of eight nodes can be defined for each
PCRR card.
Each Ovation I/O node can contain up to eight branches of Ovation I/O
hardware.
Each Q-Line I/O node can contain up to four crates of Q-Line I/O
hardware.
Slot Position in branch (Ovation I/O) or crate (Q-Line) where module is located.
A maximum of 48 slots can be defined for each local Q-Line I/O device
(four crates of 12 Q-Line I/O cards).
A maximum of 64 slots can be defined for each local Ovation I/O device
(eight branches of eight Ovation I/O cards).
A maximum of 512 slots can be defined for each remote Ovation I/O device
(eight nodes of eight branches of eight Ovation I/O cards).
A maximum of 384 slots can be defined for each remote Q-Line I/O Device
(eight nodes of four crates of 12 Q-Line I/O cards).
Ovation I/O bases house the Ovation I/O modules and provide a mechanism for the
user to land field wiring and connect field signals to the Ovation I/O. Series of bases
can be connected together to form a “branch” of Ovation I/O.
The different bases can be mixed within a given I/O branch and cabinet. There are
restrictions as to how these bases can be mixed. Refer to “Planning and Installing
Your Ovation System (For Use with FDDI)” (U3-1000) or “Planning and Installing
Your Ovation System (For Use with Fast Ethernet)” (U3-1005).
The Standard I/O base houses up to two standard I/O modules (see Figure 7-15).
Ovation I/O modules supported in the standard I/O bases include analog input,
analog output, contact input, digital input, digital output, loop interface, pulse
accumulator, RTD interface, sequence of events, serial link controller, servo driver,
speed detector, and valve positioner.
Each Standard I/O module is assigned a logical address. Since each Standard I/O
base can house two Ovation I/O modules, a Standard I/O base occupies two logical
module addresses.
The Relay Output base houses one module (see Figure 7-15) and requires one
I/O address. The Relay Output base is longer than the Standard I/O base unit
because of the additional space required to house the relays. Although the Relay
Output base only contains one module, it is 1.5 times longer than the Standard I/O
module base.
• Modules are placed from top to bottom on the left side of a cabinet and from
bottom to top on the right side of a cabinet.
• If Relay Output modules are mixed with Standard I/O modules on the same
branch, the Standard I/O module base must ALWAYS start in an odd-numbered
module position on the branch (positions 1/2, 3/4, 5/6, or 7/8).
Relay Output modules can be placed in odd or even numbered positions. For
example, modules can begin in 1, 2, 3, 4, 5, 6, 7, or 8 slots.
• Physical cabinet size and branch power requirements may limit the number of
modules that can be configured in a branch.
ROP
Power Distribution
1 8
Module
Power Supply
Power Supply
Remote
Controller
Controller
Controller
Controller
2 7 Node
Controller
3 6
4 5
ROP Trans Panel
1 4 TND
5 4
1 4 1 8 1 8
2 3 6 3
2 3 2 7 2 7
3 6 6
3 2 7 2
3 2 4 5 3 5
5 4 4
6 3 3
8
4 1 2 1
4 1 7 4 2
8 1 1
T T T T
T T T T T T
Figure 7-16. Examples of I/O Cabinets with Standard I/O and Relay Modules
The System assigns an address to each Ovation module defined by the Studio. This
address is based on the logical location of the module with respect to the Ovation
Controller and is used by the Studio to configure the hardware information for a
point.
A standard I/O base consists of two logical modules; and a Relay Output base has
one logical module.
Addressing Format
The logical I/O address is composed of three numbers (four when remote I/O is
used) separated by decimals and in the following format:
• D.N.B.S where:
B = Branch (1 through 8)
The I/O addressing for the Ovation database is determined from the positions of the
bases installed in the cabinets. Installation of standard I/O bases requires at least
two I/O module addresses on a branch. Their I/O module position must always start
on odd positions.
I/O modules should be in the left-most branch of each side of a cabinet from the
TOP down to the BOTTOM. I/O modules in the right-most branch of each side of
a cabinet are addressed from the BOTTOM up to the TOP.
Relay Output bases can be located before or after standard I/O bases. Installation of
relay output bases requires one I/O module address on a branch and can begin on
an odd or even position.
Note
When a relay output base is used before a standard I/O base, an even number of
relay output bases must be used so the I/O base will start at an odd position. If a
standard I/O base follows an odd number of relay output bases, the configuration is
incorrect and will not work (see Figure 7-17 for examples).
2 7 2 7 1 7
3 6 6 6
4 5 3 5 2 5
5 4 4 3 4
6 3 3 4 3
7 2 4 2 5 2
8 1 1 6 1
PCI Card 2 controls Branches 1 through 8 via a connector on the left side of the
Controller enclosure.
