Professional Documents
Culture Documents
NPT 2g Parameters Ericsson r07b 07072011
NPT 2g Parameters Ericsson r07b 07072011
RECOMMENDED VALUES
RADIO NETWORK PLANNING (RNP)-JULY 2011
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
MSCNAME COMMON 1 - 7 Characters CHARS AS PLANNED AS PLANNED AS PLANNED
SITE NAME COMMON 1 - 15 CHARS AS PLANNED AS PLANNED AS PLANNED 1 to 7 characters except ALL.
characters
EVALTYPE COMMON 1,3 INTEGER 3 3 3 Cell ranking by the Ericsson3 locating algorithm
Cell name. It is recommended to use the name of the site
1 to 7 plus one more character that identifies the cell within the
CELL COMMON characters CHARS AS PLANNED AS PLANNED AS PLANNED site. The best choice for this character is a number (1,2,3...)
except ALL or a letter (A,B,C...) identifying the antenna pointing
direction of the c
MCC:3 digits,
MNC:2 or 3
digits
(depending on AS CGI (Cell Global Identity) is the global identity of the cell in
CGI COMMON AS PLANNED AS PLANNED AS PLANNED the whole system. It is composed of four different
MNCDIGITHAN PLANNED
D), LAC: 1 to parameters: MCC-MNC-LAC-CI.
65535, CI: 0 to
65535
1 to 124 (GSM ARFCN AS PLANNED (GSM900) AS PLANNED AS PLANNED Absolute RF channel number.
BCCHNO COMMON 900). 512 to
885 (GSM
1800).
ARFCN AS PLANNED (GSM1800) AS PLANNED AS PLANNED Absolute RF channel number.
COMB, COMBC,
BCCHTYPE COMMON NCOMB - NCOMB NCOMB NCOMB Type of BCCHs : COMB, COMBC, NCOMB
UL UL UL
SCTYPE COMMON UL, OL Subcell type
OL OL OL
Training Sequence Code. It refers to Base station colour
TSC COMMON 0 to 7 - AS PLANNED 0 7 code (BCC)
8 to 128 in
AS PLANNED AS PLANNED The
number of required basic physical channels (BPCs) in a
NUMREQBPC COMMON steps of 8, - AS PLANNED channel group.
SYSDEF
CHANNEL GROUP DATA
0 to 7 (normal
TN COMMON cell). - 1 1 2 TS where SDCCH will be located.
CBCH COMMON YES, NO - YES AS PLANNED AS PLANNED Cell broadcast channel. CBCH cannot be defined for an
overlaid subcell.
- DEFAULT AS PLANNED AS PLANNED
MAIO COMMON 0-31, DEFAULT Mobile Allocation Index Offset.
AS PLANNED AS PLANNED AS PLANNED
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
(GSM900) 33 33 33
13-43 in steps Maximum transceiver power level an MS may use when
of 2 (GSM 900); accessing on a control channel. NOTE:
CCHPWR COMMON dBm
4-30 in steps of (GSM1800) 30 30 30 Analyze STS performance of RACH to determine
2 (GSM 1800) correct settings on indoor cells
NCCPERM COMMON 0 to 7 (BATAM: 2,3,7) (Network Colour Code) on the BCCH carriers for which the
(BATAM: 2,3,7) 2 3,7 MS is permitted to send measurement reports.
TX COMMON 3 to 12,14,16, - 32 32 32 Defines the number of timeslots over which the MS may
20,25,32,50 spread transmission when accessing the system.
SACCH
Minimum time before handover is allowed on an initial call
TINIT COMMON 0 to 120 period 10 10 10
(480ms) or after handover.
SACCH
Minimum time between allocation attempts at an urgency
TURGEN COMMON 0 to 120 period 2 2 2
(480ms) condition and when the first allocation attempts has failed.
TAAVELEN COMMON 0 to 120 - 4 4 4 Timing advance average length. Number of values in the
avereging of timing advance.
IBHOSICH COMMON ON, OFF - OFF OFF OFF switch, which defines if, inter BSC handover on signaling
channel is allowed.
IHOSICH COMMON ON, OFF - OFF OFF OFF switch, which defines if, intra-cell handover on signaling
channel is allowed.
ASSOC COMMON ON, OFF - OFF OFF OFF switch,which defines if assignment to cells other than
serving cell is allowed.
IBHOASS COMMON ON, OFF - OFF OFF OFF switch, which defines if inter BSC handover is allowed
during assignment.
SSRAMPSI COMMON 1 to 20 SACCH 1 1 1 Ramping length of signal strength filter for signalling only.
0 to 63 (normal
TALIM COMMON range cell). 0 to Bit periods 62 62 62 Timing advance limit for handover. Urgency detection
219 (extended (bp) parameter.
range cell).
PSSTA COMMON 0 to 63 dB 63 63 63 Signal strength penalty when handover due to too large
timing advance. This penalty is valid during PTIMTA.
PTIMBQ COMMON 0 to 600 Seconds 10 10 15 Penalty time when handover due to bad quality.
Penalty time when handover due to too large timing
PTIMTA COMMON 0 to 600 Seconds 10 10 15 advance.
Deci
transforme Quality limit downlink for handover. Urgency detection
QLIMDL COMMON 0 to 100 d GSM 55 55 55
parameter.
quality
units (dtqu)
Deci
transforme Quality limit uplink for handover. Urgency detection
QLIMUL COMMON 0 to 100 d GSM 55 55 55 parameter.
quality
units (dtqu)
Deci
transforme Uplink quality threshold for bad quality urgency handovers
QLIMULAFR COMMON 0 to 100 d GSM (GSM900) 55 55 60
quality for AMR FR connections.
units (dtqu)
Deci
transforme Downlink quality threshold for bad quality urgency
QLIMDLAFR COMMON 0 to 100 d GSM (GSM900) 55 55 60
quality handovers for AMR FR connections.
units (dtqu)
function.
OPTIMISATION RANGE
0 to 63 (normal
MAXTA COMMON cell). 0 to 219 Bit periods 63 63 63 Maximum timing advance before an MS is considered lost.
(extended (bp)
range cell).
GPRS/EDGE CR CELL
DATA Hierarchical cell threshold for GPRS/EGPRS traffic for cells
with defined PBCCH. It takes a positive value, which
MAPPED, 48, dBm
PHCSTHR COMMON 50,... 110 (negative) MAPPED MAPPED MAPPED represents the corresponding negative value in
calculations. The value MAPPED specifies that the
threshold is mapped from CS parameters.
