Professional Documents
Culture Documents
Software Update Procedure For S22 - Based On 3090 Step by Step
Software Update Procedure For S22 - Based On 3090 Step by Step
Software Update Procedure For S22 - Based On 3090 Step by Step
4. Press the “Keyboard” key and hold it, wait the “System Update” appears.
1
Software upgrade procedure
5. Choose the “System Update” and wait it finish , then shut down the S22, remove the USB disk.
6. Reboot. The update for touch panel is finished.
Before Update:
Costumer should provide SonoScape Service Engineer the SN of the S22, if the S22 can
boot up, then the costumer should also provide SonoScape Service Engineer the picture
of “system information”.
Software upgrade procedure
After you send the information to the engineers of SonoScape , they will give the link to
download the software you need.
Costumer should also make sure that the date, the year set on the S22 is correct, if not,
costumer should change the date and the year in the Bios setting, then save the setting
(Reference the Bios Setting chapter in the “kernel update” part).
After the preparation work, below are the steps of updating the S22:
Software upgrade procedure
There are two ways that costumer can update the S22:
1. Normal Update without kernel 2. Update with kernel
Normal Update without kernel: Kernel version won’t change, don’t need a bootable USB
storage, the patient data won’t deleted.
Update with kernel: Kernel version will change, totally reinstall the software, the HDD will
be formatted.
Normal Update
3. Power up the system, plug the USB disk with software to S22 ; while in exam screen,
press shift, then e, then set up key one by one, the screen will display:
10. Reboot the system, and remove the USB storage, wait for the install complete (There
will be a blue screen appears, don’t worry, it’s the system installing the software.)
Software upgrade procedure
11. After the exam interface appears, the simple update is complete.
Kernel Update:
Essentials:
Bootable USB drive (Appendix A)
Update files(adata_3.0.9.0_s22, asecure800000_3.0.9.0_s22, aconfigXXXXXX, Keypass)
External USB keyboard
Take a photo of the ‘system information’ interface to record the actual control number.
Software upgrade procedure
6. Get into the Bios, choose “Hard Drive BBS Priorities” then choose the Kingston USB
drive as the 1st drive like the picture below:
Software upgrade procedure
9. The system will reboot and boot from the Bootable USB drive.
10. Wait a while until a prompt message appears on the screen
11. Input the”forcekill” or “Y” command, (forcekill means that HDD will be formatted
on this step)
then press Enter.
Software upgrade procedure
12. When the system prompt: “Recovery Complete! Press any key to shut down” press
“Enter” key on the external keyboard.
13. After the system shut down, remove the bootable USB and the external keyboard,
boot the system and wait until the Exam screen appears (There will be a blue screen
appears, don’t worry, it’s the system installing the software.).
14. After the exam screen appears, that means the software has been already installed, the
Software upgrade procedure
aconfig file and keypass are not installed yet, there will be no inform about the license.
The software already installed, next we need to update the config and Keypass.
15. After kernal update to 3090, the control number in the about interface will become to
000000, and we need enter the engineer mode to change the control number to the
actual control number, then restart the machine.
In the below interface, press freeze and input yearly password: IK810 (2019) to enter the
engineer mode.
Input the actual control number in the below interface, then press enter.
(The config is already installed, costumer can remove the USB disk now)
21. Reboot the machine.
22. Copy the keypass file to the root directory of an empty USB disk.
23. Insert the USB disk in the USB ports on the side of the S22.
24. press shift, then e, then menu key one by one, the screen will display:
25. Input the Monthly password :OQ1416(for Jan,2019) and choose “Probe Table In”
Software upgrade procedure
26. The Keypass already imported to the S22, then we need to active it.
27. Get into the engineer mode(Press “Menu” button in the EXAM interface then input the
yearly password, press enter)
Software upgrade procedure
PS: For this step no dialog box shows on the screen, just input the yearly password, and
enter.
28. Choose “dealer config”
Appendix A:
How to make a bootable USB disk for S22 via Linux live creator.
1. Get the 13.6 iso file of the kernel ;
2. Install “Linux live creator”, the exe file you can get on the internet;
3. Choose the language you need during the installation;
4. Choose the USB disk you will use for the bootable USB disk.
Software upgrade procedure
9. Copy the adata and asecure files into the folder “update”
10.