PCI Card 1
PCI Card 2
Power Distribution
Power Supply
Power Supply
Module
Controller
To PCI
Controller
Card 1
To PCI Card 2 Branches
Branches 3 through
1 through 8 8
ROP
Transition
Panel
1 8 1 8
Module
A 2 7 2 7
To remaining
3 6 3 6 PCI 1 Branches
5 through 8
4 5 4 5
Module
B
5 4 5 4
Module
C
6 3 6 3
7 2 7 2
Two
8 1 8 1 modules
Terminator
per base
Note
Power Distribution
Power Supply
Power Supply
Module
Cable from
PCI 1
Branch 4
ROP
Transition
Panel
Module
1 8 1 8 F
2 7 2 7
3 6 3 6
4 5 4 5
5 4 5 4
Module
D 6 3 6 3
7 2 7 2
Module Two
E modules
8 1 8 1
per base
Terminator
Power Distribution
Power Supply
Power Supply
Node
Module
Selector
Switch
Remote
ROP
Node Transition
Controller Panel
TND 8
1 8 Transition 1 To remaining
Panel Branches 5
2
7 through 8
2 7
Module
G 3
6
3 6
5
4 5 4
Module
H 4
5 4 5
3
6 3 6
2
7 2 7
Two
1
8 1 8 modules
Terminator
per base
The Node address (1 through 8) for Ovation remote I/O is determined by where the
Node is connected to the MAU Attachment Unit (located in the Controller cabinet).
The Node Selector Switch in the Remote Node Cabinet is then set to match the
connection position. Refer to the Ovation Remote I/O section in the “Ovation I/O
Reference Manual” (R3-1150) for details about addresses for remote nodes.
Assume the PCRR card is in position 1, and the Node is in MAU position 1 for the
following examples:
Top
Transition
Panel (RRP)
1 8
Cable from
PCI 1 ROP
Branch 4 Transition
Panel
To remaining
PCI 1 Branch 8
1 8
2 7
2 7
6
Module Module
I K
3 5
3 6
3
Module
J
4 2 4
5
1 Bottom
Transition
Panel (RRB)
Assume the PCRL card is in position 1, and the cable is connected from Branch 4
of PCI Card 1 card:
Note
The address for a Q-Line card is determined by the jumper settings on the actual Q-
Line card. A visual inspection of the card should be used to determine the jumper
settings.
Procedures
1. Expand the System Tree to the I/O folder or subfolder you are going to modify.
2. Right-click the appropriate folder and select Open. A dialog box appears.
The functional drawings produced and edited by the Control Builder represent
portions of Controller logic. Typically, there are many different control drawing
sheets linked together to form the complete control structure.
The OCB drawings are stored in the Control Sheets sub folders located under the
Control Tasks folder.
The drawings display information about the algorithms that are used to build the
control logic. Refer to “Ovation Control Builder” (WIN80) for detailed information
regarding the Control Builder and its functionality.
Note
A register can be associated with more than one special function. A given special
function can store numerical data in one register, which also is used to supply the
same numerical data to another special function.
You access and insert the Holding Registers application from any Controller Drops
folder in the Developer Studio.
2. Open the Holding Register folder to reveal the Holding Register subfolder.
3. Check the WorkPad window to ensure that there is no Holding Register already
created. If a Register already exists, you can open it for editing (described in
Section 7-8.2 through Section 7-8.4).
4. If no Holding Register exists for the desired value, right-click the Holding
Register folder and choose Insert New. The Insert New Holding Register
Wizard appears.
5. Select a Value between zero and 9,999 for the holding register by entering the
value or using the arrows.
Note
6. Select the Finish button and the Holding Register Editor dialog box (Figure 7-23)
appears already open to the selected Register value, and the Register icon appears
in the WorkPad window. Refer to Section 7-8.5 for a description of the Holding
Register Editor
Note
2. Open the Holding Register folder to reveal the Holding Register subfolder.
4. Right-click the appropriate file and select Open. The Holding Register Editor
appears. Refer to Section 7-8.5 for a description of the Holding Register Editor.
Note
2. Select the register number to be changed and click in its Data Entry field.
Note
2. Select the register number to be changed and click in its Data Entry field.
Note
4. Enter a new value for each register being changed in the current set.
5. Select the Apply Page button to apply all the new values.
Note
The Menu bar provides access to the same functionality as the Toolbar buttons
(Table 7-8) with the exception of an Undo function that can be accessed through the
pull-down Edit menu.
Undo reverses the last data entry in the Data Entry column, but will NOT undo any
value that has been applied.
Toolbar
Button Function
Cut - Cuts the selected value.
Paste - Pastes the contents of the clipboard into the selected field.
Display Decimal - Displays all values in the Holding Register Editor as decimals
values.
Display Real Value - Displays all values in the Holding Register Editor as real
numbers. Only the even numbered register will contain a value. The real value
displayed is the data in the even numbered register appended to the next odd
numbered register.
Preferences - Opens the Preferences dialog box, which allows you to change the
number of rows displayed in the editor, text color, and write access.
Function Buttons
Button Function
Moves to the next set of Holding Registers.
Applies all newly entered data in the Data Entry column to the writable value
columns. Only data in the current set is applied.
Clears all newly entered data from the Data Entry column. Only data in the
current set is removed.
Preferences
Use the Preferences dialog box to change settings for the Holding Register Editor
dialog box. Refer to Table 7-10 for descriptions of the Preferences settings.
Access the Preference dialog box by selecting File in the Menu bar and choose
Preferences, or by selecting the Preferences button.
Field Description
Number of Rows Defines the number of visible rows in the Holding Register
Editor dialog box.
Entry Column Text Color Defines the color of the text in the Data Entry column.
Initially Permit Changes to Database When checked, you can write to the database, and the Apply and
Data Entry columns will appear in the Holding Register Editor
dialog box.