CSPSNOPRF,
0 to 16 optional preference parameter for the number of semi-
SPDCH COMMON CSNOPRFPSFIR - 2 2 2
dedicated PDCHs
ST,
CSNOPRFPSLA This parameter determines if non-hopping TCHs
ST,
CSPSALLOC COMMON CSFIRSTPSNOP - CSPSNOPRF CSPSNOPRF CSPSNOPRF on the BCCH frequency should be selected first,
RF, last or if there is no preference at CS and PS
CSFIRSTPSLAS allocation
GPRS/EGPRS CHANNEL T,
ADMINISTRATION CELL CSLASTPSNOP
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
GPRS/EGPRS CHANNEL
ADMINISTRATION CELL This parameter restricts and prioritise GPRS/EGPRS traffic
DATA UL, OL,
SCALLOC COMMON BOTHUL, - UL UL UL to a certain subcell: 1.
UL - GPRS/EGPRS is restricted to the underlaid subcell
BOTHOL 2. OL - GPRS/EGPRS is restricted to the overlai
DMPSTATE: COMMON ACTIVE, - ACTIVE ACTIVE ACTIVE Dynamic MS power control state.
INACTIVE
ACTIVE,
AMRPCSTATE: COMMON INACTIVE - INACTIVE INACTIVE INACTIVE Dynamic MS power control state for AMR
SACCH
SSLENUL COMMON 3 to 15 period 5 5 5 Length of stationary signal strength filter.
(480ms)
SACCH
QLENUL COMMON 1-20 period 6 6 6 Length of the uplink quality filter.
(480ms)
ACTIVE,
AMRPCSTATE: COMMON INACTIVE INACTIVE INACTIVE INACTIVE Dynamic MS power control state for AMR
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
REGINTDL COMMON 1 to 10 periods 1 1 1 Defines the minimum interval between power order
(480ms) commands.
SACCH
SSLENDL COMMON 3 to 15 periods 3 3 3 Length of downlink signal strength filter.
(480ms)
SACCH
QLENDL COMMON 1 to 20 periods 3 3 3 Length of the downlink quality filter.
(480ms)
Minimum allowed output power for the BTS at the
BSPWRMIN COMMON -20 to +50 dBm 20 20 20 locating reference point, on the non-BCCH frequencies.
(negative values)
QOFFSETULAFRN COMMON −50 to +50 dB 0 0 0 Offset for quality uplink for AMR FR connections.
QOFFSETULAFRP COMMON −50 to +50 dB 0 0 0 Offset for quality uplink for AMR FR connections.
INTRA CELL
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
QOFFSETDLAFRN COMMON −50 to +50 dB 0 0 0 Offset for quality downlink for AMR FR connections.
QOFFSETDLAFRP COMMON −50 to +50 dB 0 0 0 Offset for quality downlink for AMR FR connections.
SSOFFSETULAFRN COMMON -30 to +30 dB 0 0 0 Offset for signal strength uplink for AMR FR connections.
SSOFFSETULAFRP COMMON -30 to +30 dB 0 0 0 Offset for signal strength uplink for AMR FR connections.
SSOFFSETDLAFRN COMMON -30 to +30 dB 0 0 0 Offset for signal strength downlink for AMR FR
connections.
Offset for signal strength downlink for AMR FR
SSOFFSETDLAFRP COMMON -30 to +30 dB 0 0 0
connections.
LOL COMMON 0 to 150 dB NOT APPLIED NOT APPLIED NOT APPLIED Pathloss threshold.
LOLHYST COMMON 0 to 63 dB NOT APPLIED NOT APPLIED NOT APPLIED Hysteresis for pathloss.
TAOL COMMON 0 to 61 Bit periods NOT APPLIED NOT APPLIED NN Timing advance threshold. See the comments of LOL.
(bp)
TAOLHYST COMMON 0 to 61 Bit periods NOT APPLIED NOT APPLIED NOT APPLIED Hysteresis for timing advance.
OVERLAID SUBCELL (bp)
LOCATING DATA
DTCB COMMON -63 to 63 dB NOT APPLIED NOT APPLIED NOT APPLIED Timing advance threshold. See the comments of LOL.
DTCBHYST COMMON 0 to 63 dB NOT APPLIED NOT APPLIED NOT APPLIED Hysteresis for timing advance.
NDIST COMMON 0 to 63 dB NOT APPLIED NOT APPLIED NOT APPLIED Timing advance threshold. See the comments of LOL.
NNCELLS COMMON 1 to 5 - NOT APPLIED NOT APPLIED NOT APPLIED Hysteresis for timing advance.
SCLD COMMON ON, OFF - OFF OFF OFF Subcell Load Distribution status.
Subcell load distribution subcell priority. Specifies which
SCLDSC COMMON UL, OL - UL UL UL
SUBCELL LOAD subcell that is preferred at channel allocation.
DISTRIBUTION DATA SCLDLOL COMMON 0 to 99 % 20 20 20 Subcell Load Distribution lower limit overlaid subcell.
SCLDLUL COMMON 0 to 99 % 20 20 20 Subcell Load Distribution lower limit underlaid subcell.
51-
87(GSM900),
MBCCHNO COMMON 574-610,687- ARFCN AS PLANNED AS PLANNED AS PLANNED Absolute RF channel number for measurement on BCCH.
710,787-836
(GSM1800)
51-
87(GSM900),
MBCCHNO COMMON 574-610,687- ARFCN AS PLANNED AS PLANNED AS PLANNED Absolute RF channel number for measurement on BCCH.
710,787-836
(GSM1800)
SACCH
INTAVE COMMON 1 to 31 periods 6 6 6 The number of measurements that should be used in the
(480ms) calculation of the interference band for a channel.
IDLE CHANNEL
MEASUREMENTS CELL
DATA
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
IDLE CHANNEL LIMIT1 COMMON 0 to 59 - 2 2 2 Interference measurements in band 1 which have values
MEASUREMENTS CELL ranging from LIMIT1 and below.
DATA
Interference measurements in band 2 which have values
LIMIT2 COMMON 1 to 60 - 6 6 6 ranging from LIMIT1 up to and including LIMIT2
HOCLSACC COMMON ON, OFF - ON ON ON Handover due to Cell load sharing accepted to this cell.
