Professional Documents
Culture Documents
Heavy Ash System:: Conveyor 1: A. Remote Mode
Heavy Ash System:: Conveyor 1: A. Remote Mode
CONVEYOR 1 :
a. REMOTE MODE :
The conveyor will start if start p.b is pressed and conveyor 2 is running.
b. AUTO MODE :
The conveyor starts in auto if autom mode p.b and auto sequence start p.b are pressed and
conveyor 2 is running.
It stops when auto mode p.b and auto sequence stop p.b are pressed and ssc is not
running.
c. TRIP CONDITIONS :
CONVEYOR 2 :
a. REMOTE MODE :
The conveyor will start if start p.b is pressed
It will stop if stop p.b is pressed and ssc & conveyor 1 are not running
b. AUTO MODE :
The conveyor starts in auto if autom mode p.b and auto sequence start p.b are pressed and
conveyor 2 is running.
It stops when auto mode p.b and auto sequence stop p.b are pressed and ssc and
conveyor 2 are not running.
c. TRIP CONDITIONS :
The conveyor trips for any of the following conditions
START LOGIC :
It will start in remote mode when the following conditions are satisfied and start
p.b is preesed.
For the above conditions, it will start in auto, if the auto mode p.b and auto sequence
start p.b are pressed.
STOP LOGIC :
It stops in remote mode when stop p.b is pressed and in auto mode when auto mode
p.b and auto sequence p.b are pressed.