Initially Permit Changes to Controller(s) When checked, you can write to the Controller(s), and the Apply
and Data Entry columns will appear in the Holding Register
Editor dialog box.
OK Applies changes to the Holding Register Editor dialog box.
Cancel Cancels changes make in the current session.
Each item of data used within the Ovation system is referred to as a point. Points
include field inputs and outputs, calculated values, and internal system information.
Each point is identified by a name and a unique System ID number.
Configuration
Graphics
Networks Folder Units
Configuration
Graphics
Units Folder Drops
Configuration
Graphics
I/O Devices
Drops Folder Control Components
Control Tasks
Holding Registers
Points
Analog
Deluxe Analog
Digital
Deluxe Digital
Points Folder Packed
Deluxe Packed
Packed Digital
Algorithm
Drop
Module
Node
• Analog Points
• Digital Points
• Packed Points
• Algorithm Points
• Drop Points
• Module Points
• Node Points
Each point type has a subfolder in the Points folder (see Figure 8-2).
• I/O Channel
The Points folder calculates hardware addresses. It also ensures that the card type
is valid for the point. The following information is also provided:
• Sensor Type
• Conversion Coefficients
1. All points in the Ovation system are fully specified by three parameters, a
sixteen character maximum point name, a six character maximum sub-network
(unit), and an eight character maximum network name. The fully qualified name
will be of the format “name. unit@network.” The (.) and @ are therefore
reserved characters for point names.
However, when inserting a point into the Ovation Studio, fully qualified names
should not be entered. Only the point name parameter is used.
4. Do not begin User Defined Points’ or Control Builder Default Points’ names
with OCB.
5. Some special characters that may be used are listed in Table 8-2 under Valid
Point Name Characters.
6. Point names are not case sensitive. Lower case characters will be converted to
upper case.
Tabs
Tabs Description
Alarm Sets the various alarm priority fields.
Ancillary Additional user defined information about the point.
Byte Params Represents the byte parameters of the algorithm. Labels are
dependent on the algorithm name chosen on the Config tab.
Config Used to establish the various configurations of the points.
Display Represents the type of display (standard, exponential, or
technical), scale limits, Engineering Units, Set and Reset
descriptions, Summary and Signal diagrams.
Hardware Defines the I/O hardware configuration of each Controller in the
system.
eDB Defines if and how the process points are to be collected by the
various eDB Station “history subsystems.”
Initial Used to establish the initial values of the various points.
Tabs Description
Instrumentation Used to establish hardware information, including sensor limits.
Int Params Represents the integer parameters of the algorithm. Labels are
dependent on the algorithm name chosen on the config tab.
Limits Specifies the limits of point records.
Plant Mode Collection of parameters that can be set differently for each of
the six modes.
Point Information about the point.
Real Params Represents the real (floating point) parameters of the algorithm.
Labels are dependent on the algorithm name chosen on the
config tab.
Security Represents the defined security groups for each point in the
system.
The procedure in this section is an example of creating a point, and does not detail
specific field input. Since there are 11 types of points and each type requires
different input, the specific field information that is available for each tab is
provided in Appendix B.
Procedure
1. Expand the system tree to the appropriate Drops folder and open the Points
folder.
2. Right-click the Digital Points folder and select Insert New (see Figure 8-4).
The Insert New Digital Points Wizard appears as shown in Figure 8-5.
3. Enter the Point Name in the Point Name Value field. See Section 8-4 for
information regarding naming points.
• S - Slow (1 second)
5. Select Finish and the New Digital Points dialog box appears (see Figure 8-6.)
6. Select the Point tab and enter the appropriate values. Refer to Appendix B for
the applicable fields.
7. Select the Config tab and enter the appropriate values. Refer to Appendix B for
the applicable fields.
8. Select the Security tab and select the appropriate security groups. Refer to
Appendix B.
9. Select the Ancillary tab. Only fields that have been established in the Ancillary
subfolder of the Systems folder will appear. For more information regarding the
Ancillary fields refer to Appendix B and Section 4.
10. Select the eDB tab and refer to Appendix B for the applicable fields.
11. Select the Initial tab and enter appropriate values. Refer to Appendix B for
applicable fields.
12. Select the Alarm tab and enter the appropriate values. Refer to Appendix B for
the applicable fields.
13. Select the Hardware tab and enter the appropriate values. Refer to Appendix B
for the applicable fields.
14. Select the Display tab and enter the appropriate values. Refer to Appendix B for
the applicable fields.
15. Select the Apply or Ok button to add the point to the database. If all required
fields have been completed, the point is added to the database. If a required field
was not completed, a warning box appears prompting you to complete the
necessary information.
Note
• Field Transmitter Type must be TB, TE, TJ, TK, TR, TS, TT or B, E, J, K,
R, S, T and match the configuration module for that channel.
• Match Operating Range for channel. The Operating Range should be the
temperature values and Field Transmitter values are the mv values.
• Field Transmitter Type must be RN, RC, or RP and match the configuration
module for that channel.
• Match Operating Range for channel. The Operating Range should be the
temperature values and Field Transmitter values are the ohm values.
• I/O Task Index must be defined and should be identical for all points assigned
to the same module.
• I/O Task Index must be defined and must be identical for all points assigned
to the same module.