Channel rate.
COMMON FR, HR - AS PLANNED AS PLANNED AS PLANNED FR The channel rate is FR (full rate).
HR The channel rate is HR (half rate).
Parameter CHRATE is only valid for channel type TCH.
CHRATE
SDCCH Level.
Level of remaining SDCCH subchannels when an attempt
SLEVEL COMMON 0 to 2, CONG. - 1 1 1
to increase the number of SDCCH/8 by reconfiguring a
ADAPTIVE TCH to an SDCCH/8 will take place.
CONFIGURATION OF
LOGICAL CHANNELS
MFDDARFCN:
0 to 16383.
MSCRCODE: 0 (10663-SC-DIV) AS UTRAN Measurement Frequency Information for cell
UMFI COMMON AS PLANNED AS PLANNED reselection in GSM Idle Mode and GPRS/EGPRS Ready
to 511. PLANNED
DIVERSITY: and Standby states.
DIV or NODIV.
Search priority.
Indicates if 3G cells may be searched when BSIC decoding
is
SPRIO COMMON NO, YES. YES YES YES required.
NO Multi-RAT MS may not use the search frames required
for BSIC decoding, for UTRAN FDD measurements.
YES Multi-RAT MS may use up to 25 search frames per 13
seconds wit
ER CELL DATA
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
Multi-Rat reporting.
FDDMRR defines how many measured neighbouring
FDDMRR COMMON 0 to 3 - 0 0 0 UTRAN cells should be included in measurement reports.
The remaining positions in measurement reports will be
used for reporting GSM cells according to the parameter
MBCR. If there are sti
0 0 dB
dB 1 2 dB
FDDQMINOFF COMMON 0 to 7 0 0 0
(step 2)
.....
7 14 dB
.....
15 -84 dB
LA COMMON ON, OFF. ON ON ON Activates and deactivates the feature GPRS Link
GPRS LINK Adaptation.
ADAPTATION NA, CS-1, CS-2,
CHCSDL COMMON CS-2 CS-2 CS-2 Coding Scheme for the downlink.
CS-3, CS-4.
Defines the minimum estimated bitrate per B-PDCH in cell
BPDCHBR COMMON 1 to 12 kbps 12 12 12 used for transfer of the traffic class Streaming.
OPTIMISATION RANGE
FEATURES PARAMETERS GROUPS Range Unit OPTIMUM VALUE Remarks
MIN MAX update
GPDCHBR COMMON 1 to 20 kbps 14 14 14 Defines the minimum estimated bitrate per G-PDCH in cell
GPRS/EGPRS QUALITY used for transfer of the traffic class Streaming.
OF SERVICE Defines the minimum estimated bitrate per E-PDCH in cell
EPDCHBR COMMON 1 to 60 kbps 20 20 20
used for transfer of the traffic class Streaming.
Activates and deactivates the feature QoS Streaming on cell
STREAMSUP COMMON YES, NO - YES YES YES level.
INTERFERENCE
IRC COMMON ON, OFF - OFF OFF OFF Activates Interference Rejection Combining (IRC).
REJECTION COMBINING
dB 0 0 0
(positive)
Defines the difference in pathloss between the BCCH
dB 0 0 0 frequency band group and the non-BCCH frequency band
FBOFFSP COMMON -40 to 40 (positive) group. Positive values are used when the BCCH frequency
dB band group is assumed to offer "better" coverage than the
(positive) 0 0 0 non-BCCH frequency band group.
dB 0 0 0
(positive)
MULTI BAND CELL
dB 0 0 0
(positive)
dB
0 0 0
(positive)
Defines the if the Dynamic Half Rate (HR) to Full Rate (FR)
DMQB COMMON ON, OFF - OFF OFF OFF Mode Adaptation due to bad quality is active (ON) or
inactive (OFF).
Defines the if the Dynamic Full Rate (FR) to Half Rate (FR)
DMQG COMMON ON, OFF - OFF OFF OFF Mode Adaptation quality evaluation is active (ON) or
inactive (OFF).
COMMON - 28 AS PLANNED AS PLANNED this parameter determines the max time it is allowed to do
assignment for a priority connection
QASSTIME 1 to 60
Enhanced Multi-Level channel resource limit. It indicates the percentage of radio
Precedence and Pre-
emption Service COMMON - 25 AS PLANNED AS PLANNED channel resources, TCH/F and TCH/H, that are allocated to
priority connections before starting to give available
(eMLPP) Cell Data channels to non priority connections.
RESLIMIT 1 to 100
max queue length in a cell. It determines the max number
COMMON - 5 AS PLANNED AS PLANNED of priority connections (PC) that can be inserted in the
QLENGTH 0 to 32. queue.
LAPDm
AS PLANNED AS PLANNED It
is used to control the max length of the GPRS signalling
COMMON frames 5 messages sent on the FACCH.
MAXLAPDM 5 to 12
it is used as a preference at a DTM channel allocation in
some situations ; whether the TCH (CS part) in a DTM
COMMON - QUAL AS PLANNED AS PLANNED connection shall be allocated with max specch quality
considerations or with packing considerations (to prefer a
Dual Transfer Mode TCH/HR)
(DTM) Cell Data ALLOCCPREF QUAl, PACK
COMMON - - - - defines the optional DTM multislot classes supported in a
OPTMSCLASS 11 cell.
defines for which the optional DTM multislot classes shall
COMMON - - - -
OPTMSCLASSAD 11 be added in a cell.
defines for which the optional DTM multislot classes shall
COMMON - - - - be removed in a cell.
OPTMSCLASSREM 11
CELL DESIGN DATA (CDD) ERICSSON'S GSM SYSTEM R10
RECOMMENDED VALUES
RADIO NETWORK PLANNING (RNP)-JUNE 2009
OPTIMISATION RA
OPTIMUM VALUES
MG MG MD
FEATURES PARAMETERS GROUPS Range Unit MG MD IG ID OG OD
FEATURES MIN MAX MIN MAX MIN MAX
COMMON CELL DATA
13 to 43
(GSM900) . 4 to
MSTXPWR CLUSTER 30 (GSM1800). dBm 33 30 33 30 33 30 33 33 33 33 30 30
Odd values
only.
