Professional Documents
Culture Documents
EE-SPX301/401 EE-SPY30/40: Photomicrosensor With Light Modulation Is Not Influenced by External Light
EE-SPX301/401 EE-SPY30/40: Photomicrosensor With Light Modulation Is Not Influenced by External Light
EE-SPX301/401
EE-SPY30/40
CSM_EE-SPX301_401 EE-SPY30_40_DS_E_4_2
Be sure to read Safety Precautions on For the most recent information on models that have been certified for
page 5. safety standards, refer to your OMRON website.
Ordering Information
Sensors Infrared light
Output
Appearance Sensing method Sensing distance Output type Model
configuration
Dark-ON EE-SPX301
Through-beam type
(with slot) 3.6 mm (slot width)
Light-ON EE-SPX401
Horizontal type
Dark-ON EE-SPY301
NPN
Reflective type 5 mm output
Light-ON EE-SPY401
Vertical type
Dark-ON EE-SPY302
Reflective type 5 mm
Light-ON EE-SPY402
1
EE-SPX301/401 EE-SPY30/40
Ratings and Specifications
15 mm
15 mm
15 mm
2 mm 2 mm 2 mm
Disk
Disk
2
EE-SPX301/401 EE-SPY30/40
Engineering Data (Reference Value)
Distance Y (mm)
12 12
11 11
10 10
Sensing object: Operates Sensing object: Operates Y
9 White paper 9 White paper
(15 × 15 mm2) Releases (15 × 15 mm2)
8 8 Releases
reflection factor: 90% reflection factor: 90%
7 7
6 6
Y
5 5
X
4 4
3 X 3
2 2
1 1
0 0
−5 −4 −3 −2 −1 0 1 2 3 4 5 −5 −4 −3 −2 −1 0 1 2 3 4 5
Distance X (mm) Distance X (mm)
EE-SPY302, EE-SPY402 EE-SPY302, EE-SPY402
Distance Y (mm)
Distance Y (mm)
12 12
11 11
Sensing object: Sensing object:
10 White paper 10 White paper
(15 × 15 mm2) (15 × 15 mm2)
9 9 reflection factor: 90%
reflection factor: 90%
8 8
7 7
6 6
X X
5 5
4 Y 4 Y
3 3
2 2
1 1
0 0
−5 −4 −3 −2 −1 0 1 2 3 4 5 −5 −4 −3 −2 −1 0 1 2 3 4 5
Distance X (mm) Distance X (mm)
Sensing Position Characteristics
EE-SPX301 (Z Direction) EE-SPX301 (Y Direction)
Dark ON Dark ON
Tr ON Tr ON
Tr OFF Tr OFF
0 1 2 3 4 5 6 7 8 0 1 2 3 4 5 6 7 8
Z (mm) Y (mm)
3
EE-SPX301/401 EE-SPY30/40
Receiver Output Excess Gain vs. Sensing Distance vs. Object Area
Sensing Distance Characteristics Characteristics
EE-SPY@@@ EE-SPY@@@
2 5
Operating level
1
0
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 12 22 32 52 72 102 202 302 502
Distance d (mm) Sensing area l2 (mm2)
Ta = 25°C
100 Vcc = 4.5 V
18
Sensing object: RL = 4.7 kΩ
90 Lead: AWG24
White paper (15 × 15 mm )
2
Vcc = 24 V 16
(A)
Length of cable = 0.5 m (reflection factor: 90%)
80
Thickness of cable = 14
70
Sensing object: 0.3 mm2 (B)
White paper (15 × 15 mm )
2
12
EE-SPY301
60 (reflection factor: 90%) EE-SPY302
10
50 C: 10 μF Attach externally
8
40
d d
+θ −θ +θ −θ 6 (A): Using direct cable extension.
30 (B): Using an externally attached
4 capacitance of 10 μF.
20
Operates
10 2 Releases
0 0
−40 −30 −20 −10 0 10 20 30 40 0.1 0.3 0.5 0.7 1.0 3 5 7 10
Angle θ (°) Length of cable (m)
4
EE-SPX301/401 EE-SPY30/40
I/O Circuit Diagrams
NPN Output
Output
Model Timing charts Output circuit
configuration
Incident
Interrupted
Light indicator ON
(red) OFF
EE-SPX401
ON
EE-SPY401 Light-ON Output
transistor OFF
EE-SPY402
Load 1 Operates Light indicator (red)
(relay) Releases
1.5 to 3 mA Load 1
H
Load 2
L Main OUT
5 to 24 VDC
circuit Ic
∗
Incident Load 2
Interrupted
Light indicator ON
(red) OFF
EE-SPX301 * Voltage output (when the sensor is connected to a transistor circuit)
ON
EE-SPY301 Dark-ON Output
transistor OFF
EE-SPY302
Load 1 Operates
(relay) Releases
H
Load 2
L
Safety Precautions
Refer to Warranty and Limitations of Liability.
WARNING
This product is not designed or rated for ensuring ● Wiring
safety of persons either directly or indirectly. • Connection is made using a connector. Do not solder to the pins
Do not use it for such purposes (leads).
• When extending the cable, use an extension cable with conductors
having a total cross-section area of 0.3 mm2. The total cable length
Precautions for Correct Use must be 2 m maximum.
Make sure that this product is used within the rated ambient • To use a cable length longer than 2 m, attach a capacitor with a
environment conditions. capacitance of approximately 10 μF to the wires as shown below.
● Mounting The distance between the terminal and the capacitor must be within
The sensing distance for the EE-SPY Reflective-type 2 m.
Photomicrosensor with built-in amplifier varies from 8 to 20 mm (Use a capacitor with a dielectric strength that is at least twice the
depending on the product (90% reflective white paper). Do not place Sensor's power supply voltage.)
glossy objects in the background of the sensing object.
5 to 24 VDC
+
A capacitor of
OUT 10 μF min.
−
0V
Extension cable
2 m max.
• Make sure the total length of the power cable connected to the
product is less than 10 m even if a capacitor is inserted.
5
EE-SPX301/401 EE-SPY30/40
(Unit: mm)
Dimensions Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Sensors
EE-SPX301 26
20
EE-SPX401 14
7.5
(3) (2) (1)
3
3-0.635
1.25 4.2
2.5 5
EE-SPY301 26
20
EE-SPY401 14
8
Terminal Arrangement
Sensing face
(1) Vcc
4
(2) OUT OUTPUT
Indicator window
(red) (3) GND (0 V)
20 14
Two,
3.2 dia.
6
3
7.5
(3) (2) (1)
3
3-0.635
1.25 4.2
2.5 5
EE-SPY302 26
20
EE-SPY402
14
3.5
7 4
8 Sensing face
Terminal Arrangement
(1) Vcc
Indicator (2) OUT OUTPUT
window (red) (3) GND (0 V)
20
Two,
3.2 dia.
6
3
7.5
(3) (2) (1)
3
3-0.635
1.25 4.2
2.5 5
6
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
2012.8
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2012 All Right Reserved.