Note
1. Right-click on the point to be changed and select Open. The Point dialog
box.appears.
Not all attributes can be set as defaults. Information that is drop or unit specific can
not be set as a default.
• Default Remote I/O Node (under Remote Ovation I/O), Used by Node objects.
• Default Remote Qline I/O Node (under Remote Qline I/O), Used by Node
objects.
Establishing defaults for objects such as points can save considerable time when
creating points. By eliminating the need to enter repetitive information for each
point of that type, you can focus on the unique settings of the specific point. Some
examples of point fields that can be set as defaults are:
• Description
• Characteristics
• Min/Max scale
• Security Groups
Procedure
2. Open the Default Root folder to reveal the default object placeholders.
3. Select the subject Default Point Type folder (Default Analog Point for
example).
4. Open the subject default object from the WorkPad window. The appropriate
default dialog box appears as shown in the example in Figure 9-3.
5. Enter necessary point information into the appropriate tabs and fields. All
information entered for this point type will then appear in every dialog box of a
new point for this point type throughout the system.
Note
• Section 10-5 describes how to purge objects from the TrashCan view bar.
Notice that the file hierarchy in the TrashCan view bar contains placeholders for
Systems, Users, Networks, Units, Drops, and Points.
Not all objects deleted from the Hardware view bar will be stored in the TrashCan
folder. Only objects in the Hardware view bar with corresponding placeholders in
the TrashCan view bar can be moved to the TrashCan.
For example, if you delete a unit from the Hardware view bar, its folder and all of
its contents will moved from the Hardware view bar to the TrashCan view bar and
placed in the Units placeholder. However, if you delete only a Configuration object
from the Hardware view bar, that record will not be moved to the TrashCan view
bar.
• A Systems folder can be moved from the Hardware view bar and placed in the
TrashCan view bar. When you remove the Systems folder, all of its subfolders
are moved with it.
• A Networks folder can be moved from the Hardware view bar to the TrashCan
view bar. When you remove the Networks folder, all of its subfolders are moved
with it.
• A Units folder can be moved from the Hardware view bar to the TrashCan view
bar. When you remove the Units folder, all of its subfolders are moved with it.
• A Drops folder can be moved from the Hardware view bar to the TrashCan view
bar. When you remove the Drops folder, all of its subfolders are moved with it.
• You can also move individual point objects to the Trashcan view bar.
All points deleted from the Hardware view bar are listed under the Points
placeholder in the TrashCan, regardless of the drop folder from which the points
were removed. If a point is undeleted and returned to the Hardware view bar, it
will be returned to its original drop.
Procedure
To delete an object from the Hardware view bar, use the following procedures.
1. In the Hardware view bar, right-click the object to be deleted and select Delete.
The “Are You Sure?” dialog box appears (see Figure 10-2.)
Note
Procedure
Use the following procedure to restore a deleted item to the Hardware view bar.
1. Select the TrashCan view bar in the Developer Studio as shown in Figure 10-3.
2. Right-click the object to be restored to the Hardware view bar and select
Undelete. The “Are You Sure?” dialog box appears (see Figure 10-4).
3. Select Yes to move the deleted item(s) back to the original location in the
Hardware view bar, or select No to cancel the action.
Note
Procedures
To purge objects from the TrashCan view bar, use the following procedure.
1. In the TrashCan view bar, right-click the object to be deleted and select Purge, as
shown in Figure 10-5. The “Are You Sure?” dialog box appears (see Figure 10-6).
2. Select Yes to permanently delete the object from the system, or select No to
cancel the operation.
Field Description
A/C Line Frequency Defines the type of AC used in the system (50 Hz or 60Hz).
Input sampling rate is 80ms at 50Hz, and 83.3ms at 60Hz.
Default is 60Hz.
A/D Conversion Rate Defines the speed at which the A/D conversion is performed by the I/O
module - Normal or High Speed. Default is Normal.
Suppress Point Fault Module This attribute permits the RM Point Module point from going into alarm
Alarm if one or more of the analog inputs are in an alarm/sensor condition. For
example, if one or more channel(s) of a 4-20mA card were unused (and
left open), setting this attribute would prevent the RM Module Point
from going into alarm. The default is to NOT suppress the Point Fault
Module Alarm.
Field Description
Timeout Action Reset = After the timeout period, output goes to 0.
Latch = After the timeout period, the last output will be held.
Timeout Selection Pull-down menu used to define the timeout period:
16 seconds
4 seconds
2 seconds
1 second
500 milliseconds
250 milliseconds
125 milliseconds
62.6 milliseconds
Field Description
Disable Points on Ground When set, the module will report an error when an input line or return
Fault line is shorted to earth ground, and will light the “E” LED.
Field Description
Disable Points on Ground When set, the module will report an error when an input line or return
Fault line is shorted to earth ground, and will light the “E” LED.
Field Description
Blown Fuse Detection When set, if an auxiliary power supply fuse is blown, the module will
(Single-Ended Versions) report an error and will light the “E” LED.
No Fields No fields necessary in the Compact Digital Input Module tab.
(All Other Versions)
Field Description
Blown Fuse Detection When set, if an auxiliary power supply fuse is blown, the module will
(Single-Ended Versions) report an error and will light the “E” LED.
No Fields No fields necessary in the Compact Digital Input Module tab.