0 to 63 Multiply
CRO CLUSTER (multiply with with 2 dB
2 dB)
0 12 18 19 0 15 0 0 0 0 12 15
TO CLUSTER 0 to 7 x10 dB
0 0 4 4 0 4 0 0 0 0 0 0
PT CLUSTER 0 to 31 nx20
Seconds
0 0 2 2 0 1 0 0 0 0 0 0
Locating Basic Cell
Ranking Data
SACCH
RLINKUP CLUSTER 1 to 63 periods 32 28 36 36 28 28 28 36 28 36 28 32
(480ms).
Locating Misc Cell Data
SACCH
RLINKUPAFR CLUSTER 1 to 63 periods 32 28 36 36 28 28 28 36 28 36 28 32
(480ms).
SACCH
RLINKUPAHR CLUSTER 1 to 63 periods 32 28 36 36 28 28 28 36 28 36 28 32
(480ms).
SACCH
RLINKT CLUSTER 8 to 64 in steps periods 32 28 36 36 28 28 28 36 28 36 28 32
of 4 (480ms).
Control Cell
ER CONTROL CELL DATA
MS Power
Cell Data
QDESDL CLUSTER 0 to 70 dtqu 30 30 30 30 30 30 30 30 30
LAYER CLUSTER 1 to 8 - 7 6 3 2 5 4 7 7 7 7 6 6
HCS CELL DATA
`
OPTIMISATION RANGES
ALL
IG ID OG OD
Remarks
MIN MAX MIN MAX MIN MAX MIN MAX update
Base Station output power in dBm for the BCCH RF channel
33 33 33 33 33 33 33 33 number. For Indoor/streetcell, if it requires RBS2202/6/7,
BSPWRB is dependent on design.
range value = 92 - 95
INTERNAL CELL
RELATION ADJACENCE SINGLE, Omitted. RELATIONS - AS PLANNED
MG
INTERNAL CELL
RELATION ADJACENCE SINGLE, Omitted. - AS PLANNED
RELATIONS
MD
KOFFSET ADJACENCE -63 to 63 GSM1800 (MACRO) dB 0
MD
IG
INTERNAL CELL
RELATION ADJACENCE SINGLE, Omitted. - AS PLANNED
RELATIONS
ID
INTERNAL CELL
RELATION ADJACENCE SINGLE, Omitted. RELATIONS - AS PLANNED
OG
INTERNAL CELL
RELATION ADJACENCE SINGLE, Omitted. RELATIONS - AS PLANNED
OD
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2 2 2 2 2 2 1 3 1 3 1 3 1 3 1 3 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
90 90 90 90 90 90 92 85 92 85 92 85 92 85 92 85 92
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2 2 2 2 2 2 1 3 1 3 1 3 1 3 1 3 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
88 88 88 88 88 88 90 85 90 85 90 85 90 85 90 85 90
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2 2 2 2 2 2 1 3 1 3 1 3 1 3 1 3 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
80 80 80 80 80 80 87 80 87 80 87 80 87 80 87 80 87
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2 2 2 2 2 2 1 3 1 3 1 3 1 3 1 3 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
80 80 80 80 80 80 87 80 87 80 87 80 87 80 87 80 87
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2 2 2 2 2 2 1 3 1 3 1 3 1 3 1 3 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
75 75 75 75 75 75 87 80 87 80 87 80 87 80 87 80 87
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2 2 2 2 2 2 1 3 1 3 1 3 1 3 1 3 1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
5 5 5 5 5 5 4 6 4 6 4 6 4 6 4 6 4
3 3 3 3 3 3 2 4 2 4 2 4 2 4 2 4 2
88 88 88 88 88 88 88 80 88 80 88 80 88 80 88 80 88
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
OD
Max REMARKS
Related cell designation. The identity of the neighbouring cell for which the set of parameters should be applied is
specified by means of CELLR. The name of the neighbouring cell must be specified here.
External cell, If the neighbouring cell belongs to another BSC then this must be specified explicitly by means of CTYPE.
Related cell designation. The identity of the neighbouring cell for which the set of parameters should be applied is
specified by means of CELLR. The name of the neighbouring cell must be specified here.
External cell, If the neighbouring cell belongs to another BSC then this must be specified explicitly by means of CTYPE.
Related cell designation. The identity of the neighbouring cell for which the set of parameters should be applied is
specified by means of CELLR. The name of the neighbouring cell must be specified here.
External cell, If the neighbouring cell belongs to another BSC then this must be specified explicitly by means of CTYPE.
Related cell designation. The identity of the neighbouring cell for which the set of parameters should be applied is
specified by means of CELLR. The name of the neighbouring cell must be specified here.
External cell, If the neighbouring cell belongs to another BSC then this must be specified explicitly by means of CTYPE.
Related cell designation. The identity of the neighbouring cell for which the set of parameters should be applied is
specified by means of CELLR. The name of the neighbouring cell must be specified here.
External cell, If the neighbouring cell belongs to another BSC then this must be specified explicitly by means of CTYPE.
Related cell designation. The identity of the neighbouring cell for which the set of parameters should be applied is
specified by means of CELLR. The name of the neighbouring cell must be specified here.
External cell, If the neighbouring cell belongs to another BSC then this must be specified explicitly by means of CTYPE.
trial value = 3
Feature Controlling Parameters
Parameter name Default value Recommended Current
value
BSC COEXUMTS 0 (OFF) - 1
BSC NCPROF 1 1 0
UTRAN FDDARCN - - -
UTRAN SCRCODE - - -
LOCATING1 ISHOLEV 20 0
SYSINFO2 FDDREPTHR2 0 (disabled) 16 (-100dBm) 0
SYSINFO2 FDDMRR 0 0
LOCATING1 MAXISHO 2 2 -
4 0 (OFF), 1 (ON), 2
(ONADDINFO), 3
(ONADDINFO), 4
(ONADDINFO)
0 0 (OFF), 1 (ON)
0 1 (Optimized -
throughput at GSM
to WCDMA Cell
Change)
Values 2 — 255 are
undefined.
7 0 to 7 (-20dB, -6dB, dB
-18dB, -8dB, -16dB,
-10dB, -14dB,
-12dB)
0 0 to 7 (0 to 14 dB in dB
steps of 2dB)
0 0 to 15 (-inf, -28dB dB
to +28dB in steps of
4dB)
6 (-102 dBm) 0 to 15 (-114 dBm dBm
to – 84 dBm in steps
of 2 dBm)
7 (always) 0 to 6 (below dBm
-98dBm to -74dBm
in steps of 4dBm) 7
(always) 8 to 14
(above -78dBm to
-54dBm in steps of
4dBm) 15 (never)
Trial TC, 0 to 99 %
TC1 = 99
TC2 = 40
TC3 = 20
20 (> -95) 0 to 63
0 disabled
1 -115dBm
2 -114dBm
.
