Professional Documents
Culture Documents
MMR (50Hz) Data Booklet IA158-A
MMR (50Hz) Data Booklet IA158-A
MMR series
SUBMERSIBLE MIXERS
d a t a b o o k l e t
MMR series
SUBMERSIBLE MIXERS
50Hz
d a t a b o o k l e t
MMR series MMR series
MMR
242
General characteristics
400
• Innovative cable gland system with cable holder. The universal thread ring-nut can be removed
to fix a rigid or flexible duct to the cable gland to protect the cable from physical and mechanical
Ø2
stresses.
10
• Premium IE3 class cold-running motor for high efficiency and minimal energy use.
439
Insulation class H (180°C).
• Some versions are suitable for 60°C max ambient temperature. (on request)
180
• Two silicon carbide (SiC) mechanical seals protected inside a large, inspectable oil chamber.
MMR 650-series equipped with 3 mechanical seals. 473
200
• Cast AISI 316 stainless steel propeller, designed with specially shaped blades to ensure high
535
hydraulic efficiency and prevent fouling with filaments and solids. Extra thick for ruggedness and
reliability even in heavy-duty conditions. 604
• Ball bearings with lifetime lubrication designed to guarantee 100,000 working hours.
Temperature sensor on request.
35 Kg (stand and guiding system excluded)
• Rugged planetary reduction gearbox which provides high reduction ratios and torque transfer
and withstands heavy radial loads, with compact size and light weight.
• Water sensor detecting seepage into the mechanical seal oil chamber. The temperature sensor
prevents possible damage due to overheating of the motor. Bearing temperature sensors
are available on request. (other monitoring options are available for the MMR 650-series on Product Monitoring
request) Type SUBMERSIBLE MIXER Thermal protector klixon
• Wide range of rugged stainless steel accessories for optimal installation in relation to the system Name MMR21NF4.75D-5 Leakage sensor 1 in mechanical seals chamber
layout and when replacing existing devices. Configured -
Standard CE
Operating limits
Available series Ambient temperature 0 - 60°C
Motor Max. density treated liquid 1100 Kg/m3
Rated Voltage 400 V pH treated liquid 6-14
DIRECT TRANSMISSION (200 - 300 - 400 Series) page 5 Frequency 50 Hz Max. start per hour 20 /h (equally distributed)
• 4 - 6 - 8 poles motor with DIRECT TRANSMISSION Motor phases 3 Max. acoustic pressure level Max 70 dB (A)
• Motor power 0.75 - 4.5 kW Number of poles 4 Operating mode S1 – Continuous use
• Propeller Ø 200 - 300 - 400 mm Incoming power P2 0.75 kW
Electric power P1 0.9 kW
Rated current 1.8 A Construction materials
rpm 1444 rpm Case Cast iron EN-GJL-250
Efficiency 82.5 % Gear box -
Cos Ø 0.729 Propeller AISI 316 (optional AISI 329)
REDUCTION GEARS (650 Series) page 15 Rated torque 5.0 Nm Jet ring -
Start DOL Shaft AISI 431
• 4 poles motor with REDUCTION GEARS Starting current 11.2 A Mechanical seal (motor side) Silicon carbide
• Motor power 4 - 7.5 kW Starting torque 12.1 Nm Mechanical seal (propeller side) Silicon carbide
• Propeller Ø 650 mm Degree of protection IP 68 Painting Bi-epoxy 200 µm (optional 400 µm)
Insulation class H Screws Stainless steel A2-70 (optional A4)
Motor efficiency class ref. IE3 Gaskets NBR
Fixing system AISI 304 stainless steel
