Associated Ceramics Limited
PRODUCT TECHNICAL DATA SHEET
INSULATING CASTABLE
Product Name: ACL-SUPERLITE
Chemical Analysis Value
Silica - SiO. 33.3%
Alumina - AlOs 8.2%
Titania - TiO 0.5%
Iron Oxide - Fe20s 43%
Lime - CaO 71.8%
Magnesia - MgO 9.7%
‘Alkalies -Naj0 +0. 2.2%
Physical Properties Value,
Maximum Recommended Temperature B70°C
juantity Required 480 Kgs/me
Water required for mixing per 100 Kgs 130 Litres Approximately
Bulk Density After Heating at 105°C 450 - 610 Kgs/m*
Bulk Density After Heating at 815°C 430 - 560 Kgs/m?*
Modulus of Rupture After Heating at 105°C (05-2.0 MPa
Modulus of Rupture After Heating at 540°C 02-1.5MPa
Modulus of Rupture After Heating at 815°C (0.2-1.5 MPa.
Cold Crushing Strength After Heating at 105°C 05-3.0 MPa
Cold Crushing Strength After Heating at 540°C (05-3.0 MPa
old Crushing Strength After Heating at 815°C (05-3.0 MPa
Permanent Linear Change After Heating at 105°C
Permanent Linear Change After Heating at 540°C.
Permanent Linear Change After Heating at 815°C
Thermal Conductivity At 205°C
Thermal Conductivity ACAZ5°C
Thermal Conductivity At 650°C 0.17 W/mK
Packing. 25 Kgs Bag
Storage Life 6 Months
Note
Suitable for large areas with relatively thin lining as stack lining and large vessels, catalyst regenerator,
reactors etc. and for gunning, pouring and trowelling application
Teo vont
Chirkunda, Dhanbad-828202, Jharkhand, India. &S
E-mailexports@aclindia.in // sharad@aclindia.in
Ph: +91 6540 273061 // Mob: +91 9830411900 URAS