.
62 - 54dBm
63 - 53dBm
Trial TC 0 to 3
TC1 = 2
TC2 = 1
TC3 = 1
7 (Always) 0 to 6 (below
-98dBm to -74dBm
in steps of 4dBm) 7
(always) 8 to 14
(above -78dBm to
-54dBm in steps of
4dBm) 15 (never)
is used to control the time interval between traffic load checking. This parameter is a
BSC exchange property.
indicates the absolute RF channel number of the neighbouring UTRAN cell in GSM
active mode. Several frequency bands exist and the absolute RF channel number
represents the center frequency within the frequency band. Allowed frequency bands
and absolute RF channel numbers are described in detail in Reference [12]. This
parameter is defined per UTRAN cell.
is the scrambling code for the neighbouring UTRAN cell in active mode. The scrambling
code has 512 combinations. This parameter is defined per UTRAN cell.
UTRANID present the Identity of the neighbouring UTRAN cell in active mode. It
consists of the RNC Identity (RNCID), Cell Identity within the RNC (CI), MCC, MNC and
LAC. This parameter is defined per UTRAN cell.
defines a minimum threshold for the "quality" measure Ec/No for handovers to UTRAN.
This parameter is defined per UTRAN cell.
defines the traffic load threshold of the serving GSM cell that needs to be exceeded in
order to evaluate UMTS measurements for handovers. This parameter is defined per
GSM cell.
defines a threshold for the non reported “signal strength” measure CPICH RSCP of
UTRAN cells. The MS includes a UTRAN cell in the measurement reports only if the non
reporting threshold is exceeded. It shall be noted that the reporting entity in the
measurement reports is CPIC Ec/No. This parameter is defined per GSM cell.
defines the number of UTRAN cells that the mobile should include in measurement
reports. For a detailed description see Section 3.3.3.2. This parameter is defined per
GSM cell.
defines if the monitoring of UMTS cells will be performed if the signal level is below (0-
6) or above the threshold (8-14). always (7) or never (15). This parameter is defined
per GSM cell.
defines the control of UTRAN measurement after entering active mode, before reading
the first QSC. In that period UTRAN measurements can always be performed (=1) or
according to QSI value (=0). This parameter is defined per GSM cell.
defines the maximum number of allowed handovers to trigger to UTRAN per second.
Only handovers that are triggered because of traffic load in the GSM cell are counted
or limited. This parameter is defined per GSM cell.
indicates if 3G cells may be searched when BSIC decoding is required. This parameter
is defined per GSM cell.
CDD DEFAULT TELKOMSEL R07 B - REVISION D
Site Data
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
COMMON MSCNAME 1 - 7 Characters PER CELL AS PLANNED AS PLANNED AS PLANNED AS PLANNED NA
Radio Site. Identity of the radio site where the transceiver
COMMON RSITE 1 - 15 characters PER CELL AS PLANNED AS PLANNED AS PLANNED AS PLANNED NA group (TG) is located. Normally RSITE refers to SITENAME.
(1-15 characters)
All AREA 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 NA BSIC is defined on a per cell basis and it is sent on the
COMMON BSIC (NCC) NCC: 0 to 7 logical synchronisation channel (SCH) on the BCCH
BATAM, BINTAN, KARIMUN 2,3,7 2,3,7 2,3,7 2,3,7 NA
frequency.
BSIC is defined on a per cell basis and it is sent on the
COMMON BSIC (BCC) BCC: 0 to 7 ALL AREA 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 NA logical synchronisation channel (SCH) on the BCCH
frequency.
GSM900 MACRO Base Station output power in dBm for the BCCH RF channel
47 47 47 47 47 number. For Indoor/streetcell, if it requires RBS2202/6/7,
(RBS2202/2106/2206)
BSPWRB is dependent on design.
GSM900 MACRO WITH TCC 51 51 51 51
GSM1800 MACRO 45 45 45 45 45
(RBS2202/2106/2206)
GSM1800 MACRO WITH TCC 49 49 49 49
GSM900 MACRO (RBS2207) 47 47 47 47
GSM1800 MACRO (RBS2207) 45 45 45 45
CLUSTER BSPWRB 0 to 63 dBm
STREETCELL
(RBS2302/2306/2308) 33 33 33 33 33
INDOOR CELL 33 33 33 33 33
(RBS2302/2306/2308)
STREETCELL (RBS2309) 37 37 37 37
INDOOR CELL (RBS2309) 37 37 37 37
INDOOR . MICROCELL OUTDOOR As per RF As per RF As per RF
USED FULL BTS design. design. As per RF design. design. 33
Absolute RF channel number.
GSM900 51-87 51-87 51-87 51-87 ARFCN NA
1 to 124 (GSM 900).
COMMON BCCHNO 512 to 885 (GSM Absolute RF channel number.
1800). 574-610, 687- 574-610, 687- 574-610, 687- 574-610, 687-
GSM1800 710, 787-836. 710, 787-836. 710, 787-836. 710, 787-836. ARFCN NA
IF 1 TRU PER CELL NCOMB NCOMB NCOMB NCOMB NCOMB Type of BCCHs : COMB, COMBC, NCOMB
COMMON BCCHTYPE COMB, COMBC, -
NCOMB IF> 1 TRU PER CELL NCOMB NCOMB NCOMB NCOMB NCOMB
Number of reserved access grant blocks. Number of CCCH
0 to 7 if NCOMB is blocks reserved for the access grant channel. The
COMMON AGBLK used. 0 to 2 if COMB ALL 1 1 1 1 - 1 remaining CCCH blocks are used for the paging channel.
is used.
GSM900 MACRO Base Station output power in dBm for theTCH RF channel
47 47 47 47 47 number. For Indoor/streetcell, if it requires RBS2202/6/7,
(RBS2202/2106/2206)
BSPWRB is dependent on design.