(optional AISI 316)
Gear unit
Key to product code Type - Installation
Gear ratio 1
MMR MMR
MMR22NF41.1D-5 MMR23NF41.5D-5
242 242
400
400
Ø2
Ø2
10
10
439
439
180
180
486 486
200
200
547 547
616 616
35 Kg (stand and guiding system excluded) 36 Kg (stand and guiding system excluded)
Propeller Propeller
Name 22 Name 23
Rated diameter 200 mm Rated diameter 200 mm
Number of blades 3 Number of blades 3
rpm 1436 rpm rpm 1432 rpm
Pp2 0.98 kW STANDARD OPTIONAL Pp2 1.0 kW STANDARD OPTIONAL
Propeller thrust 220 N Propeller thrust 230 N
Jet ring Optional standard 60 x 60 Jet ring Optional standard 60 x 60
optional 50 x 50 optional 50 x 50
80 x 80 80 x 80
Cable 100 x 100 100 x 100
Cable
Type 4G1.5 + 3x1 Type 4G1.5 + 3x1
Length 10 m Length 10 m
MMR MMR
MMR33NF61.5D-5 MMR31NF61.5D-5
302 302
500
500
Ø3
Ø3
00
00
472
472
180
180
300
300
606 606
675 675
48 Kg (stand and guiding system excluded) 48 Kg (stand and guiding system excluded)
Propeller Propeller
Name 33 Name 31
Rated diameter 300 mm Rated diameter 300 mm
Number of blades 2 Number of blades 2
rpm 942 rpm rpm 942 rpm
Pp2 0.92 kW Pp2 1.33 kW STANDARD
STANDARD
Propeller thrust 350 N Propeller thrust 450 N
Jet ring Optional standard 60 x 60 Jet ring Optional standard 60 x 60
optional 50 x 50 optional 50 x 50
80 x 80 80 x 80
100 x 100 100 x 100
Cable Cable
Type 4G1.5 + 3x1 Type 4G1.5 + 3x1
Length 10 m Length 10 m
MMR MMR
MMR32NF62.2D-5 MMR34NF63.0D-5
302
308
500
500
Ø3
Ø3
00
03
525
472
180
180
300
300
700
769 740
809
57 Kg (stand and guiding system excluded) 79 Kg (stand and guiding system excluded)
Propeller Propeller
Name 32 Name 34
Rated diameter 300 mm Rated diameter 300 mm
Number of blades 3 Number of blades 3
rpm 942 rpm rpm 960 rpm
Pp2 1.62 kW STANDARD Pp2 2.15 kW STANDARD
Propeller thrust 500 N Propeller thrust 660 N
Jet ring Optional standard 60 x 60 Jet ring Optional standard 60 x 60
optional 50 x 50 optional 50 x 50
80 x 80 80 x 80
Cable 100 x 100 Cable 100 x 100
Type 4G1.5 + 3x1 Type 4G1.5 + 3x1
Length 10 m Length 10 m
MMR MMR
MMR35NF63.2D-5 MMR42NF83.0D-5
462
308
750
500
Ø4
00
Ø3
03
525
985
180
568
400
300
740
861
809 952
79 Kg (stand and guiding system excluded) 123 Kg (stand and guiding system excluded)
Propeller Propeller
Name 35 Name 42
Rated diameter 300 mm Rated diameter 400 mm
Number of blades 3 Number of blades 2
rpm 957 rpm rpm 716 rpm
Pp2 2.99 kW STANDARD Pp2 2.18 kW STANDARD
Propeller thrust 820 N Propeller thrust 625 N
standard 60 x 60 standard 100 x 100
Jet ring Optional Jet ring Optional
optional 50 x 50
80 x 80
100 x 100
Cable Cable
Type 4G1.5 + 3x1 Type 4G2.5 + 3x1
Length 10 m Length 10 m
MMR MMR
MMR44NF84.5D-5 MMR61NF44.0G072-5
462
1000
750
539
Ø6
Ø4
50
00
985
985
568
568
650
400
1113
863 1204
954
130 Kg (stand and guiding system excluded) 145 Kg (stand and guiding system excluded)
Propeller Propeller
Name 44 Name 44
Rated diameter 400 mm Rated diameter 650 mm
Number of blades 3 Number of blades 3
rpm 714 rpm rpm 202 rpm
Pp2 4.0 kW STANDARD Pp2 1.98 kW STANDARD
Propeller thrust 1060 N Propeller thrust 1025 N
standard 100 x 100 standard 100 x 100
Jet ring Optional Jet ring Optional
Cable Cable
Type 4G2.5 + 3x1 Type 4G2.5 + 3x1
Length 10 m Length 10 m
MMR MMR
MMR61NF44.0G066-5 MMR61NF45.5G058-5
1000
1000