(All Other Versions)
Field Description
Timeout Action Reset = After the timeout period, output is cleared (output transistor is
shut off).
Latch = After the timeout period, the last output will be held.
Timeout Selection Pull-down menu used to define the timeout period:
16 seconds
4 seconds
2 seconds
1 second
500 milliseconds
250 milliseconds
125 milliseconds
62.6 milliseconds
Blown Fuse Detection When set, if a fuse is blown, the module will report an error and will light
the “E” LED.
Field Description
HART Device on Channel Indicates if a HART device is attached to the channel.
Scan HART Variables on Indicates that HART multi variable support is enabled for the channel.
Channel
Field Description
A/C Line Frequency Defines the type of AC used in the system (50 Hz or 60Hz).
Input sampling rate is 80ms at 50Hz, and 83.3ms at 60Hz.
Default is 60Hz.
HART Device on Channel Indicates if a HART device is attached to the channel.
Scan HART Variables on Indicates that HART multi variable support is enabled for the channel.
Channel
Suppress Point Fault Module This attribute permits the RM Point Module point from going into alarm
Alarm if one or more of the analog inputs are in an alarm/sensor condition. For
example, if one or more chanel(s) of a 4-20mA card were unused (and
left open), setting this attribute would prevent the RM Module Point
from going into alarm. The default is to NOT suppress the Point Fault
Module Alarm.
Field Description
Timeout Action Reset = After the timeout period, output goes to 0.
Latch = After the timeout period, the last output will be held.
Timeout Selection Pull-down menu used to define the timeout period:
16 seconds
4 seconds
2 seconds
1 second
500 milliseconds
250 milliseconds
125 milliseconds
62.6 milliseconds
HART Device on Channel Indicates if a HART device is attached to the channel.
Scan HART Variables on Indicates that HART multi variable support is enabled for the channel.
Channel
Field Description
A/C Line Frequency Defines the type of AC used in the system (50 Hz or 60Hz).
Input sampling rate is 80ms at 50Hz, and 83.3ms at 60Hz.
Default is 60Hz.
Blown Fuse Detection When set, if a fuse is blown, the module will report the appropriate error
Enabled (inputs) and will light the “4 Fuse” LED.
Blown Fuse Detection When set, if a fuse is blown, the module will report the appropriate error
Enabled (outputs) and will light the “4 Fuse” LED.
Digital Outputs on Shutoff = After the timeout period, output is cleared (output transistor is
Controller Timeout shut off).
Hold = After the timeout period, the last output will be held.
Communications Timeout Pull-down menu used to define the timeout period:
Selection 16 seconds
4 seconds
2 seconds
1 second
500 milliseconds
250 milliseconds
125 milliseconds
62.5 milliseconds
Controller Defined Process When set, indicates that the Controller is defining the process variable.
Variable 1 The process variable can then be configured as the analog point assigned
to analog channel 7.
Field Description
Controller Defined Setpoint 1 When set, indicates that the Controller is defining the setpoint. The
process variable can then be configured as the analog point assigned to
analog channel 8.
1
This field is only valid if the Electronics module firmware is at Version 5 or later.
Table A-12. Loop Interface Dialog Box Fields (Electric Drive Mode)
Field Description
A/C Line Frequency Defines the type of AC used in the system (50 Hz or 60Hz).
Input sampling rate is 80ms at 50Hz, and 83.3ms at 60Hz.
Default is 60Hz.
Blown Fuse Detection When set, if a fuse is blown, the module will report the appropriate error and
Enabled (inputs) will light the “4 Fuse” LED.
Blown Fuse Detection When set, if a fuse is blown, the module will report the appropriate error and
Enabled (outputs) will light the “4 Fuse” LED.
Digital Outputs Start Off Time = Pulses start with Off time
With On Time = Pulses start with On time
Electric Drive Mode Electric drive provides two choices for modes:
Mode 1 (normal) = Calculates Process Variable as
normal type.
Output is 2 digital outputs (raise/lower)
Mode 2 = Calculates Process Variable.
Output is 2 digital outputs.
For all modes except local, a demand of 0 forces a
hard lower.
Controller Defined When set, indicates that the Controller is defining the process variable. The
Process Variable 1 process variable can then be configured as the analog point assigned to
analog channel 7.
Controller Defined When set, indicates that the Controller is defining the setpoint. The process
Setpoint 1 variable can then be configured as the analog point assigned to analog
channel 8.
1 This field is only valid if the Electronics module firmware is at Version 5 or later.
Field Description
All field descriptions are applicable for Channel 1 or Channel 2.
Count Type Field input voltage range. Defines different terminal block connections:
+5V (high speed)
+5/12V (medium speed)
24/48V
Configuration Style A = count pulses till reset by Controller
B = count pulses and reset
Refer to Table A-14 for C = measure width of long pulse
matrix of parameters to set D = measure width of last pulse
for each style. E = measure total width of several pulses since last read
F = measure period of repetitive pulses
G = measure pulse width ratios
(Channel 1 measures pulse width; Channel 2 measures pulse period)
H = measure speed (frequency)
(Channel 1 is used for the time base; Channel 2 counts the input pulses)
Field Description
Reset on Snapshot When set, the counter goes back to zero (0) after the snapshot occurs.