GSM900 MACRO WITH TCC 51 51 51 51
GSM1800 MACRO
(RBS2202/2106/2206) 45 45 45 45 45
GSM1800 MACRO WITH TCC 49 49 49 49
GSM900 MACRO (RBS2207) 47 47 47 47
GSM1800 MACRO (RBS2207) 45 45 45 45
CLUSTER BSPWRT 0 to 63 dBm
STREETCELL
33 33 33 33 33
(RBS2302/2306/2308)
INDOOR CELL
33 33 33 33 33
(RBS2302/2306/2308)
STREETCELL (RBS2309) 37 37 37 37
INDOOR CELL (RBS2309) 37 37 37 37
INDOOR . MICROCELL OUTDOOR As per RF As per RF As per RF
USED FULL BTS design. design. As per RF design. design. 33
CHGR0 (SY) 1 TRU 1 1 1 1 Required number of SDCCH/8. Call set up, location
CHGR1 (SY) 1 TRU 0 0 0 0 updating and SMS are using the SDCCH channel. The
system supports four types of ombination for SDCCH
CHGR1 (SY) 2 TRU 1 1 1 1 channels: SDCCH/4, SDCCH/4 including CBCH, SDCCH/8
CHGR1 (SY) 3 TRU 2 2 2 2 and SDCCH/8 including CBCH.
CHGR1 (SY) 4 TRU 2 2 2 2
CHGR1 (SY) 5 TRU 3 3 3 3
COMMON SDCCH 0 to 32. CHGR1 (SY) 6 TRU 3 3 3 3 -
CHGR0 (BB) 1 TRU 1 1 1 1
CHGR0 (BB) 2 TRU 1 1 1 1
CHGR0 (BB) 3 TRU 2 2 2 2
CHGR0 (BB) 4 TRU 3 3 3 3
CHGR0 (BB) 5 TRU 4 4 4 4
CHGR0 (BB) 6 TRU 4 4 4 4
CHGR0 1 1 1 1 - 1 TS where SDCCH will be located.
COMMON TN 0 to 7 (normal cell).
CHGR1 1 1 1 1 1
Cell broadcast channel. CBCH cannot be defined for an
COMMON CBCH YES, NO ALL YES YES YES YES - YES overlaid subcell.
CHGR0 DEFAULT DEFAULT DEFAULT DEFAULT - DEFAULT Mobile Allocation Index Offset.
COMMON MAIO 0-31, DEFAULT
CHGR1 AS PLANNED AS PLANNED AS PLANNED AS PLANNED AS PLANNED
CELLS FACING LAC BORDER 14 14 14 14 14 Cell Reselection Hysteresis. Receiving signal strength
CLUSTER CRH 0 to 14 in steps of 2 dB (rxlev) hysteresis for required cell re-selection over
ALL OTHER CELLS 14 14 14 14 14
location area border.
SUMATRA ISLAND 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 0,1,2,3,4,5,6,7 PLMN (NCC) Permitted. Defines the allowed NCCs
COMMON NCCPERM NCC: 0 to 7 (Network Colour Code) on the BCCH carriers for which the
BATAM, BINTAN, KARIMUN 2,3,7 2,3,7 2,3,7 2,3,7
MS is permitted to send measurement reports.
Cell bar access. Defines whether the cell is barred for
COMMON CB YES, NO ALL NO NO NO NO - NO access or not.
COMMON SIMSG 1,7,8 ALL CELLS 1,7,8 1,7,8 1,7,8 1,7,8 1,7,8 System Information BCCH Message.
SIMSG=1 ON ON ON ON ON System Information BCCH Message distribution.
COMMON MSGDIST ON, OFF SIMSG=7 OFF OFF OFF OFF - OFF
SIMSG=8 OFF OFF OFF OFF OFF
COMMON CBQ HIGH, LOW ALL CELLS HIGH HIGH HIGH HIGH 0 HIGH Cell Bar Qualify.
COMMON ACC 0 to 15, CLEAR ALL CELLS CLEAR CLEAR CLEAR CLEAR - CLEAR Access Control Class.
Maximum retransmissions. Defines maximum number of
TERRESTERIAL TRANSMISSION 2 2 2 2 retransmissions an MS may do when accessing the system
COMMON MAXRET 1,2,4,7 - 2
on RACH.
IDR TRANSMISSION 2 2 2 2
Defines the number of timeslots over which the MS may
3 to 12,14,16, TERRESTERIAL TRANSMISSION 32 32 32 32 50 spread transmission when accessing the system.
COMMON TX -
20,25,32,50
IDR TRANSMISSION 32 32 32 32 32
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
COMMON ATT YES,NO ALL CELLS YES YES YES YES - YES Attach-detach allowed.
T3212 time-out value. Defines the time-out value that
controls the location updating procedure, i.e. when
COMMON T3212 0 to 255 ALL CELLS 40 40 40 40 Deci hours 40 notifying the availability of the MS to the network. (GSM
04.08, section 10.5.2.11).
SACCH
Timing advance average length. Number of values in the
Common TAAVELEN 0 to 120 BSC Level 4 4 4 4 period 4
(480ms) avereging of timing advance.
Common IHOSICH ON, OFF BSC Level OFF OFF OFF OFF - OFF switch, which defines if, intra-cell handover on signaling
channel is allowed.
switch,which defines if assignment to cells other than
Common ASSOC ON, OFF BSC Level OFF OFF OFF OFF - OFF serving cell is allowed.
switch, which defines if inter BSC handover is allowed
Common IBHOASS ON, OFF BSC Level OFF OFF OFF OFF - OFF during assignment.
COMMON SSLENSD 1 to 20 ALL CELLS 10 10 10 10 SACCH 10 Length of signal strength filter for speech/data.
COMMON QLENSD 1 to 20 ALL CELLS 6 6 6 6 SACCH 6 Length of quality filter for speech/data.
COMMON SSLENSI 1 to 20 ALL CELLS 4 4 4 4 SACCH 4 Length of signal strength filter for signalling only.
COMMON QLENSI 1 to 20 ALL CELLS 4 4 4 4 SACCH 3 Length of quality filter for signalling only.
Ramping length of signal strength filter for speech/data.
COMMON SSRAMPSD 1 to 20 ALL CELLS 5 5 5 5 SACCH 5
Ramping length of signal strength filter for signalling only.
COMMON SSRAMPSI 1 to 20 ALL CELLS 2 2 2 2 SACCH 1
Maximum number of consecutive missing measurements
for a serving cell or neighbouring cell permitted before all
old measurements are considered invalid.