539 539
Ø6
Ø6
50
50
985
985
568
568
650
650
1113 1113
1204 1204
145 Kg (stand and guiding system excluded) 148 Kg (stand and guiding system excluded)
Propeller Propeller
Name 61 Name 61
Rated diameter 650 mm Rated diameter 650 mm
Number of blades 3 Number of blades 3
rpm 219 rpm rpm 251 rpm
Pp2 2.52 kW Pp2 3.80 kW STANDARD
STANDARD
Propeller thrust 1165 N Propeller thrust 1500 N
standard 100 x 100
Jet ring Optional standard 100 x 100 Jet ring Optional
Cable Cable
Type 4G2.5 + 3x1 Type 4G2.5 + 3x1
Length 10 m Length 10 m
1616 DATA
DATA BOOKLET
BOOKLET TSURUMI PUMP 17
MMR series MMR series
MMR MMR
MMR61NF45.5G054-5 MMR61NF47.5G049-5
1000
1000
516
539
Ø6
Ø6
50
50
1009
985
568
568
650
1113
650
1141
1204
1232
148 Kg (stand and guiding system excluded) 184 Kg (stand and guiding system excluded)
Propeller Propeller
Name 61 Name 61
Rated diameter 650 mm Rated diameter 650 mm
Number of blades 3 Number of blades 3
rpm 267 rpm rpm 300 rpm
Pp2 4.40 kW STANDARD Pp2 5.80 kW STANDARD
Propeller thrust 1700 N Propeller thrust 2100 N
standard 100 x 100 standard 100 x 100
Jet ring Optional Jet ring Optional
Cable Cable
Type 4G2.5 + 3x1 Type 4G6
Length 10 m Length 10 m
1818 DATA
DATA BOOKLET
BOOKLET TSURUMI PUMP 19
MMR series MMR series
MMR
220
General characteristics
400
• Innovative cable gland system with cable holder. The universal thread ring-nut can be
Ø2
removed to fix a rigid or flexible duct to the cable gland to protect the cable from physical
10
and mechanical stresses.
424
• Two silicon carbide (SiC) mechanical seals protected inside a large, inspectable oil
chamber.
180
• Cast AISI 316 stainless steel propeller, designed with specially shaped blades to ensure
high hydraulic efficiency and prevent fouling with filaments and solids. Extra thick for
428
ruggedness and reliability even in heavy-duty conditions.
200
• Ball bearings with lifetime lubrication designed to guarantee 100,000 working hours. 490
520
• Wide range of rugged stainless steel accessories for optimal installation in relation to the
system layout and when replacing existing devices.
• Cast stainless steel AISI 316 motor body. 23 Kg (stand and guiding system excluded)
Product Monitoring
Available models Type
Name
SUBMERSIBLE MIXER
MMR21NR4.75D-5
Thermal protector
Leakage sensor
-
-
Configured -
• 4 poles motor with DIRECT TRANSMISSION Standard CE
• Motor power 0.75 - 1.1 kW Operating limits
Ambient temperature 0 - 40°C
• Propeller Ø 200 mm Motor Max. density treated liquid 1100 Kg/m3
Rated Voltage 400 V pH treated liquid 3-14
Frequency 50 Hz Max. start per hour 20 /h (equally distributed)
Motor phases 3 Max. acoustic pressure level Max 70 dB (A)
Key to product code Number of poles 4 Operating mode S1 – Continuous use
Incoming power P2 0.75 kW
MMR 2 2 N R 4 1.1 D - 5 Electric power P1
Rated current
1.0kW
2.0 A Construction materials
1 2 3 4 5 6 7 8 9 rpm 1396 rpm Case AISI 316
Efficiency 76% Gear box -
Cos Ø 0.719 Propeller AISI 316 (optional AISI 329)
1 Series 5 Material Rated torque 5.1 Nm Jet ring -
2 Propeller diameter F : Cast iron Start DOL Shaft AISI 431
2 : Ø 200 R : Stainless steel Starting current 8.7 A Mechanical seal (motor side) Silicon carbide
Starting torque 11.9 Nm Mechanical seal (propeller side) Silicon carbide