Enable command When set, counter has been enabled to count and does not need the external
ENABLE signal.
Configuration Style
Field
A B C D E F G H
Module Record Point X X X X X X X X
Name
Count Type X X X X X X X X
Configuration Style A B C D E F G H
Count Select X X X X X X
Disable Debounce on X X X X X X X
ENABLE and
SNAPSHOT
ENABLE for OFF input X X
Snapshot Count on X X
Pulse Edge
Measure X X X
Increment Count on X X
Pulse Edge
Reset on Read X X
Debounce Count Input X X X
Compare and Snapshot X
Reset on Snapshot X X X X
Enable command X X X X X
Field Description
A/C Line Frequency Defines the type of AC used in the system (50 Hz or 60Hz).
Input sampling rate is 80ms at 50Hz, and 83.3ms at 60Hz.
Default is 60Hz.
Channel 1 Scale Refer to Table A-16 for descriptions of the items in the menu.
Channel 2 Scale Refer to Table A-16 for descriptions of the items in the menu.
Channel 3 Scale Refer to Table A-16 for descriptions of the items in the menu.
Channel 4 Scale Refer to Table A-16 for descriptions of the items in the menu.
Suppress Point Fault Mode This attribute permits the RM Point Module point from going into alarm
Alarm if one or more of the analog inputs are in an alarm/sensor condition. For
example, if one or more chanel(s) of a 4-20mA card were unused (and
left open), setting this attribute would prevent the RM Module Point
from going into alarm. The default is to NOT suppress the Point Fault
Module Alarm.
Field Description
Timeout Action Reset = After the timeout period, output is cleared (output transistor
is shut off).
Latch = After the timeout period, the last output will be held.
Timeout Selection Pull-down menu used to define the timeout period:
16 seconds
4 seconds
2 seconds
1 seconds
500 milliseconds
250 milliseconds
125 milliseconds
62.6 milliseconds
Blown Fuse Detection Should be set, module will report a blown fuse and will light the “E”
LED.
Field Description
Timeout Action Reset = After the timeout period, output is cleared (output transistor
is shut off).
Latch = After the timeout period, the last output will be held.
Timeout Selection Pull-down menu used to define the timeout period:
16 seconds
4 seconds
2 seconds
1 seconds
500 milliseconds
250 milliseconds
125 milliseconds
62.6 milliseconds
Blown Fuse Detection Should be set, module will report a blown fuse and will light the “E”
LED.
Field Description
Chatter Control Action Chatter control counter is reset or it is decremented every 100 ms.
Reset setting is recommended.
Chatter Control Disable It is recommended that this not be set and chatter control will be enabled.
Ground Fault Detection Should not be set.
Contact Wetting Voltage Should not be set.
Failure Detection
Event Tagging Enable Channels that are set will enable the event tagging mask for that channel.
Note: All channels enabled for event tagging MUST have an associated
digital point configured for that channel.
Blown Fuse Detection Should be set, module will report a blown fuse and will light the “E”
LED.
Field Description
Chatter Control Action Chatter control counter is reset or is decremented every 100 ms.
Reset setting is recommended.
Chatter Control Disable It is recommended that this not be set and chatter control will be enabled.
Ground Fault Detection User can set as needed.
Contact Wetting Voltage Should not be set.
Failure Detection
Event Tagging Enable Channels that are set will enable the event tagging mask for that channel.
Note: All channels enabled for event tagging MUST have an associated
digital point configured for that channel.
Table A-21. Sequence of Events Dialog Box Fields (48VDC contact input)
Field Description
Chatter Control Action Chatter control counter is reset or is decremented every 100 ms.
Reset setting is recommended.
Chatter Control Disable It is recommended that this not be set and chatter control will be enabled.
Ground Fault Detection Should be set.
Contact Wetting Voltage Should be set.
Failure Detection
Event Tagging Enable Channels that are set will enable the event tagging mask for that channel.
Note: All channels enabled for event tagging MUST have an associated
digital point configured for that channel.
Blown Fuse Detection When set, the module will report a blown fuse and will light the “E”
LED.
Field Description
Chatter Control Action Chatter control counter is reset or it is decremented every 100 ms.
Reset setting is recommended.
Chatter Control Disable It is recommended that this not be set and chatter control will be enabled.
Ground Fault Detection Should not be set.
Contact Wetting Voltage Should not be set.
Failure Detection
Event Tagging Enable Channels that are set will enable the event tagging mask for that channel.
Note: All channels enabled for event tagging MUST have an associated
digital point configured for that channel.
Blown Fuse Detection Should be set, module will report a blown fuse and will light the “E”
LED.
Field Description
Chatter Control Action Chatter control counter is reset or it is decremented every 100 ms.
Reset setting is recommended.
Chatter Control Disable It is recommended that this not be set and chatter control will be enabled.
Ground Fault Detection Should not be set.
Contact Wetting Voltage Should not be set.
Failure Detection
Event Tagging Enable Channels that are set will enable the event tagging mask for that channel.
Note: All channels enabled for event tagging MUST have an associated
digital point configured for that channel.
Table A-24. Compact Sequence of Events Dialog Box Fields (48VDC contact input)
Field Description
Chatter Control Action Chatter control counter is reset or is decremented every 100 ms.
Reset setting is recommended.