COMMON MISSNM 0 to 18 ALL CELLS 3 3 3 3 - 3
GSM900 MACRO BTS Output power (ERP) on all non - BCCH frequency
47 47 47 47 53 (overlay). BSTXPWR is defined at the reference point used
(RBS2202/2106/2206)
in the locating algorithm. Indoor value valid for Micro RBS
GSM900 MACRO WITH TCC 51 51 51 51 only.
GSM1800 MACRO NOTE: trial fo
45 45 45 45 53
(RBS2202/2106/2206)
GSM1800 MACRO WITH TCC 49 49 49 49
GSM900 MACRO (RBS2207) 47 47 47 47
GSM1800 MACRO (RBS2207) 45 45 45 45
CLUSTER BSTXPWR 0 TO 80 dBm
STREETCELL
(RBS2302/2306/2308) 33 33 33 33 53
INDOOR CELL
33 33 33 33 53
(RBS2302/2306/2308)
STREETCELL (RBS2309) 37 37 37 37
INDOOR CELL (RBS2309) 37 37 37 37
INDOOR . MICROCELL OUTDOOR As per RF As per RF As per RF
As per RF design. 53
USED FULL BTS design. design. design.
COMMON PTIMBQ 0 to 600 ALL CELLS 15 15 15 15 Seconds 10 Penalty time when handover due to bad quality.
Penalty time when handover due to too large timing
COMMON PTIMTA 0 to 600 ALL CELLS 30 30 30 30 Seconds 10 advance.
Signal strength penalty at handover failure.
This penalty is valid during PTIMHF.
When a handover to a cell fails due to signalling failure, a
penalty is assigned to that cell to avoid that the MS returns
COMMON PSSHF 0 to 63 ALL CELLS 63 63 63 63 dB 63 to it immediately. The penalties are an amount of
COMMON PTIMHF 0 to 600 ALL CELLS 15 15 15 15 Seconds 15 Penalty time at handover failure.
GSM900 55 55 55 55 Quality limit downlink for handover. Urgency detection
parameter.
Deci
transforme
COMMON QLIMDL 0 to 100 d GSM 55
GSM1800 55 55 55 55 quality
units (dtqu)
ALL CELLS EXCEPT INDOOR 24 24 36 36 SACCH Radio link time-out. The maximum value of the radio link
52 (RAO counter for the uplink
CLUSTER RLINKUP 1 to 63 INDOOR 32 32 32 32 periods recommendation)
IDR 36 36 36 36 (480ms).
ALL CELLS EXCEPT INDOOR 24 24 36 36 SACCH Radio link time-out. The maximum value of the radio link
CLUSTER RLINKUPAFR 1 to 63 INDOOR 32 32 32 32 periods 52 (RAO counter for the uplink for AMR FR connection.
(480ms). recommendation)
IDR 36 36 36 36
ALL CELLS EXCEPT INDOOR 24 24 36 36 SACCH Radio link time-out. The maximum value of the radio link
CLUSTER RLINKUPAHR 1 to 63 INDOOR 32 32 32 32 periods 52 (RAO counter for the uplink for AMR HR connection.
(480ms). recommendation)
IDR 36 36 36 36
ALL CELLS EXCEPT INDOOR 24 24 36 36 SACCH Radio Link time-out. The maximum value of the radio
52 (RAO downlink counter.
CLUSTER RLINKT 8 to 64 in steps of 4 INDOOR 32 32 32 32 periods recommendation)
IDR 36 36 36 36 (480ms).
ENABLED, PSKONBCCH I
COMMON PSKONBCCH ENABLED ENABLED ENABLED ENABLED ENABLED - ENABLED s used to disable the use of 8PSK on the BCCH carrier.
DISABLED Note: if EDGE is activated, set to ENABLED.
CSPSNOPRF,
CSNOPRFPSFIRST,
CSNOPRFPSLAST, This parameter determines if non-hopping TCHs
COMMON CSPSALLOC CSFIRSTPSNOPRF, ALL CELLS CSPSNOPRF CSPSNOPRF CSPSNOPRF CSPSNOPRF - CSPSNOPRF on the BCCH frequency should be selected first,
CSFIRSTPSLAST, last or if there is no preference at CS and PS
CSLASTPSNOPRF, allocation
CSLASTPSFIRST,
CSLASTPSLAST
COMMON QDESULAFR 0 to 70 ALL CELLS 20 20 20 20 - ACTIVE, INACTIVE Desired quality, uplink for AMR FR connections.
COMMON AMRPCSTATE: ACTIVE, INACTIVE ALL CELLS INACTIVE INACTIVE INACTIVE INACTIVE INACTIVE Dynamic MS power control state for AMR
SDCCH power control switch. Identifies if power control
COMMON SDCCHREG ON, OFF ALL CELLS OFF OFF OFF OFF - OFF on SDCCH is allowed on non-BCCH frequencies.
GSM900 MACRO 95 95 95 95 Defines the target value for the desired signal strength
GSM1800 MACRO 92 92 92 92 downlink as measured by the MS in different parts of the
power control interval.
GSM900 STREETCELL 75 75 75 75
CLUSTER SSDESDL 0 to 150 dBm 92,95
GSM1800 STREETCELL 75 75 75 75
GSM900 INDOOR 70 70 70 70
GSM1800 INDOOR 75 75 75 75
SACCH Regulation interval, downlink.
COMMON REGINTDL 1 to 10 ALL CELLS 1 1 1 1 periods 1 Defines the minimum interval between power order
(480ms) commands.
COMMON QDESDLAFR 0 to 70 ALL CELLS - ACTIVE, INACTIVE Desired quality, downlink for AMR FR connections.
COMMON QOFFSETULAFRN −50 to +50 ALL CELLS 0 0 0 0 dB 0 Offset for quality uplink for AMR FR connections.
COMMON QOFFSETULAFRP −50 to +50 ALL CELLS 0 0 0 0 dB 0 Offset for quality uplink for AMR FR connections.
COMMON QOFFSETDLAFRN −50 to +50 ALL CELLS 0 0 0 0 dB 0 Offset for quality downlink for AMR FR connections.
COMMON QOFFSETDLAFRP −50 to +50 ALL CELLS 0 0 0 0 dB 0 Offset for quality downlink for AMR FR connections.