3 : Ø 300 6 Poles
Degree of protection IP 68 Painting Bi-epoxy 200 µm (optional 400 µm)
4 : Ø 400 7 Motor power (kW) Screws Stainless steel A2-70 (optional A4)
Insulation class H
6 : Ø 650 8 Drive type Gaskets NBR
3 Type of propeller D : Direct transmission Fixing system AISI 304 stainless steel
4 With or without guide ring G××× : Reduction gear + ratio Gear unit (optional AISI 316)
Propeller
Name 21
Rated diameter 200 mm
Number of blades 2
rpm 1396 rpm
Pp2 0.48 kW
Propeller thrust 155 N STANDARD OPTIONAL
Jet ring -
standard 60 x 60
optional 50 x 50
80 x 80
Cable 100 x 100
Type 4G1.5
Length 10 m
MMR
400
The recommended installation modes are:
Ø2
10
424
Mast installation (fig. A and B)
180
428
200
502
532
Product Monitoring
Type SUBMERSIBLE MIXER Thermal protector -
Name MMR22NR41.1D-5 Leakage sensor -
Configured -
Standard CE
Operating limits
Ambient temperature 0 - 40°C
Motor Max. density treated liquid 1100 Kg/m3
Rated Voltage 400 V pH treated liquid 3-14
Frequency 50 Hz Max. start per hour 20 /h (equally distributed)
Motor phases 3 Max. acoustic pressure level Max 70 dB (A)
Number of poles 4 Operating mode S1 – Continuous use
Incoming power P2 1.1 kW
Electric power P1 1.5 kW
Rated current 3.0 A Construction materials
rpm 1380 rpm Case AISI 316
Efficiency 75.0% Gear box -
Cos Ø 0.701 Propeller AISI 316 (optional AISI 329)
Rated torque 7.6 Nm Jet ring -
Start DOL Shaft AISI 431
Starting current 12.4 A Mechanical seal (motor side) Silicon carbide
Starting torque 17.8 Nm Mechanical seal (propeller side) Silicon carbide
Degree of protection IP 68 Painting Bi-epoxy 200 µm (optional 400 µm)
Insulation class H Screws Stainless steel A2-70 (optional A4)
Gaskets NBR
Fixing system AISI 304 stainless steel
Gear unit (optional AISI 316)
Type -
Gear ratio 1 Installation
Propeller A B
Name 22
Rated diameter 200 mm
Number of blades 3
rpm 1380 rpm The most widely used installation mode, suitable for mixers of any shape and size.
Pp2 0.95 kW The mixer, fitted with a runner which is also compatible with existing installations, slides along a square post and can be removed
Propeller thrust 210 N STANDARD OPTIONAL with no need to drain the tank, thanks to rugged lifting jib cranes.
Jet ring - The mixer can be horizontally adjusted for the best possible position, while vertical adjustment is possible with the aid of special
standard 60 x 60
optional 50 x 50 optional runners.
Cable 80 x 80
100 x 100
Type 4G1.5
Length 10 m
Hmin
MMR 200
100x100 mm MMR 300
27.812 AISI 304
base pole mixer MMR 400
MMR 650
MMR 200
100x100 mm pole MMR 300
27.818 AISI 304
Lenght = 3 m MMR 400
Crane
MMR 650 MMR 200
28.067 for Ø60 mm pole Galvanized steel MMR 300
MMR 200 (max capacity 200 kg)
100x100 mm pole MMR 300
- AISI 304
Lenght = 6 m MMR 400
MMR 650
MMR 200
Crane MMR 300
Fixed upper bracket 28.399 for Ø100 mm pole Galvanized steel MMR 400
27.996 floor AISI 304 MMR 200 (max capacity 450 kg ) MMR 650
for Ø 2” pole
MMR 200
MMR 300
Adjustable upper bracket a 24.659 Lifting hook Galvanized steel MMR 400
28.032 floor AISI 304 MMR 200 MMR 650
for Ø 2” pole
MMR 200
Base for crane MMR 300
Upper bracket 28.073 AISI 304 MMR 400
MMR 200 Ø100 mm pole
28.017 wall AISI 304 MMR 650
MMR 300
for 60x60 mm pole