Chatter Control Disable It is recommended that this not be set and chatter control will be enabled.
Ground Fault Detection Should be set.
Contact Wetting Voltage Should be set.
Failure Detection
Event Tagging Enable Channels that are set will enable the event tagging mask for that channel.
Note: All channels enabled for event tagging MUST have an associated
digital point configured for that channel.
Blown Fuse Detection When set, the module will report a blown fuse and will light the “E”
LED.
Field Description
I/O Bus Timeout Bits Pull-down menu used to define the timeout period:
16 seconds
4 seconds
2 seconds
1 second
500 milliseconds
250 milliseconds
120 milliseconds
60 milliseconds
Field Description
Number of Teeth Number of teeth on output gear (that is, pulses per revolution)
Gear Ratio Ratio between motor/device and the output gear.
Overspeed Limit (RPM) Overspeed limit at the motor.
Overspeed Limit (PPS) at Read-only information field.
module
Nominal Speed (RPM) Nominal speed at the motor.
Requested Update Period Maximum time in microseconds for the speed calculation requested for
(misc.) at Nominal Speed high resolution reading. When motor operates at nominal speed or faster,
the update period is guaranteed to be less than this requested update
period.
Pulse Count per Update This is a read-only information field. It displays the number of pulses
used for high revolution speed calculation.
Field Description
Open Wire Test Enabled Enable this option if the module will check for broken wire, and if the
source resistor is below 1000 ohms.
Overspeed Mode Mode 1 - Controller command or card overspeed trip.
(there are four different Relay is energized by the Controller or by the module
modes for energizing the when an overspeed condition is detected.
relay’s outputs when an
overspeed condition exists) Mode 2 - Card overspeed trip only.
Relay is energized by the module when an overspeed
condition is detected.
Field Description
IO Bus Timeout Bits Pull-down menu used to define the timeout period:
16 seconds
4 seconds
2 seconds
1 second
500 milliseconds
250 milliseconds
120 milliseconds
60 milliseconds
Ignore shutdown input If selected, the Valve Positioner module will ignore the input in Normal
mode.
If not selected, the Valve Positioner module will close the valve when
shutdown input is activated.
The Tabs are listed in alphabetical order, not by the order that they appear in the
dialog boxes. Additionally, fields are also listed alphabetically by grouping.
Alarm cutout name This field is the point used as a cutout for the base
point (digital or packed point).
Alarm cutout bit If the Alarm Cutout is a packed point, the bit
number that is entered in this field is mapped to bits
28-32 of the SJ field.
Normal:
Alarm delay time This field sets the initial alarm delay time, in
seconds. This delay is the time between the alarm
being detected and being reported in alarm.Valid
time entry is from 0 to 65535 seconds. This field
does not apply to sensor alarms since they never
delay or cutout from reporting.
Low alarm priority 1-4 These fields map to the various alarm priority
fields of the point record. (AP, P6, P7, P8)
Low alarm user priority This field maps to the user alarm priority field of
the point record. (P9)
High alarm priority 1-4 These fields map to the various alarm priority
fields of the point record.(AP, P6, P7, P8)
High alarm user priority This field maps to the user alarm priority fields of
the point record. (P9)
Alarm priority
These fields map to the various alarm priority
fields of the point record. (AP)
Ancillary Fields appear only if they These are user defined fields that provide
have been created as additional information about the point. Up to 100
described in Section 4. fields can be created.
Byte Params 1 through 16 Represent the byte parameters of the algorithm.
Only apply to the algorithms selected in the Config
tab. This allows you to see what fields apply to the
algorithm. Only the algorithms that need to be
tuned will be tuned.
Power check channel Used for the power check function for packed
(bit 1-16) points.
SOE 1 shot algorithm This field maps directly to bit 3 of the EQ field
SOE reporting option This maps directly to the bits 5 and 6 of the EQ
field of the point record.
Status checking type
N = no status checking
0 = alarm on 0
1= alarm on 1
2 = state change only
3 = alarm in transition from 0 to1
4 = alarm in transition from 1 to 0
Tunable This field defines whether or not the algorithm is
tunable.
Tuning diagram This field defines the number of the applicable
tuning diagram.
Reset description (0-15) This field is the text description of the reset state.
Packed points
Set description (Digital This field is the text description of the set state.
points)
Reset description (Digital This field is the text description of the reset state.
points)
Digits Displayed This field represents the number of significant
digits to display for standard format.
Display Type This field represents the type of display (standard,
exponential, technical).
Engineering Units This is the text description of the engineering units.
Maximum Scale This field scales the value of the point for displays.
Minimum Scale This field scales the value of the point for displays.
Signal Diagram This field defines the signal diagram number.
Summary Diagram This field defines the applicable summary diagram
which is sent to the process diagram system.
AB PLC5 2 IN N7:02
Where:
Terminal 1-6 This field is a label for those wiring the system; the
information has no bearing on operation.
Termination Type This field is a label for those wiring the system; the
information has no bearing on operation.
GE Point Name This field is the name of the GE point from where
the data is being retrieved, for example,
L41BKRC_CPB.
GE Controller Name This field is the name of GE Controller, for
example, GA.
GE Type See Section 8 for valid GE types.
GE Node Index This field is the number of the GE
Node.