Offset for signal strength uplink for AMR FR connections.
COMMON SSOFFSETULAFRN -30 to +30 ALL CELLS 0 0 0 0 dB 0
Offset for signal strength uplink for AMR FR connections.
COMMON SSOFFSETULAFRP -30 to +30 ALL CELLS 0 0 0 0 dB 0
Offset for signal strength downlink for AMR FR
COMMON SSOFFSETDLAFRN -30 to +30 ALL CELLS 0 0 0 0 dB 0 connections.
Offset for signal strength downlink for AMR FR
COMMON SSOFFSETDLAFRP -30 to +30 ALL CELLS 0 0 0 0 dB 0 connections.
COMMON DTCB -63 to 63 ALL CELLS -63 -63 -63 -63 dB NA Timing advance threshold. See the comments of LOL.
COMMON DTCBHYST 0 to 63 ALL CELLS 2 2 2 2 dB NA Hysteresis for timing advance.
COMMON NDIST 0 to 63 ALL CELLS 10 10 10 10 dB NA Timing advance threshold. See the comments of LOL.
COMMON NNCELLS 1 to 5 ALL CELLS 3 3 3 3 - NA Hysteresis for timing advance.
CHRATE
SDCCH Level.
Level of remaining SDCCH subchannels when an attempt
to increase the number of SDCCH/8 by reconfiguring a
COMMON SLEVEL 0 to 2, CONG. ALL CELLS 1 1 1 1 - 1 TCH to an SDCCH/8 will take place.
Search priority.
Indicates if 3G cells may be searched when BSIC decoding
is
required.
NO Multi-RAT MS may not use the search frames required
for BSIC decoding, for UTRAN FDD measurements.
COMMON SPRIO NO, YES. ALL CELLS Yes Yes Yes Yes 0 YES Multi-RAT MS may use up to 25 search frames per 13
seconds wit
Multi-Rat reporting.
FDDMRR defines how many measured neighbouring
UTRAN cells should be included in measurement reports.
COMMON FDDMRR 0 to 3 ALL CELLS 0 0 0 0 - 0 The remaining positions in measurement reports will be
used for reporting GSM cells according to the parameter
MBCR. If there are sti
7 14 dB
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
.....
15 -84 dB
dB
GSM900 COLOCATED 0 0 0 0 0
(positive)
Defines the difference in pathloss between the BCCH
dB frequency band group and the non-BCCH frequency band
CLUSTER FBOFFSP -40 to 40 GSM1800 COLOCATED 16 16 16 16 0 group. Positive values are used when the BCCH frequency
(positive)
band group is assumed to offer "better" coverage than the
dB non-BCCH frequency band group.
GSM900 NON COLOCATED 0 0 0 0 (positive) 0
dB
GSM1800 NON COLOCATED 0 0 0 0 (positive) 0
GSM900 COLOCATED 0 0 0 0 dB 0
(positive)
Defines the difference in pathloss between the BCCH
dB frequency band group and the non-BCCH frequency band
CLUSTER FBOFFSN -40 to 40 GSM1800 COLOCATED 0 0 0 0 (positive) 0 group. Positive values are used when the BCCH frequency
band group is assumed to offer "better" coverage than the
GSM900 NON COLOCATED 0 0 0 0 dB 0 non-BCCH frequency band group.
(positive)
dB
GSM1800 NON COLOCATED 0 0 0 0 (positive) 0
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
LAPDm It is used to control the max length of the GPRS signalling
As planned As planned As planned As planned As planned frames 5 messages sent on the FACCH.
MAXLAPDM 5 to 12
it is used as a preference at a DTM channel allocation in
some situations ; whether the TCH (CS part) in a DTM
As planned As planned As planned As planned As planned - QUAL connection shall be allocated with max specch quality
considerations or with packing considerations (to prefer a
TCH/HR)
ALLOCCPREF QUAl, PACK
As planned As planned As planned As planned As planned - - defines the optional DTM multislot classes supported in a
OPTMSCLASS 11 cell.
As planned As planned As planned As planned As planned - - defines for which the optional DTM multislot classes shall
OPTMSCLASSAD 11 be added in a cell.
defines for which the optional DTM multislot classes shall
As planned As planned As planned As planned As planned - -
OPTMSCLASSREM 11 be removed in a cell.
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
COMMON PRIOLEV 1 to 14 BSC level AS PLANNED AS PLANNED AS PLANNED AS PLANNED - - this parameter determines the priority level
COMMON BSC level AS PLANNED AS PLANNED AS PLANNED AS PLANNED - 28 this parameter determines the max time it is allowed to do
QASSTIME 1 to 60 assignment for a priority connection
channel resource limit. It indicates the percentage of radio
channel resources, TCH/F and TCH/H, that are allocated to
COMMON all cells AS PLANNED AS PLANNED AS PLANNED AS PLANNED - 25 priority connections before starting to give available
channels to non priority connections.
RESLIMIT 1 to 100
max queue length in a cell. It determines the max number
COMMON all cells AS PLANNED AS PLANNED AS PLANNED AS PLANNED - 5 of priority connections (PC) that can be inserted in the
QLENGTH 0 to 32. queue.
INTERNAL CELL RELATIONS Omitted Omitted Omitted Omitted AS PLANNED The parameter is only specified when the relation is one
ADJACENCE RELATION SINGLE, Omitted. - way
EXTERNAL CELL RELATIONS SINGLE SINGLE SINGLE SINGLE AS PLANNED
cell → cellr. This means that offset and hysteresis
Co-site, which indicates if a cell shares the same site as its
parameters
ADJACENCE CS YES, NO PER CELL AS PLANNED AS PLANNED AS PLANNED AS PLANNED AS PLANNED neighbour.
are only defined in one direction.
RELATION is always set to single for external cells, i.e.
neighbouring cells that belong to anot
ERICSSON RECOMMENDATION
Element Range CONDITION Unit Current setting Remarks
Dense Urban Urban Suburban Rural
Candidate type.
Indicates in which cases the related cell shall be treated as
a possible handover candidate.
ADJACENCE CAND AWN, NHN, BOTH PER RELATION BOTH BOTH BOTH BOTH - BOTH AWN Neighbour at assignment to worse cell.
NHN Neighbour at normal handover and
Trial to be performed
REMARKS
trial to 1 BSC
REMARKS
REMARKS
REMARKS
REMARKS
REMARKS