GE Datatype GE Mark V Analog
Signed or Unsigned
GE Mark VI Analog
Short Integer = Signed 8 bit
integer
Unsigned Short Integer = Unsigned 8 bit
integer
Integer = Signed 16 bit
integer
Unsigned Integer = Unsigned 16
bit integer
Double Word = Signed 32 bit
integer
Unsigned Double Word = Unsigned 32
bit integer
X = Original input value, which is converted to Y (engineering units) by the specified type of conversion.
Y = Final, converted value of the analog input.
C1 - C6 = Conversion coefficients.
Scaling:
Bottom output scale This field is used to linearly convert the value to the
card output level.
Top output scale This field is used to linearly convert the value to the
card output level.
High sensor limit This field indicates the high limit of the signal’s
operating range.
Low sensor deadband range This field maps to the BL field of the point record.
High sensor deadband range This field maps to the BH field of the point record.
Field transmitter low value This field indicates the low limit of the
transmitter’s operating range
Field transmitter high value This field indicates the high limit of the
transmitter’s operating range.
Signal conditioner value This field defines a signal conditioner value that
can be used to allow milliamp type sensors to be
read by volt cards.
Int Params 1 through 60 Represent the integer parameters of an LC
(algorithm) record. Only apply to the algorithms
selected in the config tab. This allows you to see
what fields apply to the algorithm. Only the
algorithms that need to be tuned will be tuned.
High engineering limit This field maps directly to EH field of the point
record.
High reasonability limit This field maps directly to the RV field of the point
record.
High alarm limit incremental This field maps directly to the ZI field of the point
record.
High alarm limit user This field maps directly to the UH field of the point
record.
Low Limits:
Low clamp limit This field maps directly to the VL field of the point
record.
Low engineering limit This field maps directly to the EL field of the point
record.
Low reasonability limit These fields map directly to the RW field of the
point record
Low alarm limit 1 - 4 These fields map directly to the LL, ZL, 3Z, and 4Z
of the point record.
Low alarm limit incremental This field maps directly to the ZM field of the point
record.
Low alarm limit user This field maps directly to the UL field of the point
record. Analog points can have 2 user defined
alarms; one high and one low. The limits may be
either a Value or the name of another analog point
in the system. These alarms are independent of the
4 high and 4 low alarms. The high/low deadbands
defined for the 4 high/low alarms apply to these
user limits also. Exceeding these alarms will
generate an alarm message.
A NTP 5-11
Adding a base NT Station 7-8 Configuration folder (systems) 4-41
Adding a Controller drop 7-4 image builder 4-45
Adding a Point to a Point Group 4-55 point processing 4-42
Adding a Sim Controller 7-4 Configuration folder (units) 6-5
Adding an NT Station drop 7-5 adding plant mode to unit 6-6
Adding plant mode to a unit 6-6 modifying plant mode 6-7
Adding points to PDS point groups 4-63, 4-67 plant mode folder 6-6
Adding SimNT Station drop 7-7 Consistency Checking 2-20
Addressing I/O modules 7-31 Contact Input module A-5
Allen-Bradley PLC I/O devices 7-39 Control Builder 1-3, 7-40
Analog Input module A-2 Control Tasks 7-40
Analog input points (config) 8-18 Controller drop (adding) 7-4
Analog Output module A-3 Creating a new system 3-6, 3-8, 4-4
Analog output points (config) 8-18 Creating PDS point groups 4-61, 4-66
Ancillary folder 4-38 Creating points 8-12
modifying ancillary objects 4-40 Customizing the Command bar 2-13
Ancillary Objects
updating 4-40 D
Database Types 3-6
B distributed 3-7
Browse Command bar 2-11 Local 3-7
Building a System Tree 3-8 Master Database (Oracle) 3-6
DDB (Dynamic Data Blocks) 5-7
C Default drop security objects 4-34
Clear function 2-31 Defaults bar 2-17, 9-2
Code keys for licenses 4-14, 4-19 setting default objects 9-4
Command bars 2-10 Defining your system 3-6
browse 2-11 Deleting items 10-4
customizing 2-13 from Hardware bar 10-3
operation 2-11 purging deleted items 10-6
standard 2-10 restoring deleted items 10-5
window 2-11 TrashCan bar 10-2
Commuter license 4-21 Developer Studio 2-2
Compact Contact Input module A-4 command bars 2-10
Compact Digital Input module A-6 components 2-4
Compact Sequence of Events module A-24 dialog boxes 2-19
Complex points (config) 8-17 drops folder 3-5, 7-1
analog input points 8-18 features 2-20
analog output points 8-18 function bars 2-4, 2-15
analog/thermocouple points 8-17 interfaces to other software 1-3
digital input points 8-19 menu bar 2-8
digital output points 8-19 networks folder 3-4, 5-1
pulse accumulator points 8-19 overview 1-1, 2-1
RTD points 8-17 points folder 3-5, 8-1
Configuration folder (drops) 7-15 right-click menu 2-5
Configuration folder (networks) 5-6 system tree 2-2
DDB 5-7 systems folder 3-3, 4-2
V
Valve Positioner module A-30
View Buttons 2-4
W
Warning boxes for licenses 4-14
Where Used function 2-41
Window Command bar 2-11
WorkPad Toolbar 2-4
WorkPad window 2-4
Workspace window 2-4